| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68
Comments:
<0> http://paste.ubuntu-nl.org/13935 is resolv.conf. Only that last line may be a clue...
<1> how do i set up a loopback interface?
<2> dabaR: your nameservers are wrong.
<3> hi
<4> How do i know/change wich modules are loaded in my kernel ?
<5> voraistos, lsmod
<6> anyone had problems connecting with rdesktop? I only get blank screen for a few seconds and then the programs closes
<4> thx
<0> Jowi: that is when I am connected to the router, so it looks fine here...
<0> + it works
<2> dabaR: log into your router and see which nameservers are in use in there and put those in your resolv.conf
<5> voraistos, remove with rmmod, modprobe to instert (removal doesn't always work)
<7> Recommendations for a wireless card to install into a desktop computer for good compatibility? (Potential dual-booter)
<0> Jowi: sure, I will try that. The thing is that I can not ping out at all. Not even to IP addresses with the modem. That means no DNS resolving will fix it, but I am willingh to try. I will be back.
<8> snowfaked, any errors in the console when running rdesktop?
<9> can anyone help me with installing limewire?
<5> !limewire
<10> first you need !java, then download the http://www.limewire.com/LimeWireSoftOther and unpack it. Then just run the runLime.sh file. Voila. Consider !frostwire as an alternative.
<2> dabaR: when connected to the router, you will use the nameservers the router has got from the modem. if you are not using the router, you will not be able to connect to 192.168.0.1
<9> thank you
<6> Kr0ntab: nope
<9> !frostwire
<10> frostwire is, like, totally, a free peer-to-peer application that runs on the Gnutella network. See https://wiki.ubuntu.com/FrostWireHowTo
<9> is frostwire better than limewire?
<11> delmar, ... I have packages java-common java-gcj-compat
<8> snowfaked, I believe rdesktop also does not support microsoft's high encryption setting. check out the terminal services option to make sure it's using medium encryption or lower
<5> h3h_timo, feels faster here
<0> Jowi: that is clear.
<2> dabaR: (of course, it could be that the cable-modem has that address but it is more likely that the modem has got your public ip address registered instead)
<0> brb
<9> okay thanks.. do you need java for that?
<6> Kr0ntab: ok, have to check that
<5> h3h_timo, yes
<11> delmar, those are ubuntu packages.
<8> yup... what OS you connecting to? win2k3? win2k? xp?
<9> thank you
<5> !java
<10> To install Java/Sun Java see Java on https://wiki.ubuntu.com/RestrictedFormats and also see !javadebs
<11> del-mar, join #az-pain =)
<12> anyone feel like helping a nub? lol
<13> Evening all
<1> how do i set up a loopback interface?
<13> I'm trying to get hibernate/sleep/suspend or whatever to work on a Toshiba Satellite SP10
<5> gnosticapex, we live for the easy(!) questions :)
<13> Do I have a hope in hell?
<11> or delmar, join #az-pain
<14> robertj, what versions?
<1> !loopback
<10> sudo mount -o loop -t iso9660 foo.iso mountpoint/
<8> acid-trip, add "iface lo inet loopback" and "auto lo" to /etc/network/interfaces
<8> shoudl already have it
<8> unless it was removed
<12> heh well, I have a toshiba Satellite L25-S1195, it has an ATi card in it. I know that they made that flgrx or whatever for it and also ATI released drivers, I've got the ATi driver on my USB device, but I dont know the command to access it/run it >.>
<5> !ati
<10> ati is probably https://wiki.ubuntu.com/BinaryDriverHowto/ATI or http://www.ubuntuforums.org/showthread.php?t=24557&page=1&pp=10 or http://ubuntuforums.org/showthread.php?p=423589
<1> Kr0ntab, it's already there
<1> but when i try to connect to my ircd locally
<1> it wont work
<1> screw it
<15> !mp3
<10> it has been said that mp3 is a non-free format. To enable mp3 capability, read https://wiki.ubuntu.com/RestrictedFormats
<5> gnosticapex, that !tati factoid above has the ati info
<5> ericvw, !ata gnomefreak
<8> type ifconfig... do you see an "lo" device?
<4> nickrud: all i know is i should add module evdev to be loaded with my linux kernel. i dunno what to do (with modprobe, or where the module is/is not, etc....) :'(
<4> can u help ?
<12> Ill look at the community post, I already looked at the binaryhowto and it gave me the basic information but Im still having some troubles -.-
<12> if I could figure out how to access my USB device and run off of it, then I have the ati driver there >.>
<16> nickrud, again it says that u have to run apt-get update to fix these problem
<5> voraistos, you should already have it: lsmod | grep evdev , it should say it's there
<8> snowfaked, did that work?
<5> astriskmanish, did you replace the original, useless /etc/apt/sources.list with the one from http://paste.ubuntu-nl.org/972 ?
<17> tonyyarusso: I've not had much problem with any of the m***-marketed 802.11g wireless cards, once I've gotten them set up with ndiswrapper. There is something to be said about using a card with good linux support, though. Atheros-chipset based cards seem to have the best support.
<4> nickrud: with lsmod i dont see it. sorry i an complete noob. no idea what i should do
<9> okay, i installed frostwire.. but i already had java installed, but it says that i dont
<6> Kr0ntab: i don't have access to that windows machine yet so i don't know. will try that when i can first access it with windows
<5> voraistos, sudo modprobe evdev
<7> Managu: Okay.
<12> there a command thatll list off your kernel version?
<8> :-)
<18> gnosticapex: uname -a
<5> h3h_timo, how'd you install java?
<7> Is there a GUI tool for metric-English unit conversion?
<19> hi. my ubuntu 5.10 server have problems with outgoing connections. all connections in to it (when I connect to ssh etc) works fine, but when I use apt-get or ping or anything else that use outgoing network, it won't work. any ideas why?
<18> gnosticapex: uname -r just for the kernel release
<9> ummm... let me remember
<8> snowfaked, what version of windows is it running?
<9> umm.. i downloaded it and converted it to a deb package.. and then installed it like that.. it was from the unoffical ubuntu howto i think
<4> nickrud: oops, no with your comand i found it. i am noob and i have bad eyes lol
<5> h3h_timo, then try sudo update-alternatives --config java , that should be the final step
<9> thanks
<9> you know u guys are genius's?
<16> nickrud, yes i have replaced...
<5> astriskmanish, to make sure, type the following in a terminal: cat /etc/apt/sources.list , are they the same as the wiki?
<9> i am still getting the error though
<6> Kr0ntab: xp
<5> h3h_timo, what does java -version say?
<9> just a sec
<9> java version "1.4.2"
<9> gij (GNU libgcj) version 4.0.2 20050808 (prerelease) (Ubuntu 4.0.1-4ubuntu9)
<9> Copyright (C) 2005 Free Software Foundation, Inc.
<9> This is free software; see the source for copying conditions. There is NO
<9> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
<9> brad@ubuntu:~/Desktop$
<5> h3h_timo, you didn't choose the right java, then. Look for the one that says sun (should be 3rd)
<9> i have no third
<12> hmm, where can i get fglrx for ubuntu, linux kernel 2.6.12-9-686 >.>
<0> Hi again. The DNS entries get set properly by ifup. http://paste.ubuntu-nl.org/13936 is what I get when I ping by IP address.
<20> i think my firefox download has hung...
<13> Hmm.
<13> It'll seem to put it to sleep - pulsing power light - but not wake up.
<21> exit
<22> How can I check which version of Ubuntu I'm running?
<23> dudes
<24> tedd_: lsb_release -r
<23> i added some repositories
<22> perfect
<25> hmm... I'm having a problem with the Ubuntu LiveCDs, both Dapper and Breezy, on my new desktop. Bit of a graphical glitch.
<22> thanks crimsun
<26> tedd, or cat /etc/issue
<17> dabaR: probably a dead end, but is ping still setuid root on your machine?
<25> the X server starts, and the mouse works fine, as does the sound... but then when GDM/Gnome tries to start up, I just get this messed up graphic in the center of my screen
<27> anyone can help me with a ax550 vga card?
<25> and then nothing loads
<0> Managu: I ping fine when I am connected through the router.
<23> and now when i run "apt-get upate" i get a 404 error on some of he packages
<25> anyone have any ideas?
<28> Hello everyone !
<20> does anyone know why it says "you do not have the right permissions to extract archives in the folder "/opt""?
<5> h3h_timo, apt-cache policy sun-jre1.5 , that should show installed if you did the steps right
<16> nickrud, yes both r same
<28> needlez are you prefixing your commands with 'sudo'
<23> needlez: sudo and then the command
<0> needlez: cause you are not the owner of the folder.
<9> k
<5> astriskmanish, then sudo apt-get update
<17> dabaR: perhaps post the results of "ifconfig" when you connect directly?
<20> wait, should i be doing all this from terminal?
<5> astriskmanish, then sudo apt-get install kubuntu-desktop
<29> please, use aptitude instead of apt-get
<28> samuli, do you see any particular difference for your choice? how do they affect in general?
<16> ok.. i m updating it then will go for kubuntu-desktop
<23> i am getting 404 errors on some of my apt-get stuff when i run "sudo apt-get update" what do i need to do?
<29> harisund, with aptitude you can just as easily remove the whole thing if you don't like it.
<28> samuli: ah yes you make a good point there..
<28> samuli, no -- switches eh?
<0> ttp://paste.ubuntu-nl.org/13938 there is ifconfig, Managu
<29> with apt-get you end up just removing the meta-package 'kubuntu-desktop' which is really nothing.
<23> anyone, please?
<29> no switches or options needed.
Return to
#ubuntu
or
Go to some related
logs:
export DEBUG fglrxinfo
#sql
#math
php.info exploit
gimp replace colors
ip.blacklist.zap
#css
rug-zmd suse
install-gocr ubuntu
#nvidia
|
|