| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11
Comments:
<0> Redr: It's complicated
<0> Redr: But it can be easy
<0> Redr: There's a single file /etc/modules or something like that
<0> Redr: Which is a bit like an rc.local
<0> Redr: Just a list of modules to blindly load in order
<1> thanks
<2> Slackware Linux 10.2. I'm trying to copy a file from a floppy. ls shows the file, but i cannot access it at all. Floppy was formatted by windows. I don't have a windows box with a working floppy to test it there.
<2> any ideas?
<1> argg can't find anything about the current aliases to first 2 nics
<2> wait, I should have su'd to root and tried. that worked fine.
<1> grr
<1> bbiab bit, network restructure :)
<3> everybody seen this already? http://www.freedesktop.org/~davidr/xgl-demo1.xvid.avi
<4> ewww. AVI. Hope it's not more than 2MB, or I'm wasting my time.
<3> its like 50mb... its an xvid video
<4> eek. More like 60MB
<3> its a demo of the new XGL stuff from Novell
<4> *sigh*. So it's of no use to me then.
<3> i thought UI like that was years away... the hardware has been there for years, but now it looks like the software is catching up
<4> (could be a right headache)
<4> No wonder stereo mfgs put most of it on one face.
<5> how do i format a hard drive, making a ntfs filesystem
<6> er you dont
<4> flush: use Windows if you REALLY want to make a NTFS filesystem.
<5> its cauz i need to format that hard drive usin ntfs filesystem cauz its not mine and it will have win**** installed on it later
<5> so i cant use ext3
<4> *sigh*
<6> hmm okay that does look rather nice
<0> Cube desktops were working years ago
<6> looks like the movie stuff caught up with common use :)
<0> I know a colleague was using one back in 2001
<6> now add some vr gloves and drop the mouse
<3> hmm.. ubuntu's site has gone down for maintenence... wonder if a Dapper announcement is comming
<6> hmm so what do I need if I wanted to use that? :)
<7> anyone got ubuntu here?
<0> Not a single person
<7> good one
<0> them: I want to know how well they work with two heads, each head a face of the cube
<6> why stop at 2
<6> we need 6
<6> :)
<6> today I'm using about 4 virtual desktops on average
<0> I'm not putting an LCD face-down on my desk
<0> I'm at 6 to 8 myself
<8> anyone here from sweden?
<0> Sca: Not right this minute, no
<0> But I believe we do have Swedish regulars
<0> You might even say we have a couple
<9> don't even get me started on Norton
<10> is it that bad these days>
<10> ?
<10> i havent used it much in 4 years or so
<10> always like the corporate edition then...
<10> no one else was as easy to control from one point back then
<11> i have pretty good question can nyone help
<11> ***''
<0> Gewp: When it breaks it give the user no clues
<0> Gewp: And outlook just says "Cannot contact server, call your mail service provider"
<0> Gewp: And when we get mail support calls, question two or three is usually "Do you have an anti-virus product like Norton AV on your desktop"
<12> "Because it probably blocking it, or trying to be clever."
<12> I hate it when AV tries to be clever. Because it never is.
<10> longword: lol...those were all par for the course back then anyway
<1> grrrrr
<0> Redr: Rain fade?
<1> no thats not the problem
<1> that 3rd nic, finally got the irq conflict problem solved but still dont work
<1> i can not get it to talk to the satellite modem
<13> Can someone point me to some resources for trying to rebuild an lvm.conf file that's been corrupted?
<1> i dont understand what the problem is
<1> let me flop some configs and see if the nic works on another subnet, brb
<1> longword i can't get the firewall to talk to sat modem :(
<1> i tested the cable and it works
<1> if i plug directly into my box it works
<6> hmm so ok which is faster, hyperdrive or warpdrive?
<1> ugg dont know wht the freakin issue is
<1> its not the nics got them all working
<6> arp cache?
<1> dont think so
<1> shows a different mac than any of the hardware on that box
<1> any more suggestions?
<1> when i ping it retrieves the mac okay
<0> Redr: The modem isn't locked to a particular MAC address is it?
<6> longword, so what do you think?
<0> Redr: Why does it have to be used on a different card?
<1> hmm
<1> okay this is the setup
<0> them: I'm going with hyperdrive
<0> them: It's mroe openended
<1> isdn goes into eth0, lan (10.0.0.x) goes into eth1, and eth2 was to go to the sat modem
<0> Sat is currently...
<1> currently all traffic routed to isdn for obvious reasons hehe
<1> sat is set at 192.168.0.1 and eth2 is set at 192.168.0.2
<0> Redr: So you've not had the satellite link working at all yet?
<1> if i go directly to nic in this box it works
<10> arg
<1> i can ping it i can surf net
<10> i hate waiting for stuff
<6> Redragon^, this nic having what ip?
<1> if i set my nic in this box to 192.168.0.2 and plug it directly into sat modem it works great
<1> hmm maybe arp cache on modem?
<6> Redragon^, sooo as I said arp cache
<1> though i've tried a full power cycle
<6> oh ok
<6> does the modem have a serial console?
<1> nope
<1> its not any sort of arp cause if i take my cable from pc2 and plug it directly into the modem it works
<1> hmm
<1> okay shutting down for 1 more test, bbiab
<14> hrm.
<14> So what options are available to me if I'd like to use a Linux box to do VLANing on a dumb switch?
<14> Ah, looks like I need a physical interface for each VLAN...
<6> ?
<14> Like a L3 switch
<6> not really
<1> okay whats that nic tool? miitool?
<6> mii-tool
<14> Redragon^, what do you know of VLANs in Linux, i.e. I want to make a box a L3 switch in conjunction with a dumb switch
<1> okay thats wierd
<14> wordup, mule.
<1> SIOCGMIIPHY on 'eth0' failed: Operation not supported
<1> eth1: negotiated 100baseTx-FD flow-control, link ok
<1> eth2: no link
<1> yet the cable tests out, i even swapped cables
<1> this makes no sense
<6> vlans dont really have anything to do with routing L3 switch
<1> i haven't done anything like that danq
<1> arggg
<1> brb
<14> Who said anything about routing?
<14> heh
<6> L3 switch means it can do routing
<6> so YOU did
<6> L3 being IP
<6> L2 being only ethernet
<14> I understand what they mean :)
<6> if you say so
<15> danq: word mate, how are things?
<14> I found an article, but thanks.
<14> Not too bad, mule - and yourself?
<15> ok thanks, just got in from a dark and evil night club
<14> heheh.
<15> ready for some code...
Return to
#linuxhelp
or
Go to some related
logs:
lookitsme 1 on 1 chat
htb +sfq +gentoo
fedora fix IP ssh dual boot
rmbv file mplayer
asm connect
#linuxhelp
#chatzone
#chatzone
migration vc6 to vc8 compilation errors
sticky keys xorg gentoo
|
|