| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Comments:
<0> Gaia^: i need to send you some snaps of my kids (yep two now, g and b, 5 and 3)
<1> monkeyboy maybe tomorrow , k?
<0> sure thing
<0> hope things start lookin up
<1> :) ta
<2> !@#!$
<2> i upgraded this stupid ubuntu system that i was doing this apache thing on
<2> which broke something my sister was using
<3> hehe
<2> so she rebooted and i guess it upgraded my kernel too
<2> which was patched with reiser4 support
<2> cuz / was on reiser4
<2> i think
<2> now i boot the ubuntu install cd... mount is saying hda* is an invalid argument
<2> there is no cfdisk or parted
<2> does it use fdisk for all partitioning stuff in setup or something else?
<2> does fdisk show the fs type on the partition like cfdisk
<2> ?
<2> i'm sure it can, but how? :P
<2> actually i don't think i used reiser4 on that box...
<2> bleh, all i know is i did apt-get update & apt-get upgrade
<2> and now when it's booting, i'm seeing all these errors regarding mount usage before and after the pre-mount script executes
<2> i can't tell why, all i can see is "mount: usage: mount ..." repeatedly
<3> i'm no help there
<2> i thought apt was supposed to ask before upgrading kernel or something... isn't that true?
<2> don't you have to explicitly tell it to upgrade the kernel?
<2> if that is the case, corrupted kernel/mods can be eliminated as a possibility...
<2> were there any major syntax changes in recent modutils releases?
<2> btw, i get the same errors when i try to mount the partitions manually, too
<2> it doesn't say wrong fstype or anything
<2> wtf
<2> this is a completely stupid mount implementation
<2> whatever it is
<2> -V doesn't work... --help only produces one line of output
<2> something like: mount [OPTIONS] node [MORE OPTIONS]
<2> ?!
<2> mount /dev/hda2 says: mount failed: invalid argument
<2> err... mount /dev/hda2 /mnt*
<2> bleh, whatever. i'll use another install cd to mount it
<4> tethereal -Vi eth0 port 5050 and host 192.168.1.22 -w /etc/yahoo I need some correction to make it fair. Can any one help
<2> make it fair?
<2> LadyByte 734/1024/400
<5> 0.001791992187
<2> err
<2> LadyByte 734*1024/400
<5> 1879.04
<2> LadyByte 1879/60/60
<5> 0.521944444444
<6> does anyone know how to share a printer with cups over the network
<6> I check the web interface, and no help there
<2> LadyByte 711124/1024
<5> 694.45703125
<7> are there any boot loaders for linux that can "boot last OS" by default instead of preset defaults ?
<8> your s/be you're :)
<7> how does that work ?
<7> guess i'm not that awake :(, now i know it wasn't me that was banned :)
<2> wtf did k3b get so retarded?
<2> i've run k3bsetup like five thousand times on this same account on the same computer, but it still is giving me problems about detecting devices and stuff
<2> i'm burning and cdrom groups, both devices are accessible from prompt
<2> s/i'm/i'm in
<2> i have two burners on this computer and k3b refuses to autodetect either one 90% of the time
<2> now i can't even add them manually with k3b setup
<2> why does god hate me?
<2> even when i save extra long to get name brand hardware and do research on it, i get evil anomalous problems that noone can help with :\
<7> they on the same IDE port ?, ... (primary/secondary, can't remember the proper name), honestly that's all i can think of
<2> yeah, both cdrom devices are on the same ide controller
<2> they both function fine if i try to mount them manually... i've burned cds with both of them before
<2> i think that everytime i upgrade k3b it causes a new problem or something, heh
<7> i remember having one cd copying tool, told me that having them seperated is better (so they're not slave/master for eachother
<2> yeah... it *can* be better
<2> depends on the hardware setup
<7> can't be worse can it ?
<2> yes :P
<2> master & slave on same cable share the same controller
<2> and the controller automatically accomodates for the slowest devices on the cable
<2> s/cable/controller
<2> so since my cdroms are slower, if i put them on the same cable as my harddrive, it will slow the harddrive down
<2> s/them/one of them
<7> ya, but it taxes the CPU or has some conflicts when trying to do a direct copy, ... was years ago i ran into that problem, now i ony have 1 dvd drive, so no problems
<2> since i only use one cdrom at a time usually, it's more efficient to keep them on seperate controllers
<2> yeah, i don't do any cd copying really :P
<7> k
<2> i imagine it would present a problem in that case maybe
<7> and your dealing with a program i've never heard of before :)
<2> you've never heard of k3b?
<2> well, anyway, as i said, i can read and access the cds fine, i just can't get k3b to stay configured properly
<7> write protect the settings file after you configure it right ???
<7> if it's not depending on a settings file to detect your drive, i would ***ume it's got a conflict, likely the hardware, but if it's detecting your drive 'some' of the time, could be program conflicts
<2> Flear: before i kept having to run k3bsetup and add it to burning group and make it update permissions every time i started it
<2> now that doesn't work either
<2> but whatever, i am using cdrdao manually now
<2> seems to be working
<7> at least something is working then :)
<2> in approx. 5-10 min i get to go boot the latest version of knoppix and try to figure out wtf went wrong with the apt-get upgrade on my sister's ubuntu box
<2> yay!
<2> hey, did you guys know you could enable frequency scaling on celeron d's?
<2> i don't know a lot about hardware really, but i didn't realize celerons were overclockable at all
<7> check to see if you can overclock or underclock only
<9> No actually, I haven't found out why my nose runs and my feet smell. Nor do I quite understand why you drive on a parkway and park on a driveway.
<7> LOL
<9> This statement is false. <-- no no, if it's false then this statement is true, while if it's true, then the statement truely is false!
<7> i liked the first funny better
<9> Axioms are always funny even though they aren't meant to be :)
<7> depends
<9> I'm trying to do homework after spending 2 hours at the gym and downing 2 shots of conadian whiskey and 7UP... you can imagine my overall state of mind...
<7> some paradoxes are brought up because the philosopher was an idiot who failed to think anything through, ... i've heard a few of those incompleat brainless 'questions' they come up with :(
<7> LOL
<9> while I like the gym, a good aerobic workout will make me somewhat brainless for the next several hours. Add to that a shot of R&R mind you I'm a heavy man, doesn't help matters. But I have to submit my quiz questions tonight by 11:59AM or I will lose 2 grades on it... so the trek continues
<10> !nightowl222 Bif_Naked_-_Moment_Of_Weakness.mpg
<7> while i commend the idiot who allowed a script to play mp3's from irc, i think they definitly lost out in the test of brains and features to have it load videos & movies as well, ... just exactly what are you watching on your computer ?
<7> anyway, back to the question that brought me here, anyone know of any bootloaders for linux that will boot to the last OS you picked by default after the time-out ?
<11> Flear: grub can do that with the save-default option
<11> err.. 'savedefault'
<7> sweet, now i just have to figure out how to use grub ... but regardless worth doing :)
<7> last time i played with trying to get it working i gave up :(
<11> http://www.faqs.org/docs/Linux-mini/Multiboot-with-GRUB.html
<7> thanks :)
<7> curiosity while i'm at it, can i configure grub to load a linux from a partition that isn't installed yet ?
<11> you just add it to the menu.lst file
<11> there's also good intel here, http://www.gnu.org/software/grub/grub.html
<7> bonus :)
<7> now i run into problems i am stuck on, why can't i change my lilo config settings, i can change the settings file, but lilo ignores this and goes on to load the origeonal setting :(
<11> you need to re-run lilo after changing the config file as far as I know
<7> :(
<7> k
<7> well next is putting in grub instead anyway :)
<12> yo
<12> supose i have a dvd reader
<12> and gmplayer with essentials codecs
<12> will i be able to play dvdz?
<12> or i need specific codecs or sumthin
<13> flush: you got all the libs?
<12> i have /usr/lib/codecs
<12> supose i get this
<12> http://www.mplayerhq.hu/MPlayer/releases/codecs/essential-20050412.tar.bz2
<12> would it be fine
<13> flush: i meant as in libdvdread, libdvdnav, libdvdcss, libdvbpsi...
<12> kodon: http://pastebin.com/634989
<12> is that okay
<13> should be
<14> :P
<14> !start
<5> from memory, start is what you have to press to stop in Windows
<3> hmm #ro-scripters is a script kiddie channel isn't it?
<15> Could anyone here help troubleshoot virtual users with proftpd?
<3> whats the prob ghost?
<15> i've setup the ftpd.p***wd and ftpd.group file, and i've included the path to the files in the config file
<15> but when I try to login with them it does not allow me
<3> did you check /var/log/messages for errors?
<15> i was just about to, I forgot to check it lastnight when I was working on it...
<15> does not seem to say anything
Return to
#linuxhelp
or
Go to some related
logs:
#linuxhelp
WHAT CITY WAS BESEIGED FOR 880 DAYS DURING WORLD WAR II ?
#windows
What number is at 6 o'clock on a dart board
Dont bogart that joint my friend path it over to me
#chatzone
#c++
#london
PIC18F USB mouse example
sami bag pula in el de net?
|
|