| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81
Comments:
<0> you're going to wear him out ;)
<1> ubotu how old are you?
<2> I think you lost me on that one, n00b
<3> then Ubuntu seems to be ignoring KDE's --> 'System Stetting' --> 'Sound & Multimedia'c and the kmix applet
<4> ubotu told you n00b = "Do NOT play with me in any channel."
<2> Bugger all, i dunno, Toma-
<1> Toma-, i never knew that
<4> n00b, read what it said.
<5> mcdenyer, you can't edit it directly you see as you need root priviledges - so when copying you can copy with 'sudo' (to allow you root priviledges when copying)
<3> Toma-, is there any way to enable them both (perhaps by using separate drives, SDL or aRTs)?
<1> ohhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
<6> n00b, read about fifteen lines up
<4> quacker, you need 2 speaker systems
<7> what is the best minimal system specs for hdinstall ubuntu 5.10?
<8> hello
<9> coring, are you the one needing alsaconf
<9> coring, ??
<3> I have two speaker systems -- also I tested both sets of outputs and no sound came out of either
<10> how do I ACCEPT_KEYWORDS="~x86" in ubuntu?
<0> Cyorxamp: please keep it appropriate
<4> Angel_Dex, ive got it running on a 266 pentium 2 with 128mb of ram
<6> liberion, wasnt me :)
<7> Toma- 400mhz 320 ram
<5> tritium, it's a bot! - robot - servicing - gah whats wrong with that :P
<3> I was wanting to use one card for telephony, and audio input, and the other strictly for multimedia playback
<11> Hey everyone
<5> gathers up the wet oily nuts bolts and knobs of ubotu
<3> Toma-, ?
<8> How do I get ubuntu running on a PIII with 450Mhz and 256mb?
<5> Toma-, like I care :P
<7> jaza steals his 50mhz more p3
<3> jaza, pop the install CD or DVD in and boot to it
<4> quacker, im not sure how that would work
<9> quacker, your the one needing alsaconfig??
<8> no it won't work
<8> I tried it 3 times
<11> I've just installed Limewire, went through all the steps (http://easylinux.info/wiki/Ubuntu#How_to_install_P2P_Gnutella_Client_.28LimeWire.29) refreshed my GNOME panel and when trying to run Limewire, nothing happens. I use Ubuntu 5.10
<3> liberion -- not quite (alsaconfig is not used by ubuntu)
<5> liberion, hey.... might you know where alsa saves its info on what volumes things are set at ?
<9> quacker, you can make it work http://ubuntuforums.org/showthread.php?t=118445
<6> GenneX, do you have JRE installed?
<3> I'm goign to disable the c-media chipset in the BIOS and reboot. But as I tested BOTH SETS of outputs, I don't expect this to work.
<9> Cyorxamp, is there a file /etc/asound??
<8> I burned a DVD a cd-rw and a cd-r all at 1x speed and nothing
<11> coring: it doesn't seem so, let me see if I can find and install it
<5> liberion, nope!
<9> Cyorxamp, alsactl store save (saves sound volume)
<9> Cyorxamp, alsactl store (saves sound volume)
<5> liberion, hmm - where is it storing it currently tho ?:
<3> cat /proc/asound/*
<0> Cyorxamp: read the manpage for alsactl, and you'll find out
<9> Cyorxamp, well in slack based it stores them in /etc/asound
<3> amixer allows command-line control of the mixer for the ALSA soundcard driver. amixer supports multi
<3> ple soundcards.
<5> tritium, you I would listen to when calling the talking clock
<5> liberion, righto well I have found the directory in /proc
<0> Cyorxamp: ?
<5> liberion, I fear I have mucked up my volume controls you see - after a 'default' file if such a thing exists
<8> anyone have any idea on how to make ubuntu work on a 450mhz pc with 256mb ram?
<4> jaza, install it.
<6> jaza, define 'work'..installation..running..what
<9> Cyorxamp, use any mixer to set them right then as root use alsactl store
<5> liberion, Oh i can change the settings ok - just not sure what they should be set to (or what they were set to)
<8> it won't install either, run on the pc?
<3> Toma-, s/he's been told several times -- apparently s/he doesn't like that suggestion
<0> Cyorxamp: I already told you where the file location can be found.
<3> reboot'in now
<3> init 6... weeeeeeeee....
<9> Cyorxamp, to whatever you like
<5> tritium, hey look it's a duck in that corner
<6> jaza, wont install...so does the CD not boot into the install prompt or do you not have it set to read the CD and not the HD?
<5> quak
<11> coring: jre -> installing J2SE runtime would be the correct one?
<6> GenneX: what version does it say?
<7> where can i find like all ubuntu app and stuff icons in one big ole folder instead of searching thru the icon folder?
<5> liberion, you see I got a Creative Live 5.1 player - I was trying to find which bits are which speaker - but I dunno if I mucked it up
<12> so how does ubuntu connect to the internet?
<6> Angel_Dex: most icons are in their own folders...gotta just kinda look?
<5> liberion, Ideally I am after something like 'AudioHQ' on windows - where I can send something to each speaker to test them and set what 'speaker mode' (i.e. is using 5.1 or 2 say)
<8> I have it set on cd but I get an error code " iso linux: disk error 01, ax=425A,9F"
<9> Cyorxamp, then as reg user you can use alsamixer then as root store values
<11> coring: using Ubuntu how on easylinux.info
<0> Cyorxamp: no need to be a smart***
<6> jaza, reburn you're iso
<6> *your
<7> coring i looked and i want one big ole folder with no subfolders
<5> tritium, Ducks!? are you crazy?
<8> how do you reboot an iso?
<6> GenneX: yeah, i believe that's right
<6> jaza, reburn
<11> coring: but the links says 28JRE.29
<6> jaza, not reboot
<0> Cyorxamp: you're making little sense
<13> hello. i'm trying to get framebuffer to work in a higher resolution. currently vgafb is loaded, and i've also loaded nvidiafb. fbset is not changing modes though. should i rmmod vgafb or will that cause me grief since i'm probably using it right now?
<9> hello linuxgirl
<11> coring: can't I just use synaptic ?
<8> well see a tried that several times, on a cd-r, cd-rw, and dvd at 1x speed and still no luck
<14> hiii
<6> GenneX: eh...pretty much any J2SE runtime should work. you might try synaptic
<6> GenneX: yes :)
<7> barn yard dance >.>
<5> Ah!
<6> jaza, when does it give you that error? do you see the ubuntu splash/prompt off the CD?
<11> coring: j2re1.4 is what I have on synaptic
<11> that the right one?
<8> I don't get a boot prompt it frezes at the error
<6> GenneX: that should do awesome
<15> please i need help
<8> as it tries to boot
<7> coring >.> what programs you use for audio and video?
<15> can i ask a question ?
<6> GenneX: you might try going to the Limewire directory and running Limewire from terminal
<0> kuchiki: you don't need permission :)
<6> GenneX: it might tell you what version it wants
<15> thanks tritium:)
<11> /usr/bin/.... right?
<15> well im trying to install the last nvidia drivers
<15> but i have an error in installation
<6> Angel_Dex: i use Rythymbox for audio, and usually Totem for video...i dont watch many videos :)
<7> Cyorxamp XD!!! sorry
<0> kuchiki: you're using ubuntu packages?
<15> nope
<6> GenneX: i'm not sure..just a sec
<15> im trying to install the new driver 8178
<0> kuchiki: not using ubuntu packages can be a big PITA
<15> :(
<15> but its the official nvidia drivers
<7> coring i like mplayer and Gxine and Xmms but mplayers is to buggy and gxine has badres
<15> it must work
<15> its just me
<0> kuchiki: so are the ubuntu packages
<15> im a crap
<0> !tell kuchiki about nvidia
<6> GenneX: try /opt/Limewire
<16> !tell Pi about iso
<8> coring any ideas as to why is not working on the pc?
Return to
#ubuntu
or
Go to some related
logs:
instaling apache2 on ubuntu
gentoo MK_QTDIR
howto opendchub
emerge libfaad
#math
#web
#gentoo
#perl
promise ex8350+suse+driver
#oe
|
|