| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8
Comments:
<0> 90M is still pretty much anecdotal; it's what the onboard nVidia NIC's little BIOS thing reports
<1> bronaugh: I had to install a fiber run in our Woodland, CA branch where they had a 475 10baseT run.
<1> 475 feet even.
<0> nice.
<0> specifications are meant to be violated!
<1> bronaugh: Oh yeah, apparently...
<0> the other thing I'm absolutely thrilled with is the 'forcedeth' driver.
<0> let's just say it's a steaming brown coil of code.
<0> I started out using that NIC, because it's onboard, etc.
<0> thing dies halfway through a TCP transfer, never comes back.
<0> so I threw in an old DEC Tulip we had kicking around.
<0> no problems since.
<2> heh
<2> whats wrong with 90M ?
<0> it's right at the edge of the spec.
<2> spec allows upto a 100m
<0> dude, knowing this building a fscking rat chewed on it.
<0> 90M + rodent = bad cable
<2> er, so would a 10M
<3> hi
<3> i have a dedicated server and i have problems with dns for a .de domain. can anyone help?
<0> yeah. but if you have 90M of cable, the chances of $RODENT chewing on it are 9x higher than 10m
<3> i have to ips as ns: 216.69.73.65 and 216.69.70.85
<3> can anyone really help?
<1> qerg: Yeah, what's up?
<3> i just explained my problem
<3> i have a dedicated server and i have problems with dns for a .de domain. can anyone help?
<3> i have to ips as ns: 216.69.73.65 and 216.69.70.85
<3> it wont work
<2> er, thats not a lot of an explanation
<3> well
<1> qerg: Sounds like you need to read up a bit more. There's no problem having multiple NS.
<3> i set this two ips (hosts actually) but it refuses to resolve my .de domain
<3> i read somewhere that for .de it is a bit more special
<1> One name server has to be a primary and one has to be a secondary and you need to up options to have the secondary update from the primary.
<3> do you know about .DE domains?
<1> qerg: Not true.
<1> DNS is DNS is DNS.
<2> so whats the domain name?
<3> concurs.de
<3> presently resolving with godaddy's parkct servers
<1> That domain does not point to those name servers.
<1> Oh. Gotcha.
<3> my godaddy control panel redirects them back to their servers
<3> my servers don;t work.. though they worked with other domains (no .de though)
<1> So, to make your Name Servers work, you'll need to change your primary and secondary name server to point to the new name servers. Then, set up a master domain on the primary and a slave on the secondary.
<3> my plesk did that already!
<3> problem is that not even concurs.de solves to my ip (i dont need reverse)
<1> Are your Name Server running right now?
<1> Nevermind, they don't appear to be.
<1> At least, I can't query them.
<3> well. the ips i posted here have 1 digit changed (for security reasons)
<1> What is a "plesk" anyhow?
<3> but my dns works for other 8 domains
<3> .com's and .net's
<3> they do not work with this .de i have
<1> qerg: Then your record or your domain definitions are wrong.
<3> they are not
<3> i did everything in the same way i did with the other 8
<3> i DID tell you that with a .de it is different
<1> qerg: There's no difference in .de and .com and .net as far as DNS cares. It has nothing to do with it being a .de domain.
<3> thought you could really help
<3> really?
<4> Yes qerg, really.
<3> check this out then:
<3> denic.de/en/domains/technik/nameserver-_und_nsentry-eintraege/NS-Eintraege.html
<3> you'll see it DOES have something to do with being a .de domain
<3> that is why i came here
<2> hmm their en site still looks a lot like german
<2> :)
<1> qerg: I'm reading nothing here that says anything about .de domains not being anything other than standard.
<2> well a.nic.de still points to packct servers
<3> wait
<3> it says: The first 3 bytes of the IP address (C-cl***) is different for each nameserver
<1> Where?
<4> the INETRNET DAMNIT try freshmeat.net, linuxapps.com and tucows.com and then winge at /dev/null
<0> LadyByte: you need to shut up.
<3> yeah, LadyByte, you ARE helpful
<3> godaddy replied to me that "The first 3 bytes of the IP address (C-cl***) must be different for each nameserver."
<3> c cl*** is : 216.69..83
<3> right?
<1> qerg: That doesn't make ANY sense.
<2> thats to avoid dolts running primary and secondary on the same ip with aliases
<2> er s/ip/machine/
<3> oh
<2> the whole deal is to HAVE a good redundancy
<3> define redundancy please
<2> physically seperated primary and secondary nameservers
<3> great...
<1> qerg: Backup support. If one server goes down, there is one to take it's place.
<3> then why should .com works and not a .de
<3> ?
<1> qerg: I still am not reading anything on the denic.de site that requires that.
<3> k
<0> ok, anyone know of a link checker that doesn't ****?
<3> godaddy "support" replied to me in an email about that
<0> I think last time I ended up writing my own...
<0> it crashed.
<0> it's bloody Python and it still managed to crash.
<5> can someone try to connect to my ssh server?
<5> i edited hosts.allow and i wanna see if it works
<6> how do i do a tracert in linux?
<3> one dumb question: which is the C cl*** in 123.201.200.191 ?
<1> traceroute.
<2> first 3 octets
<3> :)
<3> 123?
<2> thats is 1 octet
<2> 123.201.200 would be 'cl*** c'
<2> although you shouldnt no longer refer too it like that
<3> so which are the "first three bites" in 123.201.200 ?
<3> 123?
<2> a byte is 8 bits, can be any value between 0 and 255
<3> k
<3> so is it 123?
<2> that is 1 byte
<3> ...
<3> so in 216.69.73.65 and 216.69.70.85 the first three bites ARE different, right?
<2> afaik yes
<3> then ... i shall kill godaddy!!
<2> well
<2> SadAngel, englihs
<2> english even
<7> Ok
<2> riiiight
<7> ;-(
<8> guys I'm trying to get horde3 running on sarge. It seems like I'm missing imap.so for php.. how would install it on debian?
<8> nevermind, php4-imap should be the package.
<9> can someone help me to install phat linux
<10> hi
<11> hi
<10> i need some help .. can some one help me ... a romanian will be better :D
<10> i can understand :D
<11> i'm not too good a linux...
<11> just ask the question
<10> well
<10> do you know haw can i start a ftp session on my shell !?
<11> oups...nope
<9> can someone help me to install phat linux
<0> ok, second call: anyone know of a good tool to trawl a website looking for broken links (ie: a link checker)
<0> good meaning, doesn't croak and die when it sees 60000+ pages.
<12> :)
<12> bronaugh get someone who doesn't have anything good to do and put him to verify the links :)
<13> hello, how do I remove the grub minimal bash-like ??
<0> Juni: uhh. yeha.
<0> I'll do that. right around the time I start heating my home by burning money.
<12> that is also a good ideea
<12> :)
Return to
#linuxhelp
or
Go to some related
logs:
#linuxhelp
nicheclips.com
#linux
zitrax
#asm
#linux
pok3_m0n
ding dong avon calling .wav
gentoo 82915g dual
#MissKitten
|
|