| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Comments:
<0> If I were you, I'd make a backup of all personal data - and then do a fresh install of some nice dist.
<1> too much data on server
<1> to resinstall all would take years :P
<1> and the downtime would be too long
<1> http://ftp.gnu.org/gnu/glibc/glibc-2.3.6.tar.gz
<1> there it is
<1> google is nice :P
<0> you really should use a mirror for that.
<0> If I download from ftp.gnu.org, I get 20 kb/s
<1> I did not find any
<0> If I download from a mirror, I get 1MB/s
<1> I get 555 k/s
<0> lucky you
<1> yep
<1> downloaded
<1> not so lucky when one cannot write ./configure as in old days :(
<1> configure: error: you must configure in a separate build directory <-- I dont even understand what they mean
<1> first time configure wont work out of the package :o
<2> mannbergen: why do you need to upgrade glibc?
<2> and are you upgrading everything else along with it?
<1> mysql refuse to install
<3> man: It's fairly clear you're not qualified to screw around with your installation's glibc
<1> do I get mysql version who dont need upgrade?
<0> if you replace glibc, then everything else will refuse to run.
<1> :(
<3> man: Try a different distribution, I'd recommend CentOS 4.3 which ships with MySQL 4.1 and will work just fine with MySQL 5
<2> wouldn't a statically linked version of mysql work?
<0> If he's using sources only - then why doesn't mysql work?
<1> maybe mysql 4.x wont require new glib?
<2> or what's wrong with slackwares mysql package?
<4> where i will get the yahoo mesengre for feodra core 4 ???
<2> slackware's*
<3> Chimi: Try gaim or jabber
<3> Chimi: AFAIK FC4 ships with gaim
<1> I try get older mysql version then :(
<0> Hmm.. this is not good
<0> /tmp/tmp>md5sum DRDFLASH.IMG
<0> 32d15bbf0810c2a2f86c53342b306cc5 DRDFLASH.IMG
<0> /tmp/tmp>md5sum DRDFLASH.IMG.readback
<0> 449edd16bce27ae6a18bc0df5e5bad63 DRDFLASH.IMG.readback
<3> Run: Very bad sign indeed.
<4> longword, the GAIM is already in fc4 .. but i want to Upgrade it
<3> Chimi: Well, you could upgrade to Fedora Core 5
<2> mannbergen: you can do either that or try one of the slacwkare-built packages. what version of slackware are you using now?
<3> Chimi: It ships with gaim 1.50
<3> 1.5.0 that is
<2> ftp://ftp.slackware.com/pub/slackware/slackware-current/slackware/ap/mysql-5.0.22-i486-1.tgz <-most recent version they provide
<4> hmmm ~ got it .!
<3> Or you could grab the .src.rpm from FC5 - or some other source - and use rpmbuild --rebuild to turn that into a .i386.rpm
<4> longword, wat is difference between Squid n Samba ?
<2> Chimi: they do completely different things
<1> ah. the static may not require glib
<1> http://dev.mysql.com/get/Downloads/MySQL-5.0/mysql-max-5.0.22-linux-i686.tar.gz/from/http://mysql.he.net/
<2> mannbergen: i said that like 10 min ago
<1> yep. but I ddin't knew that was available
<4> i heard abt the Squid it is Proxy .. but i dnt know abt Samba .. its also Proxy or wat ?
<2> Chimi: samba is for windows network filesystems and printing, squid is for http proxy/load distribution
<3> Chimi: Both Squid and Samba are equally good as dog biscuits.
<2> hah
<0> <1> ah. the static may not require glib <-- glibC
<1> ok. glibc
<1> takes some time to download :P
<1> this package is huge :o
<0> That's because it is static - the same amount you have to download extra now, will have to be loaded into RAM - extra.
<1> ok. I got enuff ram
<1> 41 MB!
<1> and that is gz format
<4> i have Multitech MT5600ZDX Data/Fax modem will it work on FC4 ? linux systems ?
<0> ok... lets upgrade my bios...
<0> be back in a month or so...
<5> ello
<4> i have Multitech MT5600ZDX Data/Fax modem will it work on FC4 ? linux systems ? its External Serial Modem
<6> first guess is yes
<4> ?????
<4> does it work ? with linux system ?
<6> typically an external serial modem is a hayes compatible modem
<6> and that would work with linux, i haven't seen on yet (not that it can't exist) that doesn't work
<3> Good ref I hve to say.
<6> longword you know of a serial modem that is a "win" modem?
<6> bbiab
<3> Redr: Rockwell did one once.
<3> Exceptionally uncommon though since by that time it was becoming more cost effective to build such devices as USB since you didn't have to ship a PSU, worry about the internationalization of that, and there was more headroom for chucking bits around
<3> AIUI the serial winmodems were of the HCF variety - again a dying breed
<7> hello its my first time using ubuntu, after i login i get the prompt user@network:~$
<7> what do i do to make it run?
<3> Make what run?
<7> ubuntu
<3> It is running.
<8> mikhael: What version of Ubuntu did you install?
<7> well i had an error with the gui, now it just shows the prompt after i log in
<8> mikhael: What was that error?
<7> 5.10
<7> ok i'll reboot to see the exact error again
<8> mikhael: And what type of video card are you using?
<7> Failed to start the X server (your graphical interface)
<7> It is likely it is not set up correctly
<8> mikhael: So what type of video card are you using?
<9> :)
<7> im using my notebook so i think its an onboard one
<7> i have no way of looking at the brand right now
<8> mikhael: At the prompt there after you login, type "lspci -v" and you'll see what it says
<7> ok
<7> the list of hardware came up
<8> So look for the video card
<10> 0-0
<7> the video card is up on the list, can't scroll upward :}
<8> mikhael: Hold down shift and hit page up
<7> ahh
<8> Or shift and the up arrow
<7> yeah i see it now
<7> it says
<7> well what do i look for?
<8> Just say the name of the video card
<7> capabilities <available only to root>
<7> ATI Technologies: unknown device 5955
<8> mikhael: For instance... 0000:01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 4000 AGP 8x] (rev c1) (prog-if 00 [VGA]
<7> (prog-if 00 [VGa]
<7> yah
<8> What comes before that...
<7> i'll type everything down
<7> ok
<8> What's the make and model of the notebook?
<7> 0000:01:105.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5955
<7> an HP pavilion
<8> HP pavilion what?
<7> ze2000
<7> does the capabilities <available only to root> have a thing to do with it?
<8> No
<7> k
<8> I'm checking to see what card it is exactly
<7> incompatible you think with mga graphics card
<7> ok
<7> thanks in advance reality :)
<8> Are you sure this isn't an HP Pavilion ZE2000Z?
<8> Turion processor?
<7> no its not ze2000z
<7> its a sempron one
<8> What's the processor?
<8> Yeah, that's a ZE2000Z
<7> yeah i've been to hps site before , it think that's the closest one
<8> The ZE2000 has intel onboard graphics... the ZE2000Z has ATI Radeon Xpress graphics
<11> hmm
<7> yeah
<8> But you're in luck seeing as I have the ATI Radeon Xpress 200m (same one you have) in my laptop running UBuntu.
<7> really
<8> Yep
<11> Think i'm gonna give ubuntu a go on my lappy soon. i just hope all the hardware is compatible.
<8> It is detected automatically with Ubuntu Dapper
Return to
#linuxhelp
or
Go to some related
logs:
srpit mirc
#php
#linux
#c++
atax bash.org
la croix d'austeran
#london
#linux
gguhf
#linuxhelp
|
|