| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
Comments:
<0> is this during install, or what?
<1> no after install. trying to get it to where i can login to root
<0> that's odd.
<0> sounds like the bootloader's misconfigured.
<0> lilo or grub.
<0> Kernel Panic: unable to mount root fs on :<some numbers here> ?
<1> niether this loads with it's on loader under windows
<1> yes let me post
<1> Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
<0> loader under windows?
<2> anyone here use psybnc ever?
<0> er
<0> Teakk:
<0> Bearcloud: that sounds completely nauseauting.
<0> and masochistic apparently.
<2> siglite: or any bnc server? (going to set up a bnc server on my www server, so I can have all 3 boxes on IRC, and not have clones (that way, no mater what box I am in front of, I have IRC if needed)
<2> I wanna know if it (psy) supports being connected to multiple servers at once
<3> ****. bnc.
<1> well from what I can tell it's not seeing the correct root dir it's needing to boot
<0> Bearcloud: that's correct.
<1> how do I find out the correct names to point it to in the config?
<0> Bearcloud: normally that's due to it being pointed to the wrong partition, or not having drivers for the drives/controllers or filesystem. But since it's some crappy windows based stuff, god knows.
<4> help /lib/libc.so.6: version `GLIBC_2.4' not found (required by /usr/li
<5> teakk so what kind of life do you live where you need your own WWW and mail servers?
<2> docfu: I do not NEED one, its nice to have one for ****s-n-giggles
<0> docfu: I run my own mail and www server. Not serverS though.
<4> where i'm search this lib?
<2> docfu: I had the extra boxen, so I just set each one up as a diff server
<1> siglite: ok that I understand , just trying to figure out what they are called to call them correctly to boot it
<0> NICKManei: what are you trying to compile?
<5> teakk how much is your electric bill a month?
<4> siglite: install amule
<4> peer to peer client
<4> siglite: slackware
<4> don't have apt
<4> siglite: you have this lib?
<2> docfu: about $40
<0> NICKManei: welcome to dependency hell. Have fun with that.
<2> tops
<2> usually about $ 33
<6> Question: I can connect to my web work's web server from my office, but when i try to connect from home it tells me that 'Connection closed by remote host'. Is there anyway to allow certain ip addresses to log into the server via ssh and how can i set that?
<4> siglite: here in brazil don't found
<4> siglite: do u know a source?
<0> NICKManei: I think you can get the latest glibc from gnu.org
<1> hmm ok on the console it tells me cannot find the /dev/cobd0 or linux root , unable to mount
<0> is that right?
<4> ok
<5> teakk considering you are running 4 machines thats not bad
<0> kernel.org should have a copy too.
<4> siglite: i'm seaching
<1> I've tried hda instead of cobd0... not sure what to point to tho......
<0> I haven't had to compile glibc for a good four years.
<4> siglite: o use kernel 2.4
<0> NICKManei: unrelated.
<4> siglite: can u see problem for this?
<0> NICKManei: speak english, "u" isn't a word. Go google for "download glibc"
<2> docfu: 4 machines, and 3 monitors, plus the TV's surround sound units, and I usually leave the coffee pot on all day on accident...so no, not bad at all
<0> NICKManei: you'll find about a bazillion sites to download it.
<4> siglite: sorry
<4> siglite: brasil use windows
<4> i a free
<4> gnu is not unix
<4> make this
<5> are you dense?
<0> wow
<0> NICKManei: you should go away now.
<5> siglite no no, let me
<5> i call dibs
<6> Question: I can connect to my web work's web server from my office, but when i try to connect from home it tells me that 'Connection closed by remote host'. Is there anyway to allow certain ip addresses to log into the server via ssh and how can i set that?
<0> icenyne: stop parroting.
<6> haha, sorry no one answered
<4> icenyne:
<4> icenyne: iptables
<4> make log for all conections
<4> icenyne: 22 port?
<6> where are the iptables?
<6> yeah 22
<5> NICKManai go into #linuxlatino or something
<7> I manually loaded and tested a new driver for my network card, have updated the new driver in /etc/modprobe.conf and placed the .ko file into the modules dir... But my system keeps wanted to use the old driver when it boots.. How would I go about changing this?
<2> can a TFT get 'burn marks' like a CRT can?
<4> docfu: ok
<8> Teakk, I doubt it
<8> Teakk, and colour CRTs are virtually not susceptible to burn-in
<9> Teakk: no.
<5> bobby10 copy over the old one? :)
<4> icenyne: u speak english and can't make this
<8> Teakk, that was primarily a problem with old monochrome monitors
<4> man
<2> okies, good
<9> Teakk: Plasma displays can
<4> icenyne: man iptables | grep log
<2> now I wont worry if I accidently leave my monitor on when i go to work
<0> bobby10: you'll need to remove the old one from /lib/modules/`uname -r`/drivers/net/ or wherever the hell it is in there.
<5> teakk/strider yes they can
<5> no i've seen burnin on LCD's
<7> docfu: just fully overwrite... k.. I just didn't wanna create any issues...
<8> which is funny, because screensavers are ubiquitous to the point where my DVD player has one, yet screens don't need saving any more ;)
<0> Liandrin: heh, yeah. It's obligatory eye candy these days.
<7> siglite: I renamed it so it couldn't find it before I fully deleted it just incase.. and it complains.. so I think Im going to try docfu's idea of just naming the new one same as old..
<0> I have the cool opengl screensaver with the all seeing eye rotating above a pyramid.
<0> being a wearer of tinfoil hats, I felt it appropriate.
<5> would that be the one on the twenty dollar bill? :)
<4> siglite: english it's a hard languege
<5> NICKManei its 26 letters to get right
<0> NICKManei: maybe you should find a channel that speaks portugese.
<5> try japanese/chinese/korean where you have 40,000
<5> #linuxbrazilliano
<7> exit
<7> wrong window... hehe
<4> docfu: it's easy
<7> k... gonna do a reboot test now... see what happens
<4> docfu: what disti our use?
<5> me? i don't
<4> districuition
<4> opa
<0> lol
<4> docfu: use windows?
<4> siglite: :D
<0> george bush has picked up linux!
<4> good
<5> siglite no just irc
<4> here im brasil all use windows
<0> because you KNOW that's how he'd say 'distribution'
<4> yeah
<1> ok how do volume id's work in linux and how do I put that in the root= command in the config file?
<4> congratulations
<5> siglite can you imagine GW giving support advice?
<5> "well, didja try updatin yer kernal?"
<4> how resize fhoto with gimp?
<10> g'night all
<5> night tsokolat
<11> "well first ya use lilly-o"
<0> Bearcloud: for ide drives, /dev/hdxn where x=a-z (ide device id) and n=1-255 or so, and is the partition number
<1> example colinux is on volume 3 of the only harddrive in the machine
<5> "Well didja read the channel faq? well why not?"
<0> Bearcloud: for scsi and sata it's /dev/sdxn
<4> docfu: u know use grep?
<1> this is a regular hardrive, not scsi raid or anything else
<4> need cut one linux for a txt and > for other txt
<0> Bearcloud: that would be /dev/hda3 ***uming that the drive is installed as a primary master and is IDE/ATA
<4> docfu: can u help-me?
<5> ok
<1> ok got a new error *PROGRESS*, now it says not a directory...
Return to
#linux
or
Go to some related
logs:
#php
nisa maltin sexy
SwissCenter gentoo
cmd1 | cmd2 cod c
site:www.quotesdb.info rotards
#chatzone
what is missing from a naval orange?
#MissKitten
#linuxhelp
#skype
|
|