| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9
Comments:
<0> and only keep the parts you want for your crazy ideas. http://www.google.com/search?hl=en&lr=&safe=off&q=inurl%3Ahttpd.conf&btnG=Search
<1> <3 google
<0> is that a depiction of a heart, or a rather inadequate set of male reproductive organs?
<1> it's an ice cream cone
<1> then a butt
<1> a butt coming out of an ice cream cone
<0> so, i don't think this is a 64-bit/32-bit issue, since my glxgears binary is 64-bit and the nwmain binary is 32-bit and i'm seeing terribler performance in both.
<0> under xorg-x11 and nvidia GL settings.
<1> is direct rendering working?
<1> glxinfo | grep rendering
<0> direct rendering: Yes
<2> glx vendor?
<1> hm!
<1> plot thickens!
<3> :)
<0> tried both kernel agpgart and nvidia's one. glx vendor is nvidia.
<2> dmesg | grep agp ?
<4> where does tripwire keep the config?
<0> zaei: nada, i had to remove agpgart from the kernel in order to give the nvidia one a try.
<0> since it would autoload even when compiled as a module and would not let me unload it.
<2> agpgart: Detected an Intel i875 Chipset.
<2> agpgart: AGP aperture is 128M @ 0xf0000000
<2> agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
<2> agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
<2> Blah blah.
<1> agpgart: sacrificing goat's blood in order to attain high framerates in nwn and glxgears
<1> o_O
<0> agpgart is evil in my mind only because it's a pain to remove
<0> every piece of info i've found on it suggests a) it's more stable than nvidia's and b) about as performant
<2> 59565 frames in 5.0 seconds = 11912.831 FPS
<2> You may begin crying =)
<1> it's possible that nvidia's drivers have trouble with 64bit?
<1> as they are closed-source and all that
<2> I've heard stuff like that.
<0> to the extent that they're on suspiciously on par with software?
<2> I wonder if you could apply css to gaim conversations.
<4> where do I find the files for tripwire?
<1> zaei: a lot of the chat programs for os x use webkit now
<1> so there's css themes, javascript, xml for chat windows
<1> kinda cool
<0> zaei: yes, i'm crying. what's your set up?
<2> FroggyFeet: 6800GT.
<2> lenox: I don't have OSX =(
<0> zaei: yes, I'm full out bawling now.
<1> well, i just mean
<1> the rest of the OSes will catch up
<1> except for maybe windows
<1> so...you'll see it soon!
<2> =>
<3> =)
<2> It seems a no brainer.
<0> sure, javascript for chat windows. that's intelligent.
<0> that way someone can clicking on the text inthe interest of 'protecting their copyright'
<1> that's not all javascript is for
<2> javascript is separate from html =>
<0> s/can/can disable/
<1> the only use for javascript that i have seen in chat windows is for fade/scroll effects
<1> and it can be disabled
<2> They should embed squirrel into web pages :D
<0> s/can be/should be
<2> Ooh, the smooth scrolling in gaim2beta2 is nifty.
<1> i tried one theme with javascript once
<1> immediately went back to another
<1> i don't feel the need for fade ins
<1> ok, monkey island time
<0> i'm gonna disappear and try the "nv" xorg driverand verify that this perf is 100% unreasonable
<5> I don't like gaim...
<5> but it's better than ymessenger
<1> gaim is ***y
<1> my bro uses it on windows
<5> on the icq network it have lots of bug
<6> in lilo.conf I use: image /boot/kernel (symlink to my current kernel), and root = /dev/sdb4 .... on boot, windows works but gentoo won't boot, says its no the good root, and it is.
<5> it dosen't respect the privacy setting...
<6> why could I get VFS root error can't mount root, if the setting is correct ?
<5> missing sata support in the kernel
<6> oh
<6> maybe ..!? :)
<6> true SATA is unset
<6> Serial ATA Support is set to Module, with make menuconfig
<6> under scsi low level drivers ?
<6> in block devices theres only promise, got nvidia nforce2 chipset
<0> yeah, so that didn't get me anywhere. glxgears went down to 370 fps with the nv module and eselect opengl set xorg-x11, nwn wouldn't run. agpgart isntead of nvidia's agp driver, 700fps in glxgears, i get 630.
<0> fps in nwn under agpgart seems to be about the same. either way, way below what it was 3 years ago with my geforce2 gts and agp 2x
<2> cat /proc/driver/nvidia/agp/*
<0> fast writes supported, sba supported, agp 8x 4x,. enabled, nvidia, 8x, fast writes disabled, sba enabled.
<2> Same here.
<0> brinign back the fast writes fo the heck of it
<0> fast writes enabled, sba enabled, no real change. it's clear the nvidia driver is doing something, since i now get a few more frames in glxgears [50], but the fps result is virtually identical in nwn.
<0> i'm gonna try an OLDER nvidia driver and see if it's just some stupid new thing they're doing
<0> tried nvidia 7878's, no discernable difference.
<5> have you tried ~x86 drivers?
<0> you mean, am i going to install a 32-bit gentoo installation?
<0> no, i'm not going to do that.
<0> apparantly, 50-60 fps with all the bells and whistles is norm for this card in nwn.
<0> so i know something is borked.
<7> how do I change my default media player from kaffeine to mplayer?
<0> context?
<0> you talking like kde, a browsers, what?
<7> sorry, KDE
<0> [chirp, chirp]
<2> asdaslkjdfsdf
<2> Wow, the connection came back =o
<0> hooray for t c p
<8> yep
<2> I like UDP.
<2> Yeah, I accidently put my laptop into standby...
<5> bad zaei
<2> Usually that makes tis USB wireless thing not work again until I reboot, but it came back this time.
<2> Stoofoo...
<2> The standby button is right next to the turn-off-screen button.
<5> float i = 1; char* j = (char * )&i;
<5> such a simple solution for a hard problem :)
<5> good night
<2> Uber-cast.
<2> What are you trying to do there?
<7> is there any way to give users read acess to an NTFS filesystem that I mount on /mnt/external
<7> when I try to chmod 777 , it gives me errors since its read only
<9> ntfs doesn't follow nix permissions anyway, afaik
<7> right
<9> poke over the user/users/gid/uid options, its covered in mounts man page
<9> just add'em to the fstab
<7> but the problem is, when it gets mounted, it get mounted by default as r-x------
<7> add what to the fstab?
<7> the users?
<9> user/users/guid/uid are options you can append in /etc/fstab
<7> oh, ok
<7> ill check the manpage, thanks
<9> that way users can mount/unmount it, or you can set specific uid/gid when mounted
<10> hmm, after emergin xorg x11 i got an error saying that the nvidia driver conflict with the nvidiafb... nvidiafb = framebuffer ?
<7> will changes to fstab automatically take place next time I mount the fs?
<10> i did compile the framebuffer
<9> cyclic: should
<7> hmm
<7> i have this:
<7> /dev/sda1 /mnt/external ntfs users,noatime,ro 0 0
<7> and when I try to mount from a normal user, I get an "only root can do that" message
<10> so i need to compile again without the framebuffer ?
<10> or can i just "turn off" the framebuffer ?
<9> FatMom: appears so, although it doesn't make much sense... but I don't have an nvidia card, so what do I know :-)
<9> hrm, that should work fine cyclic
<9> hmmm, I know it worked before for me... and now I get the same, must be root
<7> heh
<7> well, I'm glad I'm not alone
<9> same with user, wtf
<9> /dev/hdb2 /mnt/hdb2 vfat auto,rw,user,uid=1000,gid=100 $
<9> still works
<9> uid=1000,gid=100 that is
<9> might try that
<7> why the $ in the last field?
<7> what is uid 100 and gid 100?
Return to
#gentoo
or
Go to some related
logs:
#php
#linux
tifel pufta
repel prank button
fishing with rex hunt
#linuxhelp
#chatzone
zejra
What does an autophobe avoid referring to ?
#AllNiteCafe
|
|