| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9
Comments:
<0> I'm trying to use a wireless car on 2.4 and I'm not sure what tools i need to use to set it up
<0> card*
<0> ifconfig? dhcpcd doesn't start packet flow
<0> any suggestions?
<1> iwconfig
<2> Wireless is crap and I'm not getting it until the next generation comes out. :P
<1> Demonen why u say that ?
<1> wireles is a cool thing for networks
<1> i runed an outdor wireles network for 2 years had very little problems
<2> LittleJ: Because I usually spend 2-3 hours a day troubleshooting stupid wireless stuff. I hate the whole god damnened system.
<2> allmost nobody follows the standards, and it's all mix-and-match, so nothing really REALLY works.
<1> Demonen well i havent had that problems...so i say wireles is ok
<2> Well, I work with it for a living, and I hate it.
<2> And they can take their stupid WEP and stuff it up their noses. It's just about as secure as whispering to eachother in a public place: If someone wants to hear the whole conversation, they're gonna.
<2> Don't get me started on WPA
<1> :D
<0> thanks
<3> But WPA is cool, man.
<2> danq: Oh no you don't. *not biting*
<3> haha
<1> hahahah
<1> :D
<0> iwconfig gives me a " lo no wireless extensions" i hae a feeling this is going to be a driver nightmare
<1> ryan__ what card type you have ?
<0> d-link dwl-g650
<1> u have linux drivers for it ?
<0> laptop
<0> i haven't started looking until now
<0> hmm... kernel 2.4 doesn't seem to have a module
<1> well u might look i had few problems with rtl...but found ndiswrapper wich emulates xp drivers for linux :P
<1> !ndiswrapper
<4> from memory, ndiswrapper is Some vendors do not release specifications of the hardware or provide a linux driver for their wireless network cards. This project provides a linux kernel module that loads and runs Ndis (Windows network driver API) drivers supplied by the vendors.
<0> i'm not familar with Ndis
<0> !Ndis
<4> extra, extra, read all about it, ndis is (Network Driver Interface Specification) This spec was designed by Microsoft to allow multiple protocols to easily communicate with Network Interface Cards (NICs) without knowing anything about those cards. In theory, you just have to install the NDIS driver for the particular NIC and you can bind multiple protocols to it. ...
<1> u might check : http://www.linux-wlan.org/docs/wlan_adapters.html.gz
<5> i am running centos and i need some help setting up the ssh/telnet server if somone has a link to where i will find that it would be apriciated
<1> i think u'r adapter is ther ryan__
<0> what does it mean when is says " no wireless extensions"
<0> the driver might not be a problem at all, It's slackware which normally keeps most popular modules activated anyways
<1> ryan__ as u wish....when it says no wireless extension the problems is that aint finding any wireles interface
<6> hello
<1> i had this problem...too if u'r manufacturer aint suporting with linux drivers...u might wana try ndiswrapper
<0> ic
<0> i might need to update to 2.6
<6> how can i close 25 port, when the qmail is stopped and no services is listening on it ?
<1> ryan__ u might try but i'm 90% sure u aint gona get any suport
<7> Yxaaaaaaa, why care?
<7> if nothing is running on it
<7> on port 25 I mean
<6> there is only process "supervise qmail-smtpd" and i cant stop it
<0> ok
<6> any idea how can i stop supervise * ?
<0> ok
<8> where can I fount the package libxxf86dga1 ?
<0> is the Ndis wrapper in 2.4?
<7> hmmmm short of setting up a cron script that checks for a listener on port 25 then issues an iptables command, I have not idea
<8> I'm using Debian, but apt-get could not find it.
<8> I tryed to google it, but nothing.
<9> Hello, I want to install debian, what kernel I should install, 2.4 or 2.6?
<0> !ndiswrapper
<4> extra, extra, read all about it, ndiswrapper is Some vendors do not release specifications of the hardware or provide a linux driver for their wireless network cards. This project provides a linux kernel module that loads and runs Ndis (Windows network driver API) drivers supplied by the vendors.
<2> AKQJ10: What are you using it for? Server or desktop?
<2> for server or workstation, I'd still go for 2.4, but for a desktop I belive 2.6 to be better.
<9> demonen, its a laptop( presario amd 900 mhz powernow)
<8> AKQJ10, probably the 2.6 is what you want.
<2> AKQJ10: Allright, 2.6, then
<8> Demonen, why would you go for a server with 2.4 ?
<2> zephyr_: still some oddities in 2.6
<8> oh ... OK.
<2> I guess it's more than stable enough, but I'd go with very VERY well tested kernel for production.
<9> what ok, thanks!
<9> -what
<8> where can I fount the package libxxf86dga1 ?
<8> I'm using Debian, but apt-get could not find it.
<9> http://packages.debian.org/unstable/libs/libxxf86dga1
<9> unstable
<8> packages.debian.org is down at the moment due to performance issues.
<8> We apologize for any inconvenience and hope to have service restored as soon as possible.
<9> I am in
<9> do you want a dcc?
<9> its only 195 k
<8> AKQJ10, could you send it in email?
<8> My DCC is not wortking ..
<9> dcc send?
<9> ok
<9> mail
<9> noup
<9> packages.debian.org is down at the moment due to performance issues.
<9> :(
<8> see ...
<8> that's what I'm saying ...
<8> Package libxxf86dga1 is not available, but is referred to by another package.
<8> This may mean that the package is missing, has been obsoleted, or
<8> is only available from another source
<8> what could this mean ?
<8> I mean I get thin when i try apt-get install libxxf86dga1
<9> xlibs-static-dev
<9> ibXxf86dga, an implementation of XFree86-DGA, a direct graphics (device)
<9> access extension;
<8> so I should get x-libs-static-dev instead?
<9> I would try
<10> Is there any way to take a pre existing system, with one large partition, and repartition it so you have /home/, /tmp/ etc... on different partitions, and does anyone know of a good text on how to do it, and what's a good partition scheme i.e. how many bytes minimum for /home, or /tmp, etc?
<11> Does anyone know anything about prelink?
<11> !prelink
<4> prelink is, like, something what will break rpm -V
<11> prelink?
<4> [prelink] something what will break rpm -V
<12> Distro: RHEL4 - Question: Does anyone know what package (RPM) provides rrdtool?
<13> Anyone here ever got a broadcom WLAN NIC driver working on a 64bit system using ndiswrapper?
<14> hello
<14> anyone online ?
<15> yep
<14> i dont have tar -zxvf on my machine
<14> where can i download it from internet ?
<16> '-zxvf' is option. why not have tar installed?
<14> because i was stupid and i was deleted it
<14> :(
<14> and i dont have the cd`s with linux at me
<15> check you disro's official site
<14> from?
<15> distro even
<14> is any site from where can i download tar ?
<16> lol
<15> what ever distribution your useing
<13> Martineli google should be able to tell you.
<14> i dont have any descompressed program
<14> i was search on google but nothing
<14> you all are good on Linux ?
<13> no one here ever used ndiswrapper and a 64bit system?
<14> mmm
<13> Martineli: http://www.gnu.org/software/tar/tar.html
<13> wasn't hard.
<13> first result in google.
<14> thank you
<13> no prob. but searching google should come before asking in here.
<17> 'lo
<17> Guys, can someone tell me where to get updates for an old debian woody ?
<17> what repo
<3> Anyone know of a decent x-based util to make diagrams and such
<3> one oriented towards networks would be a huge plus
<18> Howdy
<11> danq: Excel
<17> danq search freshmeat
<11> danq: how about AbiWord? or mayby Koffice
<17> or OpenOffice ^_^
<3> I found dia
<3> looks to be kinda neato.
<19> hey..sed question -- im trying to delete every line in a file UP TO a given pattern. when that pattern is matched, i want to stop deleting
<19> how would i do it
<18> cyclic .. would it be as easy to 'save' the matched pattern to another file, then dump the entire original?
Return to
#linuxhelp
or
Go to some related
logs:
tifell
#apache
HELO GAGICA
blackberry lsusb
#AllNiteCafe
#php
#linux
Zejza
libc.6 2.3.2
javascript roadblock
|
|