| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12
Comments:
<0> ok in kde now
<1> how it is possible when i delete a mail from evolution to delete also from server
<2> Flounder_ >>> rpm -qlp /path/to/thing
<0> Done
<3> i like pie.
<0> What am I looking for?
<2> rpm -qlp /path/to/thing | grep -i fglrxconfig
<4> how i unzip an .dmg
<4> file?
<0> nothing
<2> rpm -qlp /path/to/thing | grep bin
<3> _SkotWu: google may help.
<3> !dmg
<5> Flounder_, its aticonfig like level` said
<0> ok
<3> c13: depends on what package are you installing.
<4> yes but faster i can be helped from here
<3> if you install from rpm it is fglrxconfig, but that doesn't work well.
<4> is just a command line please help me level_
<3> _SkotWu: not if we don't help you.
<6> hi
<5> level`, when i do aticonfig --initial it put's in 1600x1200 automaticly.
<0> Ok bin got me aticonfig, fgl_glxgears, fglrx_xgamma, fglrxinfo, and fireglcontrolpanel
<6> where can i find the minimal & reccomanded hardware requirements to run linux with Xwindow?
<3> c13: then edit /etc/X11/xorg.conf
<6> is PII @ 300MHz and 120MB RAM enough?
<3> in Section "Screen"
<0> That resolution a majority of monitors don't support as far as I know
<7> Greetings,
<3> !xorg
<8> from memory, xorg is see XFree86 only different
<7> how do you make RPM from delta ?
<3> optocus: www.x.org
<3> _SkotWu: a .dmg file is a macintosh file, what distro are you running?
<6> thanks
<7> how do you make RPM from delta ? Anyone knows ???
<3> _SkotWu: please don't message me, atleast without my permission.
<0> Ok done aticonfig
<0> Now scaling resolution down
<4> level_ i am on my linux box
<6> x.org not found...
<3> _SkotWu: well .dmg files are macintosh files. so you can't use them on linux.
<3> www.x.org optocus
<1> it is possible to set evolution when i delete a message in case to delete it or them also from the server
<1> ?
<0> I'm going to restart my system now brb
<5> Flounder_, what did you wrtie for the aticonfig
<7> oh damn it
<0> Oh nothing yet
<0> Are you supose to?
<3> andreas_kal: man rpm ?
<7> level, heh, okay.
<3> everybody, look, it's tux!!1
<5> Flounder_, huh?
<5> you diden't write any command line for aticonfig yet?
<0> All I typed into the shell was aticonfig --initial
<5> cool
<3> Flounder_: restart x now.
<3> Ctrl + Alt + Backspace should help.
<0> Alright going to see if this works brb
<7> i don't see anything about delta
<7> and man delta seems irrelevant
<3> optocus: www.x.org is currenty down, i don't know the reasons why.
<3> andreas_kal: i think delta.rpms are diff of binary files..
<7> level, the reason i'm asking is, cause my YaST couldn't update libgnomeprint and libgnomeprintui for some reason,
<7> so i took the deltas off of the FTP and trying to force update.
<7> weird, it's updating all the other packages except these two the online updating.
<3> andreas_kal: sorry, don't use suse.
<3> but that seems to be another problem, not because of delta files.
<7> of the ftp ? i tried other mirrors as well
<7> why o why fails to update these two and nothing else ?
<3> i don't know what error.
<7> it doesn't say
<3> and i don't want to think of it right now, i don't really like suse.
<7> heh
<7> me neither, reiserfsck it
<7> :)
<7> they're not high priority patches anyway.
<0> I had to restore my old configuration back again
<0> I was getting no signal to the monitor while in graphical mode
<3> that's what happened here too, you didn't follow all my steps i think.
<0> I think I'm going to give it a break for now been trying to figure this thing out for the past 4 hours
<9> anyone that can help ? /usr/bin/ld: cannot find -lsocket
<10> heya linuxers
<10> i updated proftpd on my server and now it's not accepting pam authentication
<10> it's centos 4.2
<3> gilesw: how did you updated proftpd ?
<3> by source ?
<10> rpm
<10> it was up2date actually
<3> uhm, can't find a reason here.
<3> maybe it replaced the configuration file or something.
<11> So compare the two configuration files.
<10> hmm i just totally removed it and added again
<10> so it's a vanilla config
<11> What does that have to do with anything?
<10> well there might have been an old configuration
<10> that wasn't compatible
<11> "Compatible" with what?
<10> weird that the default config still uses pamauth which the log messages flag up as depreciated
<10> presumably because it's default now
<11> What you're *actually* saying is that you have no idea how to configure it, right?
<10> eh
<10> i've used proftpd for 5 years
<10> so yea i do know what i'm doing
<11> But yet you'll randomly replace entire packages rather than comparing a configuration file.
<10> but if you don't want to help don't waste your time
<10> quicker
<12> what's a good port to triger in order to have a working dcc ?
<4> who can give me a root user?
<11> The port you want to use for the DCC, oddly enough.
<4> i need to compile something
<11> _SkotWu: You don't need to be root in order to use a compiler.
<12> mwilson, i don't know how to set this up behind NAT.
<11> whitewabbit: Obviously.
<12> That's why i ask, also i checked /etc/services to see the un***igned ones.
<11> whitewabbit: Hence your question, and my answer.
<12> mwilson, which one you would use ?
<2> whitewabbit: If the NAT box is running linux, then modprobe ip_conntrack_irc ?
<11> whitewabbit: Me? I wouldn't use any. I'm not a warezer.
<12> kittenbot what's that ?
<12> mwilson, why, dcc chat is warez ?
<12> or sending/receiving a picture from/at a friend is warez also ?
<11> whitewabbit: Usually.
<12> anyway, i won't follow such a discussion, i never gave you examples of warez to treat me like this.
<2> It's a netfilter kernel module that looks at irc traffic, and tried to determine whenever a dcc is about to happen...
<12> Thanks man.
<2> whitewabbit: It has to be on the NAT box itself though...
<2> Otherwise you're probably going to have to resort to starting a little web server -- webfsd, for example.
<13> you might require to make sure ip_nat_irc is also there
<12> mwilson, why you version me ?
<2> Yeah, what ScoT said too :)
<11> whitewabbit: Just verifying something to myself.
<12> mwilson, that you called me a warez creep ?
<14> mwilson: I have absolutely no doubt at all you'd complain if he versioned you
<14> mwilson: "double standards"
<12> steg, let him version, i'm clean, not like some others.
<11> steg: No, actually the only time I say anything is when someone thinks they're entitled to privmsg.
<12> each one knows who he/she is.
<3> whitewabbit: it's just mwilson, calm down :)
<12> dns mwilson
<11> whitewabbit: As for you, I didn't call you anything at all. I made a statement about what DCC is usually used for. You can put yourself in that box, or not.
<12> mwilson, okay.
<3> hahahahha
<11> How to "use" one? Put the disk in the drive and mount it.
<11> ack
<15> longword question for ya
<15> longword does hsphere have the ability to deal with chain certs for users adding certs to their site?
<16> Nothing built-in, no. Which is an irritation
<17> where can I get the plugin to watch *.wmv ?
Return to
#linuxhelp
or
Go to some related
logs:
#linux
#linuxhelp
c# clienttoscreen
#php
#linux
Sabryna Chase
pwla ma
wtmp findit
#java
#linux
|
|