| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68
Comments:
<0> firestarter uses iptables right ?
<1> rama3i: intel gigabit ethernet
<2> movieman its probably /dev/dvd for him
<3> ponijs, you can try in terminal "lspci | grep video" < - - one way
<4> ye
<5> didn't try that. I just followed instructions to setup xgl
<6> kmischa: yup u'r right. where i can found the module?
<7> NoUse: do you think that was right? do i have to do the same thing for cd's?
<4> thats what i have it set to NoUse
<5> then I went to failsafe mode when it crashed, and ever since it stopped loading .Xsession
<8> D1: hrm, ok, maybe that's not a good idea. i don't know xgl
<2> movieman but if you have two drives
<2> movieman one is cdrom, one is dvd
<4> NoUse can i set mine to enable 2 drives ?
<8> D1: asked in #ubuntu-xgl ?
<6> kmischa: it can't be recognize on standard instalation module
<5> I'll try that thanks.
<3> id dapper still set for june 1 release?
<4> i have dvd both
<3> is*
<4> 1 rom 1 RW
<2> movieman well, mine is cd and dvd and one is /dev/cdrom and one is /dev/dvd
<9> guys, quick question: if you want to dual boot XP and ubuntu, is there any reason not to install grub in the MBR?
<10> checking for C++ compiler default output file name... configure: error: C++ compiler cannot create executables
<10> how can i fix that?
<2> !tell mike-e about b-e
<9> a friend is worried XP will break somehow if grub is installed in the MBR. works fine for me, so is there any basis for his fear?
<2> iNiku no
<6> one more question... does anybody heard about eepro1000? i need this module but i can't found it anywhere. my NIC need it to work
<11> how can I find out wether ATI Technologies Inc 3D Rage II+ 215GTB [Mach64 GTB] (rev 9a)
<11> supports 1024x768?
<3> iNiku, I cannot give you reason you may not want to but i find it easier to install on floppy and use it to boot into ubuntu...i just find it easier
<2> iNiku you can always put it back with a windows cd ayway
<12> green_earz: can u tell me in detail abt this modconf i dint get u i want the drives to be mounted automatically when i boot my sys
<10> i must be the only one that feels it's ridiculous not to have a fully functioning c compiler installed with base os.
<1> rama3i: it is called e1000
<6> ponijs: go to ati.com
<9> NoUse: that's what I thought and that's how it's always been with earlier windows versions
<9> NoUse: for some reason he thought XP is different in that respect
<9> navarone: that's not really an option
<11> I am damn annoyed
<2> iNiku its not
<3> iNiku, ...no floppy drive
<13> iNiku : if it failes use the install cd and press r (repair) and type fixmbr
<2> navarone it makes it take longer to boot too
<4> cool
<14> there are more ppl here than ubuntu xgl, so I think I will ask you guys: can I set opengl to add anaglyph/stereoscopics to programs that are made for plain 2d windows like ppracer and the screensavers?
<6> kmischa: but it still can't recognize my NIC? what's happen? I'm working on Intel PRO/1000 PL
<15> ponijs, grep -i default /var/log/Xorg.0.log has some info about your cards supported video modes
<3> NoUse, I guess I am not in that big a hurry...lol
<16> mike-e, the average user does not need a compiler. getting it installed however is very easy for those that need it.
<2> ponijs you know that the binary ati drivers don't support cards as old as that right/
<11> no
<2> ponijs it was written on the wiki page
<17> tony007: sorry i thought you said driver. modconf is for install modules, ie. driver. to mount a drive you will need to partions it and the edit the /etc/fstab file to add that drive
<18> mike-e, sudo apt-get install build-essential
<19> Has anybody successfuly setup a Samsung ML-2010 in Ubunutu?
<6> ponijs: it's supported. just go to ati.com and download ATI driver. then use fglrx instead ati driver on xserver setup
<9> navarone: no reason not to use some boot manager... you can boot linux using the windows boot manager too, if you're worried about using ubuntu for some reason
<4> NoUse i cant load nothing to do with system menu no updates no synaptic update manager nothing :(
<2> rama3i no, its not
<11> I installed the ati driver but it doesn't work
<16> gteppel, ML-1210 here. they have a decent set of linux drivers...
<2> rama3i its a Mach64 card, those drivers go from radeon 8500 and up
<3> iNiku, I have used ubuntu for almost a year booting with floppy...it suits my needs
<6> nouse: then vesa is the last answer
<6> :D
<19> Kr0ntab: did you run into any trouble?, I ran their setup utility but I'm getting errors when I try to print a test page
<2> ponijs run 'sudo dpkg-reconfigure xserver-org' and select ati as your driver again
<6> kmischa: but it still can't recognize my NIC? what's happen? I'm working on Intel PRO/1000 PL
<1> rama3i: check if the Intel driver supports you card, have a look at: http://downloadfinder.intel.com/scripts-df/support_intel.asp
<1> rama3i: The Intel support is great
<2> movieman try sudo apt-get update && sudo apt-get upgrade
<9> navarone: okay, whatever floats your boot :D
<9> NoUse: thanks for confirming my thoughts
<12> green_earz: wat to write in fstab file
<20> hi can you tell me where to download PHP5 binaries for ubuntu
<2> !info php5
<21> my add/remove programs has disappaerad
<22> php5: (server-side, HTML-embedded scripting language (meta-package)), section web, is optional. Version: 5.0.5-2ubuntu1 (breezy), Packaged size: 1 kB, Installed size: 20 kB
<2> ajith54 synaptic
<23> Hi. I have the fallowing problem. After a fild install of mldonkey-server on dapper I am blocked now, whenever I want to use apt-get dpkg and aptitude. Three programm first want to run dpkg --configure mldonkey-server... which fails ;) What can I do now?
<21> how do I get it back?
<3> iNiku, with other users wanting to use windows...users whoa re not very savvy...it is easier to remove the boot manager from the equation and just use floppy when i want to use ubuntu...<s>
<24> abumortwo
<6> kmischa: except this one. i have build intel newest driver. but it still can recognize.... new hardware new problem. :(
<7> NoUse: before i save any changes to hdparm.conf i have two questions: 1. everything line before it begins with #, should i add that at the beginning of the lines that i add too? 2. if /dev/dvd worked to set DMA in the terminal i would use that in hdparm.conf instead of the dev/hdc right?
<25> hello
<26> hi
<1> rama3i: do you use the vanilla kernel tree? or the ubuntu?
<2> brandon_ 1) no # comments stuff out 2) yes, use /dev/dvd
<27> Any ati users here
<28> hello?
<28> anyone there?
<2> ahmad over 750 of use
<2> ahmad us*
<29> is there a good guide for how to use grub somewhere? I tried it when I first installed Hoary, but it didn't work, so I used lilo instead. Can I switch back now?
<14> yup
<26> is it possible to upgrade (keep all my current stuff) to flight 7 from the CD? I know it's possible with the update manager (whatever that is, I found it in the wiki), but can I do it from the CD?
<2> !grub
<22> http://wiki.ubuntu.com/GrubHowto or https://wiki.ubuntu.com/RecoveringUbuntuAfterInstallingWindows or troubleshooting grub: http://www.gnu.org/software/grub/manual/grub.html#Troubleshooting
<25> I am searching an howto make package for ubuntu ?
<2> kasutaja not from the live CD
<7> NoUse: okay thanks
<2> kasutaja you can from the live cd
<30> My wallpaper and icons don't show up..
<2> kasutaja you can from the install CD*
<20> NoUse, which repository to look for PHP5 packages
<29> isn't there just a single live+install CD now?
<29> ajith54: php5 is in main
<26> the same question as dooglus
<2> ajith54 its the the main breezy repo
<31> Hi, is there a network monitor service/daemon similar to knemo available in gnome?
<2> dooglus for dapper, but the live cd doesn't work as a package repo
<10> how can i install libncurses?
<29> NoUse: I guess he's talking about dapper isn't he?
<32> Ok.. Lets see.. how can I explain my problem...
<29> NoUse: he said 'flight 7'
<33> hi
<2> mike-e search for it in synaptic
<25> do you know where can I find an howto make package ?
<34> any idea where in https://launchpad.net/distros/ubuntu/+bugs/ i can see all the bugs reported against the "parted" package? i couldn't find it even under "Advanced"
<2> dooglus yeah I know
<26> yeah I meant dapper drake flight 7
<10> NoUse: i searched with apt-cache and nothing came up
<10> except for some ruby mods.
<35> heya, i got this odd problem. I try to apt-get install mysql-server after a ubuntu-server install and i get dependency problems. perl and libdbi-perl and mysql-client 4 or something.. i'm using breezy badger 5.10... i normally use debian..
<32> Summed up pretty easily, I went to load Wolfenstein: Enemy Territory... and it like opened up, and then closed.. and in the terminal.. gave me an error..about Open_GL...which I ***ume is the driver, but I have the latest driver for my card, which took me forever to get...but I got it...
<1> choichoi: https://wiki.ubuntu.com/DeveloperResources
<36> is there a firewall installed by default ? i can not ssh to my computer
<37> hiya guys, any UK people here? any UK people using plusnet here? any uk people using plusnet who are as p*ssed off with them as I am and can recommend anything better? :-) they used to be great, but a 4GB monthly allowance during peak time (the only time i'm home), is ridiculous
<21> iv'e wrote sudo apt-get install lynx
<8> !info libncurses5
<22> libncurses5: (Shared libraries for terminal handling), section base, is required. Version: 5.4-9ubuntu4 (breezy), Packaged size: 281 kB, Installed size: 528 kB
<21> how do I open it?
<6> kmischa: ubuntu
<6> kmischa: ubuntu why?
<2> !info libncurses5
<38> Can anyone tell me how to write to a magicgate protected memory stick?
<29> khaled: there's a firewall built into the kernel, but all ports are left open by default. you'll need to install an ssh server if you want to run one
<39> !xinerama
<22> from memory, xinerama is https://wiki.ubuntu.com/?action=fullsearch&context=180&value=xinerama&titlesearch=Titles Hopefully, one of these works for you, and feedback is welcome
<32> And what it does basically, when I launch it, it goes black like it's going into the game, and then crashes, and makes my screen 800x600 but yet, I can move the mouse to the left and it takes the screen to the left to view the rest of it.. if I move to the right, it takes the screen to view the rest of the screen... it's almost like my viewing is at 800x600 but yet the screen itself is at 1280x????
<40> Jelte: i recently switched to UKOnline, .99/month for 1mbit uncapped
<32> Then I do the 3 finger salute and kill xserver, and start over again.. seeing as that is the only way out that I've found.
<40> been perfect so far
<25> thx kmischa !
<37> scifi: , hmm i like the sound of uncapped...
<25> there is too much people here !
<29> too many, choichoi
<1> rama3i: maybe you should try the driver of the vanila kernel tree => 2.6.16.16
Return to
#ubuntu
or
Go to some related
logs:
#php
#oe
Unixwhore 2.6
Compaq Computer Corporation FibreChannel HBA Tachyon
#perl
#ati
/usr/bin/python: error while loading shared libraries: libstdc++.so.5: cannot op
#php
#php
centos 4.4
|
|