| |
| |
| |
|
Comments:
<0> Eol: u there?
<1> sup
<0> going to colo tonight
<0> in 5 hours
<0> ****ing intarweb
<2> the intarweb is fine
<2> :P
<2> now.. the UnderNet on the other hand
<2> :P
<1> kk @ later
<1> what time about ... midnight eastern?
<0> yeah, midnight eastern....more accurately, bout 12:20 eastern
<1> kk
<1> will just kill it later
<1> how long you expect to be down?
<1> e.g. don't want to be putzing with it whle you are messing with it
<1> 2am good time to bring it back up? (your time)
<1> or later
<1> earlier
<0> will u have irc access at all, or no
<0> cuz if yes, i'll just /msg you to tell you when its good
<0> cuz at the same time tonight, we're gonna rewire all the power for the cabinet
<1> ja
<1> just msg me
<1> if you get bored also, how about ssh'ing the term server and ssl'ing the pdu ;)
<0> pdu has no ssl capabilities
<1> (as for me, i just need firmware update bios, nic, and at least 3 more public ip's)
<1> kk @ pdu
<0> term server, i gotta get around to upgrading the mem/flash
<1> and if you real bored, convince him to hire me ;)
<0> actually, my job we've got a spot opening
<0> 3rd shift m-f
<1> hmmm..what you do
<0> hardware
<0> nope
<1> as in NOC hardware support?
<0> we do installs, upgrades, repairs, 1st level tech support before sys goes to true sysadmins
<1> hmm..whatcha all paying
<0> and LOTS of paperwork
<0> pm
<1> is that short for peanuts ;P
<0> no, privmsg
<1> ja..was just giving you **** ;)
<1> @ WTF does pm mean ;)
<3> Hello all..I have a linksys WAP54G acceess point that I am trying to make be a repeater for my WRT54G router...i've done it before but it's been a while...in the access point when it asks for the mac address for the local LAN is that not the wireless mac address for the router?
<0> sup drev
<4> could someone help me out setting up my network? all i need is the addresses i use
<5> okay tell mehow your two pc's are connected, via a switch, crossover cable, etc
<4> crossover
<4> this computer has 2 network cards
<4> so i bridged it
<4> one for internet and one for the network
<5> okay
<4> its saying the cable isnt plugged in >_<
<5> hmm, sure you have a crossover cable and not a straight through?
<4> i sure do
<4> i used to use it with my old laptop
<5> well lets add the networking settings so long and we can focus on the cable after that
<5> pc1:
<5> ip: 192.168.10.1
<5> subnet: 255.255.255.0
<5> this is the pc connected to the internet, you will add these settings to its internal interface (network card that isn't connected to your router/modem/..)
<5> pc2:
<5> ip: 192.168.10.2
<5> subnet: 255.255.255.0
<5> after that its time to address the cable problem
<6> sorry had to remove bridge
<5> do you have your old laptop to test the cable with? or a spare crossover
<6> i got as far as [17:50:16] <5> subnet: 255.255.255.0
<5> ahk
<6> nah, took it in and couldnt afford to get it out of the shop so i think they sold it :P\
<5> if loan sharks did i.t lol
<6> it was there for 6 weeks :P
<4> argh
<4> i undid the bridge and it wouldnt let me to connect to the net again untill i unpluged the network card
<4> right, everything is sorted now
<4> the question is... how do i share files
<5> http://www.practicallynetworked.com/sharing/xp/filesharing.htm
<5> http://support.microsoft.com/kb/304040/
<4> wtf
<4> ive lost my dns
<4> then i unplug the cable and it works fine
<4> >_<
<4> whats goin on
<7> !country lb
<8> Country name for .LB is LEBANON
<9> !country kg
<8> Country name for .KG is KYRGYZSTAN
<10> SarcastikuS dont msg people without asking
<11> help sos
<10> SarcastikuS umm what?
<10> you need to tell us before we can help
<11> im Hugo 29 Angola
<11> Networking and Telecommuncations
<5> this a job ad?
<11> do you know the software Freeping Ver.2 ????
<11> no
<11> i control 360 internet sites arround angola
<11> e need to ping the modems all the time to check connectivity
<11> re
<11> so i need a software that can do that
<11> Free ping doest saves records
<5> nagios
<11> and load
<5> cacti
<5> u could do ur own little .sh script without all too much work
<11> we use Cacti
<11> but to other systems
<11> for Large companies
<11> this is small enterprises and medium
<11> for Cacti you need to use SNMP with Cisco routers
<5> u don't neeed cisco routers
<11> im not using routers
<5> use nagios
<11> just modem terminals
<11> www.nagios.com?
<5> www.nagios.org
<11> do i have to pay?
<11> to monitor the sites im using windows XP Pro
<5> nao its free
<11> not Linux
<5> the app is open source
<5> ahh kk
<5> ummm
<5> let me think
<5> there is solarwinds network monitor that i've used but only for routers, i doubt ti can do what u want it to do
<11> im using freeping ver.2
<11> but the problem is that im allways changing computers......4 in 4 months
<11> i just have to save and load the records in other pcs
<11> ok...let me search and read about nagios
<5> hello nemo
Return to
#networking
or
Go to some related
logs:
#chatzone
sendmail dead but subsys locked
#java
ubuntu fbdev ati restore
fc5 init 3 problem
st0a st0l st0m
#MissKitten
xeba mobiles
your2ndgirl
#AllNiteCafe
|
|