| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9
Comments:
<0> Redragon:iptables v1.3.1: Can't use -i with POSTROUTING
<1> or rearrrange the info some
<2> guess i have to hunt down something like bpg for dummies
<1> hmm on 1.2.8 here
<1> wonder why they would take that out
<2> POSTROUTING only knows -o afaik
<1> i use it with -i here on 1.2.8
<2> hmm
<0> so what to write then
<0> should i try that 192.168.2.1/24
<1> wait i lie
<1> so change that to iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE
<1> tojoe http://www.server-resources.com/lartc/
<2> doesnt work with -i on 1.3.3 either
<1> wrote it late last night so dont know if its totally confusing or not
<0> Redragon: Just that ? iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE ?
<1> yes
<0> then i get eth1 as gw ?
<1> on the laptop yes
<0> i test now
<0> Redragon: Thanks a lot. Your nice:)
<2> Redragon only found a typo so far
<1> where? and i'm not suprised hehe
<2> page 4, section 2, either it's -N or -n to create a new table
<1> thanky
<2> everything else looks good for my tired eyes
<1> i'm writing up a bash script for it atm
<1> based on the howto
<3> steady there sweetheart
<4> muleroni.
<3> danqyooo
<1> there http://www.server-resources.com/lartc/routing.txt
<5> hi all
<5> how open with iptables the port 2000 to ip 192.168.0.50 ?
<1> jak2000 you dont open a port with iptables, to open a port you run software that binds to the port and listens on it
<1> if you do not have software listening on a port then iptables can do nothing for you
<1> jak2000 you dont open a port with iptables, to open a port you run software that binds to the port and listens on it
<1> if you do not have software listening on a port then iptables can do nothing for you
<5> ok
<5> you know a software named freepops?
<1> nope
<4> sup, mule.
<5> http://www.freepops.org/
<3> danq, not much, face at the code monkey grindtone
<6> mewle!
<3> danq: app looking a bit pretty these days, many users 10K downloads
<3> gcbirzan: :)
<1> coffee time
<5> Redragon: better: http://www.freepops.org/en/download-linux.shtml
<4> which app, mule?
<3> oh, pida
<4> oh yes.
<4> very cool.
<7> as i was doing something,i removed maillog and know i dont know how to create a new one.When i create a new textdocument called millog,nothis is written on it.What can i do?
<4> syslogd will re-create it if anything is broadcasted to it.
<4> ok, i gotta go to work.
<8> It never recreates it for me... might depend on your config
<4> tomorrow is my last day
<4> har
<4> it doesn't create it when it starts
<4> it only creates the file when there's something that needs to go to it.
<8> still, I have to touch mine to get it to write to it after it's deleted
<8> maybe I'm using a different syslogd
<7> i made it thx.Syslogd recreates it if you restart it
<7> when i try to send a message from my pc to a user i maillog says relay=mail-relay.cytanet.com.cy. [195.14.130.157], dsn=4.0.0, stat=Deferred: Connection refused by mail-relay.cytanet.com.cy.
<7> why?
<9> paranomos: that host does not want to talk to you
<9> or perhaps your ISP wont allow you to, you probably cant tell the difference
<7> does it make any differnece if i am connected to the internet through another pc with a crosscable?
<8> no
<9> paranomos: probably not
<9> unless that PC blocks outgoing connections on port 25 with a connection refused message
<8> paranomos: you're most likely firewalled by your isp
<8> I'd say at least half of them don't like people running mail servers
<8> because I can connect to that mail server no problem from here
<8> % telnet mail-relay.cytanet.com.cy 25
<8> Trying 195.14.130.157...
<8> Connected to omiros.cytanet.com.cy.
<8> too bad they don't have port 587 open
<7> yes i know that i can connect like this
<8> from where?
<7> from my pc with telnet on that hostname
<8> how about telnet on that Linux box? Does it work from there?
<7> yes
<8> so when your mta tries to connect it refuses it, but it lets telnet through?
<8> from the same server?
<7> yes :0
<8> it must be magic
<8> do a sendmail -q and check the results again
<7> no wait
<7> i cant connect to the mail-relay.cytanet.comc.y but i can connect to the mail.cytanet.com.cy 25 which is the real mail server
<8> I wonder if you can add a hosts file entry as a quick fix
<10> ...maybe the relay only does relaying that's p***ed through their mail server?
<7> i dont know why
<7> when i telnet to mail.cytanet.com.cy and do all the thing with the helo and all this i can send a message anywhere i want
<8> without authentication?
<8> just configure your mta to use that server then
<7> how can i do it?
<8> it's sendmail right?
<7> yes
<7> sendmail works right
<8> yeah you can use it
<7> i can send inlan mails :)
<8> you have to make that m4 macro file and generate a new sendmail.cf with the proper info in it
<7> aaa yes i know
<8> I haven't done that in ages sorry
<7> so i will tell my sendmail.cf to use mai.cytanet.com.cy instad of mail-relay.cytanet.com.cy to send mail.Is that right?.
<8> sounds like it
<7> ok thx
<8> good luck
<10> Do type better than you're doing here, though :p
<10> ...sorry, couldn't resist
<8> yeah paranomos if they are using wildcard dns you may have just made a typo which is the cause of this whole thing
<8> you might be hitting the wrong server without knowing
<7> Yes i am in a harry thats why i am making many mistakes.sorry :)
<8> heh no problem
<10> Good times :)
<7> thx bye
<8> bye
<7> thx for the help btw :)
<11> *bling bling*
<10> eh, too bad I don't get paid til the 28th anyway :P
<12> really need to update the message i guess
<4> I think I or someone else posted a link earlier which was to a VW commercial... anyone have that around?
<12> not me
<13> ouchie :(
<12> buahahaha
<13> :D
<14> heya Gaia^
<15> hi
<12> hiya gaia
<15> red hi
<15> kick anyways
<15> the bot can always ask to relet in >G<
<15> :)
<15> ^5
<16> why thank you. But what I really need...is an updated desktop utility of some sort so I can install a new mozilla
<13> what distribution do you use?
<16> Mandrake 10.1
<16> and it didn't like the moz 1.7.12 rpm I tried
<13> ah, there is mandriva 2005 and mandriva 2006 already
<13> (the mandrake of today)
Return to
#linuxhelp
or
Go to some related
logs:
#teens
enron embezelment
haifa wahby
#squid
pageging
#mirc
phpeclipse view source
wine unimplemented function KERNEL32.dll
kollox bis suf
squid block pron
|
|