| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9
Comments:
<0> so now "ping google.com" should work on the slackware box?
<1> but your better learning it
<1> what distro you running flush ?
<0> yeah ill read the man
<0> mandrake 9.2 here and slackware 8.1 on the right
<2> hi I have an old sony vaio laptop running ubuntu 5.10 which hangs about 50% of the time during bootup. If it gets past this point it works fine. Where should I look to narrow down the problem
<1> mandrake might be, service iptables restart
<1> no ide on slack
<1> idea
<0> well i guess it did not work
<0> to remove the commmands i did its "iptables -F" ?
<1> QuietFrank dmesg or in /var/log
<0> /usr/local/sbin/iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE
<1> flush yeah F is flush
<0> should i say "-o eth0" or "-o ppp0"
<1> eth0
<0> but youre aware that im using ppp0 as external connection right?
<1> yes
<0> k
<0> /sbin/iptables -t nat -A PREROUTING -i eth1 -p tcp --dport 1723 -j DNAT --to 192.168.0.5
<0> i use "-i eth0" and "--to 192.168.129.2"
<0> 192.168.129.2 = slackware // 192.168.129.1 = mandrake
<0> ?
<3> hi there
<4> hi Alexender
<3> well i am copying a folder files into another, is there any command to copy the new files and ignore the files which is already in the folder
<3> i used cp -R /home/file/* /home/alex/file/
<4> Alexender, you mean something like "skip copy when file exists"?
<3> yeah
<3> its all .jpg
<3> on file/
<4> with a bit of bash scripting that should be possible. i think there is "if exists"
<4> Alexender, or you just use "mc" (mightnight commander)
<4> that will ask what to do when a file exists
<4> errr, the program is called midnight commander
<4> it might be night, too
<5> Ahhh, ValeFiona you're back
<4> yes :)
<4> hehe, you male brat :-p
<5> (I'm Evil, remember)
<4> even trademarked!
<5> What could be more Evil than the plutocratic exploitation and abuse of intellectual property laws originally intended to protect artists, composers and writers?
<4> the payment of fees for usage of software? :)
<5> MSN!
<5> now that's EVIL
<5> "In partnership with AOL search", I though you were a *good* penuin grrl, WTF?!?
<5> _penguin_
<5> How can I corrupt your sublime and pristine innocence if you have already been seduced by the Dork Side(tm)?
<4> what? their link list about programming languages is quite good
<4> i think i start a (free) pascal revival when i find my old floppy disk with some old programs
<4> they got units for mysql, postgresql and oracle :)
<5> oracle -- that's heavy
<4> they are the database gods
<4> but i didnt read their license so far
<4> maybe its not so open than mysql
<5> ValeFiona, Oracle is entirely proprietary, and closed source and cost 10K$s
<4> nah
<5> unless you just mean client software
<5> OCDBA cert alone costs over 50k$ to attain, not counting time off work spent studying
<6> hi
<6> i can't find drivers for graphics card
<6> and im really really pissed off right now, can anyone help me ?
<5> =(
<4> http://www.oracle.com/technology/software/products/database/oracle10g/index.html
<5> g33k, what card and where have you looked so far?
<1> g33k drivers are basically modules
<6> EvilDucky-TM: ive got an acer travelmate 530 laptop
<6> its an intel graphics card
<6> ive looked on the acer website.. only got drivers for winblows
<5> Intel 810i?
<6> and on the intel ws
<6> 00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 01)
<6> 00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 01)
<5> g33k, did those lines come from lspci (if so your card is already detected and installed)
<5> !pastebin
<7> it has been said that pastebin is http://paste.getlinuxhelp.org/
<6> EvilDucky-TM: but not installed properly, aparently ive got 0Hz refresh rate
<6> and theres no aceleration
<5> also, please use a pastebin instead of posting multiple lines of copy-pasted text.
<6> the 0 refresh must be bull
<5> You have a flat panel (laptop screen, right)
<6> yeah
<5> 0 probably means 'adapter default' with that driver, though I can't say for sure
<5> Is it basically working with you jsut trying to 'tweak' it?
<6> it was saying 60 before i ran xorgconfig
<6> i have no aceleration though, do i have to mess around with xorg.conf?
<5> g33k, all flatpanels run at 60
<6> yeh, its not the refresh im bothered about, its the rest
<5> Well, to get 3D acceleration, you need an accelerated driver
<6> i ran the cedega tests and failed everything
<5> I don't know if one exists
<6> yeah, where can i get an accelerated driver?
<1> doesnt agpart do it ?
<6> when i was using win it was fine, so it must exist
<5> try searching the.x.org
<6> ScoT: whats agpart?
<5> ScoT, no. (Then how would old accelerated PCI bus or new PCI-X cards work)
<5> ScoT, he means agpGart
<1> 3d acceleration modules agpgart
<1> i havent got a laptop i'm only ***uming it did
<5> and it's always included with your chipset drivers, and required to use the full capabilities of an AGP (accelerated graphics port), but you still need an adapter specific 3D driver too.
<1> gotcha Evil
<6> so what can i do?
<5> Linux integrates AGP support nicely now since about kernel 2.4.x
<8> g33k http://ce.et.tudelft.nl/~pazaid/personal/linux/graph.html
<6> thx, i`ll have a look
<5> g33k, search for a driver is about all -- I recommend that you try forums and NNTP (e.g. Usenet), adn e-mail lists as well as the web.
<4> EvilDucky-TM, downloading Oracle 10g for 32bit linux directly from oracle now :D
<5> Ahhhh... the 'Express Edition'. Kewl.
<4> no the express edition, the release
<4> not
<0> ScoT: the thing is that its either slackware or mandrake
<0> ScoT: i cant access internet from both boxes atm
<0> PORTFW_TCP="113>192.168.129.2"
<4> i wonder if their solaris version only runs on SPARC boxen
<0> should i need to add something like PORTFW_TCP="113>127.0.0.1" ???????
<1> flush that only redirects 113 to the slack box (Identd)
<1> no
<0> well when the firewall script is activated
<4> flush, why dont you grab your favourite browser and lookup a nice tutorial about internet connection sharing?
<0> i can ping google.com from the slackware box, but on the mandrake box ppp0 isnt workin
<5> ValeFiona, I'd be very suprised since it's enterprise software primarily targeted at midframes and mainframes
<1> ppp0 must be working or you wouldnt be here
<0> i know but as i told you, i cant ping anymore
<0> cant load any web page
<0> until i turn off the firewall script, then slackware cant ping no more, but mandrake works
<1> you said it worked 5 minutes ago
<0> yeah but i didnt tried both at the same time
<1> what changed ?
<5> ValeFiona, what do you do when you get to the login page -- does your company have an Oracle account?
<0> nothing i just didnt realise i couldnt access internet from both box at the same time
<5> !slackware
<7> slackware is probably what we used to use before we had real distributions, or has 4,999 users, now that zatmac uses debian, or for the terminally masochistic, or if i want a copy of PV's harddrive, i ask him myself. "Slackware, because Linux is only free if you DON'T VALUE YOUR TIME", or so "secure" that you can't even do your work with it.
<0> in fact it does forward, but either one box or the other...
<1> is iptables running on slack also ?
<0> thats something i forgot to shut down
<0> gonna google hunt for it
<4> EvilDucky-TM, nah. no company stuff. you can enter bullocks in those fields. they dont even ask for a confirmation mail
<1> heh
<4> EvilDucky-TM, just go ahead and register an account and it will start sending the file
<5> hmmmm... bullocks...
<4> or is the word bollocks? :)
<1> flush i previously used that script i know it works, has to be the slack box
<5> if you're Brittish
Return to
#linuxhelp
or
Go to some related
logs:
#linux
#php
slackware mii-tool no link
#linuxhelp
mrc chating
#skype
damnation only ne demek
Server refused to allocate pty centos
1923 s-a nascut un mit
#linuxhelp
|
|