| |
| |
| |
|
Page: 1 2 3 4 5 6
Comments:
<0> nope
<1> :)
<1> have a log on that dcc of your?
<1> check the log
<0> wizardul: the dccprotocol works a bit 'backward' .... the 'sender' only sends a request.. the 'receiver' is the one that actually makes the connection.. so a dcc send is an INCOMING tcp connection.. and a router/firewall STOPS it unless configured to accept it.
<0> wizardul: ctcp and dcc protocol specs -> http://www.irchelp.org/irchelp/rfc/ctcpspec.html
<1> in order to establish the connection you send a syn and receive an ack then send a syn ack ...anyways once the connection is established you'll get a request to check the shares...long story ...partially you're right
<2> hi
<0> wizardul: the sender sends a ctcp to initiate the dcc, the "receiver" is the one making the actual tcp connection based on the info received from the sender telleing the "receiver" what port and IP ythat client has to connect to in order to "get" the file or chat
<0> So basicaly, if you can't send or start a dcc chat it's your settings, if you can't accept sends or chat's its there setting.
<1> true but you need to initiate the connection you know what I n]mean there are 2 phases on the actuall connection one you as new joiner initiate and the seciond one checking if you are allowed
<1> the fact and the matter is that for you to be able to receive you should be able to share
<1> to share you need outbound connection open
<1> to receive you need inbound
<1> the relationship between them is direct so it will not work one without another
<0> Wrong, there is no dcc allow here on undernet
<0> We use the raw DCC specs as defined in the RFC above
<3> Wizardul, you don't know what your talking about. I use a router and only have to bind the incomming port to send a file. To receive a file I don't have to do a thing unless they are using reverse dcc because they don't know how to configure their firewall/router.
<1> man we are talking diff languages ...you are ***uming that he/she wants to use dcc here ...wrong if anybody asks you a question think of what they ask
<4> well, i have used dcc before i got the firewall
<0> kinsey: exactely :)
<3> And mirc's dcc ports, since 6.14(I think), are in Tools>Options...>Connect>Options>Advanced... and the defualt I believe are 1024-5000
<1> you might be right Kinsey...I do not know for sure the settings
<0> Not to smart to open and route all those 1024-5000 ports though
<1> well that's a range not a must
<3> That's why I'm not sure if those are the defualt ;)
<1> good is not 1-65535
<3> I changed my range hehe
<1> :P
<0> Yes they are the default
<1> I would guess it depends on the hub that you connect to
<3> You can't use dcc send or initiate a dcc chat if you have a hub, I wouldn't think.]
<3> Hubs only share a connection but down allow any actual forwarding of ports for incomming connections.
<1> so finaly what is the required port setting to properly use dcc...Kinsey...I was talking about the dcc hubs ;)
<3> Ditch the hub and get a router...
<1> and a hub is a dumb device does act as a cable extension does not interfere with the packets in any way
<1> diffrenet layers bro
<1> :)
<0> wizardul: DCC stands for Direct Client to Client, but again, read the protocoll page I gave you 30 min ago
<4> oki am back
<3> wb
<4> sorry i stirred up a bees nest!
<4> lol
<1> got that man
<1> I know what dcc stands for I am afraid you do not understand how that is working though ...no offence intended
<1> offense
<1> sorry
<0> lol
<0> Don't worry Wizardul :P
<1> I am far from being worried :) thanks anyway for the link
<5> set nanny2
<3> Wish you could split a broadband Internet connection (i.e. cable modem, DSL, etc.) with multiple PCs? You can with the Leviton 10/100Mbps 4-Port Internet Gateway. This gateway, also known as a router,
<4> thats what i have
<4> do u have that one?
<3> As I said, your the one who doesn't know what yoru talking about Wizardul...
<3> A router is not a hub.
<3> Yes he does need to port forward and no he does not need this PAT thing your talking about.
<6> i'd liek to recommend www.portforward.com :)
<4> port frwd doesnt have my unit on it
<4> i was on there
<7> Julie2 !!!!!!!!!!!!!!!!!!!
<7> <\__/>
<7> / __ \ I WANT TO HUG YOU!
<7> ___\ (oo) /___
<7> >| |<
<7> | JE |
<7> / __ \
<3> Do you have it's users manual Kayfrnd?
<4> yes, but it is 3 pages
<3> That's not much of a manual..
<4> nope no help there
<3> Does it tell you how you need to connect to it to set it up?
<4> oh sure, i have it connected now
<3> I don't mean physical connection, but to log into it's interface
<8> hola
<9> ils
<3> The online manual I found is 11 pages
<3> Hmm wonder when he'll be back
<10> w
<4> hi again
<0> hi kayfrnd anything mIRC related we can help you with?
<1> Dutch I would respectfully to help yourself first kayfrnd got connected ...thaks for sharing baba
<1> no need to swet
<0> wizardul: duno what you have been drinking but I want that too, sounds fun
<1> US water bro... but the one that makes you bright not dumb
<0> You sure hit the wrong bottle
<1> perhaps strange is that the effect is the same ... can't you tell ...guess not since you donno understand a bit
<1> oh...and these romanians could teach a networking lesson any of us ...nu-i asa baieti?:)
<3> Where is mirc's timeout value?
<0> Timeout for what?
<1> :)))))))))))))))
<3> Before it loses connection
<1> Kinsey if you don't know to say it in dutch don't bother the man
<0> kinsey: nothing you can do about that, it's just a 9 year old bug [10053] ...
<1> dutch is called keep_alive somethimes
<1> try cisco icnd maybe you get a hint'
<1> ups
<1> you donnt know what cisco is
<1> do you?
<1> is cisco bro not sisco the vegetables company :)
<3> My client with NNscript installed doesn't lose connetion when my DSL goes out of sync but a mirc with no script loses connection :-/
<1> true Kinsey
<1> the solution you are looking for depends on the mirc client you're usinfg
<1> should be available on settings for that specific client
<0> kinsey: read about it at http://www.user-com.undernet.org/documents/quitmsg.php or for technical info http://www.sockets.com/err_lst1.htm#ErrorDescriptionList
<1> here we go ...he's google addicted :))))))))))))
<1> good job man
<1> keep reading in anoptyher 40 years you'll know the packet structure on layer 7 as well
<1> :)))))))))
<1> another 40 years to go dutch
<1> go go go
<1> I am 9 y old when I was 7 I was gogle happy like others that still are ...however I grew and I know ...stuff ...unlike others :)
<3> :( wish there was something I could do about it.
<1> about what Kinsey
<3> You know stuff but not this? Oh well.
<1> I might know it ...try me
<3> Typical of a 9 year old. That whole 10 second attention span thing.
<1> yeah I am a genious
<1> :))))\
<3> Right Dutch?
<1> are you guys graduated from the same school?:O
<1> whatever
<1> ....
<3> Nope
<1> wish you luck
<3> My recient router firmware update alteast lets me resync without needing to establish a new connection.
<11> hello
<0> hi jon` anything mIRC related we can help you with?
<11> no thanks =)
<0> ok
<11> thanks :)
<0> no problem :)
<11> join #cs.fi
<12> really?
<12> hehe
<13> jaytea :)
<14> hi
<15> ykfl
<15> bbbbbbbbbbbbbbaaaaaaaaaaaaaa
<15> iiiiii vreun roman
<16> magic-
<16> bro prv 2 min
<13> road^bump :-)
<13> Julie2 :)
<13> free :)
Return to
#mirc
or
Go to some related
logs:
#chatzone
missbambina
davao seb
vrea cruz mexico
#linuxhelp
What major island lies 250 miles off the south eastern coast of Africa ?
girlofbrazil
ping dendmsg operation not permited
poople cam
#AllNiteCafe
|
|