| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10
Comments:
<0> umask=0222
<1> yes, but every times takes sda1, sdb1,...
<1> Is removable disk
<0> ic
<0> must be a config file somewhere for that
<1> It is have to do with udev or fstab-sync?
<0> no idea
<1> Can I change something to not mounted automatic the usb disks, and to do manually?
<2> dxdemetriou: what distro are you using?
<1> Fedora core 4
<2> oh, i just saw.
<1> I have used Ubuntu before and it was ok, but I changed because it is difficult to work source packages
<3> hi, I need usbfs mounted, what do I need to enable in the kernel configuration to do that?
<4> I have problems installing a modem on suse 10
<4> Intel 536EP modem
<4> can someone help me ?
<5> NightLifer linmodems.org will tell you if it is supported
<4> suse detects my modem
<4> but I can't dial with KInternet
<4> I also tried with kppp
<3> i tried mount -t usbfs none /proc/bus/usb
<3> but it gives
<3> mount: none already mounted or /proc/bus/usb busy
<3> mount: according to mtab, usbfs is already mounted on /proc/bus/usb
<3> but there is nothing mounted beacause it cannot see my scanner
<5> Kadmon are you sure that your scanner is supported by linux? many are not
<3> yes, its in the list of snapscan
<3> and it worked fine with the 2.4 kernel
<3> i checked fstab to, no sign of usbfs mounting
<6> hello, i have a question, i have installed slackware 10.0 on my pc, when i go on runlevel 3 my keyboard and mouse are responding, but in runlevel 4 they are not, why is that?
<7> MartineliADy: the keyboard and mouse is connected via USB ?
<5> Kadmon if mtab says it is mounted then it is, the problem is elsewhere
<4> I can't find my modem
<4> on that list
<6> nope Marian, they are serial :)
<3> shields_ i tried adding the line to fstab to mount it at boot-up, it gives me a message that there is no /proc/usb
<5> Kadmon I don't use usb so I can't help much -- try web search for kernel 2.6 + usb scanner
<5> NightLifer you can buy a modem on ebay for a few dollars
<3> ok, is there a way to force the 2.6.15 kernel to use the deprecated scanner module?
<8> Kadmon: are you building the mod yourself?
<3> no, i want to copy it from an old kernel
<3> and add it to the current one
<8> Kadmon: it may work if its not a 2.4 kernel mod
<3> sadly it is a 2.4 kernel mod
<8> Kadmon: ouch, it may work but 2.6 handles things a lot different than the 2.4/2.2 kernels
<3> OptimusPrime, yes I know, had lots of problems with my scanner due to libusb
<8> Kadmon: 2.6 is a little faster, a lot more secure
<8> Kadmon: you can give it a shot, it may work but then again.. make sure you have either a backup kernel or an grub/aboot/lilo entry, that will allow you to swing back easily if something goes wrong
<3> OptimusPrime, I copied the old .config file of the 2.4 kernel to the 2.6.15, probably this is why i have some problems
<9> Hm.
<0> hm
<8> Kadmon: maybe... the older configs don't have all the options and the like the newer ones do.. often, the kernel will simply skip it if its not marked *=y
<3> well, did not want to compile it from the scratch, seems to me I have to do so
<9> I would've thought that after a certain bandwidth/pps, it wouldn't vary so wildly in just a few seconds...
<8> Kadmon: I've used older configs though, without a hitch
<8> Kadmon: but I would double check it after loading it into menuconfig
<3> OptimusPrime well everything works fine except the scanner, thats the main problem
<8> Kadmon: can you access the scanner as root?\
<3> no, it cant even detect it
<8> Kadmon: ouch...did you update modutils
<3> i have everything updated with swaret
<8> Kadmon: ok then
<5> Kadmon you may have missed something when you did the menuconfig for the 2.6
<8> Kadmon: have you, can you, try different kernel versions? I'm sporting an Alpha and it took some time before I found a 2.6 kern that worked good with my scsi drives
<3> shields_ I thought that also, but I dont know what
<3> i have the USB Device File System enable
<8> Kadmon: you can open the config file up... its just plain old text.. and then go through it making sure they're the same... you could also use 'diff' and 'more'
<3> hmm, they are the same
<8> Kadmon: I know older kernels were bad about that... they would drop settings or change them to 'module'
<3> yes, I got many changed to modules
<8> Kadmon: like I say, try different kernel versions...in some releases they fix things, others, they break'em...thats why I stuck with 2.6.13.4.. it works.. may not be the latest greatest,but it works for me just fine
<3> what about the 2.4 kernels?
<10> hi guys. i download kde 3.5 and i want to perform an upgrade from kde 3.4 to kde 3.5. the packages are in .rpm format
<10> how i do the upgrade ? it's my first try, so i need a little help. thanks
<8> Kadmon: you can try it but from what i undertand [gossip] binaries built under 2.6 don't function the same under 2.4 or older...but I don't know... I booted my original install cd, 2.4, and every appeared to work
<8> Kadmon: theres not real need to upgrade if your software is supported with an older kernel version
<3> but it's not as safe as 2.6 right?
<8> Kadmon: true, 2.6 has more saftey features built in to it
<3> OptimusPrime: well, im going to mess around with the kernel, maybe I find a 2.6 version that works
<5> Kadmon if I remember correctly 2.6 has support for usb scanners built into the kernel, it is alot different from 2.4 -- you may need to slog through all the options in make menuconfig and activate support for usb scanners
<3> shields_: they dropped it
<3> shields_: there is no support in 2.6.15
<8> Kadmon: probably too much of a h***le trying to keep up with all the new scanners rolling out
<3> I found that it's supported in 2.6.2, im going to try with that
<8> Kadmon: give it a shot and see how it works for ya
<8> Kadmon: the sub releases also make a diff.. 2.6.13.4 works fine for me, but 2.6.11.3 doesnt
<11> hiz
<11> need ***istance with a samba as pdc and winxp client logon problem
<11> anyone?
<12> taraxopios: it would be better if you'd tell the problem first.
<12> ndaxi ?
<11> samba works nice as a pdc but when i try to login with winxp after i have created an account seems like it cannot lovate the dpmain
<11> domain*
<11> locate
<11> signorseal reg has been edit fine in the client
<11> i work sith suse 9.3
<11> knowlegde for samba3 as pdc wanted
<11> :)))
<0> ha
<13> i wish him luck on his quest for knowledge.
<13> he'll need it
<0> he
<13> I have a replacement PSU that seems to be working great.
<13> yay
<0> good good
<14> Afternoon
<0> yes
<0> well
<13> then.
<15> hi themaxxiez, D.
<13> hi.
<15> Well, i **** when it comes to web design, i **** in general.
<15> :(
<15> D, shoot me
<15> Kde-look has some nice wallpapers,
<15> especially in the 1280x1024 section.
<15> Thanks buddy!
<16> :D
<16> anytime !
<13> i want a nice new seagate sata drive.
<13> but i dont want to payfor it
<17> steal it
<16> D-side turn in to a burglar and steal one
<18> can someone explain to me how i can get apt-get to install multiverse packages?
<19> kamran_, google for: +linux +ubuntu +sources.list
<18> thanks!
<16> weee .. splitoidz !
<20> i cant't to install sound of a SAA7133 tunner .. any help ?
<14> liviu25 should work with a 2.6 kernel according to google
<21> i need help
<22> just ask.
<21> AntX_x i want to kill an application, and it`s name is psybnc. how can i kill it
<21> ?
<22> first you gotta find the process pid. by issuing the following command: ps ax | grep psybnc
<20> ScoT: i install module but i have no sound
<22> and then you type kill -9 pid#
<22> for example, kill -9 12800
<21> AntX_x
<21> cand i pastre here ?
<21> paste
<14> liviu25 you added it to modules.conf ?
<20> yes
<22> mRcosmin`: www.pastebin.com
<14> apparently you need to scan each tuner
<14> liviu25 dont flood my query
<14> have a look there >> http://www.linuxquestions.org/questions/showthread.php?t=388203
<20> ScoT: i have problem with sound of tunner .. the module is ok
<22> Oh god, thanks for that rescue CD.
Return to
#linuxhelp
or
Go to some related
logs:
#php
#AllNiteCafe
#javascript
#linux
#squid
vbn v v #
#chatzone
#linux
#linux
#linux
|
|