| |
| |
| |
|
Page: 1 2 3
Comments:
<0> go
<1> Change it to the router you will use
<2> intuitive it worked
<2> i reached the configuration page from SBC
<2> it appeared my old user Id and p*** workd
<2> and a boton saying login
<1> cool,
<2> my DSL light in siemens modem is blinking
<2> though
<1> so it runs the same protocol as your ISP
<2> whats the next step then? to login?
<2> and what changes i have to make?
<1> to login to what?
<2> to login to configure the modem
<2> the siemens one
<1> you have a modem connected to a router?
<1> or, two routers?
<2> no i have 1 switch
<2> and the zoom modem/router
<2> and this one siemens i just pluged to the switch
<1> seimens router or modem?
<2> i dont know that
<2> when i was in houston
<1> in any case;
<1> have you changed its LAN IP address?
<2> it worked with just my modem and net network card
<1> [15:40] <1> One can be 192.168.1.1, the other can be 192.168.1.2
<3> What are you doing?
<2> lets say 1.1 its Zoom modem
<2> and u r saying to chante the siemens one to 1.2?
<2> how can u do that?
<3> What are you trying to do?
<3> 2 WANS over 1 network?
<2> yeah i dont understand that part intuitive, u r saying i can work with 2 modems?
<2> but i only have one dsl line
<1> No
<1> That was just to put them on the same subnet, so you don't have to change you IP every time you want to configure one
<1> With one DSL line, you can only use one at a time.
<2> oh ok
<2> but if i change to 0.x i wont be able maybe to conect to internet since
<2> my provider ***igmed 20 ips of the form
<2> 192.168.1.x
<2> which are dhcp dynamic
<3> 192.168.1.x are internal IPS
<3> your ISP has nothing to do with em
<2> so what changes i have to make to change the siemens modem one instead of the zoom
<2> every time zoom overheat for example
<1> the DSl cable
<1> set them up to both connect to your ISP
<1> when one goes down, change the DSL cable to the other router. Simple.
<2> intuitive so what will happend if i just unplug the zoom modem
<2> and plug my siemens one to dsl cable?
<1> Have a guess
<2> will i be able to conect to internet?
<1> It will connect to the Internet
<1> Yeah;
<2> so the dhcp server will reasigned the modem its own ip?
<2> like 1.1?
<1> no
<1> There is a DHCP server at your ISP, and probably one on each Router.
<1> The ISPs DHCP server ***igns an Internet IP to your Router (which has a LAN & WAN IP)
<1> and the Routers ***ign a LAN IP to your PC.
<1> You will have to set redundant gateways in your TCP/IP configuration
<1> So that when one goes down, it will automatically switch to the other
<3> ISP ---->>> DSL ---->>> Router --network
<2> how do u set redundant gateways in the tcp ip configuration?
<1> open the advanced properties of your TCP/IP config.
<2> ok
<2> u mean in the second tag
<2> alternative configuration?
<1> nope
<1> Ok, set yourself a Static LAN IP.
<2> just in general
<2> ok lets say 192.168.1.4
<1> sure
<2> is that ok?
<1> yip
<2> the subnet mask?
<1> same as the routers :)
<1> 255.255.255.0
<2> ok
<2> then?
<2> the usual dns?
<1> advanced properties
<1> that of the router which you will use the MOST
<1> you'll need a redundant DNS & gateway to use
<2> ok im in advance properties
<2> it has add options
<2> in ip and gateways
<2> i add the usual gateway ip wich is 1.1 one right?
<4> hey intuitive
<0> intuitive im on advance configuration
<0> with no dns yet so whats next
<0> my ip is 1.4 and the gateway 1.1
<0> and then?
<4> hey intuitive you there
<0> haha
<0> intuitive u cant go in the best part
<0> he said redundant gateway what does he mean
<0> to add 1.1 again?
<1> here
<1> hi Nicholas_, wow, ltns
<1> one gateway is 192.168.1.1, the other 192.168.1.2
<1> same as DNS
<1> But you have to change the IP of the other router
<1> It's taking you a long time.
<0> but how do u change the ip of the other router?
<1> login to the ADMIN PAGE!!!
<0> ok let me try it
<1> Please, please do.
<0> u have to consider that u r telling me in english i speak spanish
<1> oooh ok
<1> you speak good English though
<5> hi
<1> ehlo drevlan
<5> should get my new toy tomorrow
<1> oo, the screen?
<5> the wacom device
<0> @find yardbirds
<1> what?
<0> sorry wrong chan
<0> intuitive i couldnt log in
<0> do i have to reset?
<1> login to what?
<0> reset the modem?
<0> to the modem configuration page
<1> did you type the IP on your web browser?
<0> to change the ip as u told me
<1> which router IP?
<0> yes it appears me the page of my previos american isp
<1> what IP is your computer now?
<0> the siemen one
<0> it seems that page it is from the ISP and not the original one of the modem
<0> couse according to the manual it had another format
<0> this page is from the Texan SouthWestern Bell company
<0> it has some bottons to configure the modem
<0> but i cant login
<1> did you change your PC IP to the same network as the router?
<0> do u want me to send u the page?
<1> no i don't
<0> yes
<1> why? Don't know the p***word?
<0> it appears the SBC logo
<0> and appears this mesage
<0> Can not connect to target service. Please contact your Service Provider's help desk
<0> this seems an intranet page from SouthWestern Texan Bell company
<0> and not the original configuration Web page of siemens
<0> thats why i cant login maybe
<0> couse it had the login info of my previos ISP
<0> which of course they already deleted from their database
Return to
#networking
or
Go to some related
logs:
#MissKitten
#networking
dj misskitten
You need the openssl PHP extension to use SMTP/IMAP TLS!
likes: dirty socks
#linux
#AllNiteCafe
#linux
focus +before onclick
#linux
|
|