| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81
Comments:
<0> ill try that hold on
<1> anyway, i'm having an issue, where I can record from my mic, but sound doesn't p*** through, i have an HDA Intel chipset
<0> scheuri, doesnt exist either :(
<2> Gambit--: depends on the package (how it was installed)
<1> torrentwoes: which driver are you using in your xorg.conf?
<2> Gambit--: sudo apt-get remove --purge packagename
<3> how i reset my gnome configuration? just remove .gnome? or remove .gnome2 and .gnome2_private too??
<4> Zaggynl: "ls /etc/init.d/ | grep inet"
<2> Gambit--: or sudo dpkg -r packagename
<5> guys! Hi all of you! I have a problem printing from a ubuntu pc to another. I followed what is said in http://krazypenguin.net/Ubuntu_Dapper_Drake_6.06_Guide#How_to_print_on_remote_Ubuntu_machine_from_another_Ubuntu_machine , but on the server side I get a cups error: "E [14/Jun/2006:08:44:35 -0400] Unable to bind socket for address 10.152.58.9:631 - Cannot ***ign requested address." . Any hint? thank you!
<1> I would like to be able to plug my xm into my mic jack and listen with the headphones, but the mic input doesn't play back
<4> Zaggynl: should tell you if anything similar is there
<6> Zaggynl: okay...last ressort...try a "sudo aptitude search inetd" and check if there is a i at the approprite package
<7> gnomefreak, I'm looking at completely removing any of the X11 related packages, trying to get it to a clean condition.
<8> nvidia
<9> shane_, did you check to see if it was muted?
<6> gnomefreak: what about purge?
<8> should i be using generic or amd64-k8?
<0> scheuri, it gives a v before inetd
<2> scheuri: dpkg doesnt have a purge parameter i dont think
<6> gnomefreak: dpkg doesnt, but apt-get and aptitude
<1> JaZy84: well, the default mixer is kind of vague.there is a capture volume that's up, 2 capture mux volume which is up, and seems to control the recording volume
<2> Gambit--: removing xserver-xorg should remove all other X packages with it
<1> but when I run alsamixergui
<9> ah
<2> scheuri: i gave him the --purge command
<0> traveller, nothing like it :(
<1> that mixer doesn't let me raise the volume up
<6> Zaggynl: well, try to install it again "sudo aptitude install inetd"
<0> okay
<10> how can i chck the filesystem of my own root???
<1> in alsamixergui i'm talking about the "Input source" setting
<4> Zaggynl: maybe it's not installed, try -- dpkg -l xinetd
<11> is dapper out yet?
<4> Zaggynl: or you can follow scheuri's suggestion :)
<7> gnomefreak, so everything that depends on xserver-xorg will get cleaned out too, right?
<4> Intangir: yes
<2> interferon: yes for 2 weeks
<1> i'm not sure what "Inpu Source" is suppose to mean, versus Capture, and the 2 Captur MUX controls
<12> when i want to use mail notification with pop3, i can't select ssl (it's greyed out), despite this pop3-account works in evolution with ssl.
<11> how do i upgrade to it?
<12> is this a know issue?
<6> !tell interferon about upgrade
<2> Gambit--: should i might use aptitude remove purge to be sure im not sure how aptitude handles a purge parameter though you might want tto refer to man aptitude to find out
<7> gnomefreak, how is aptitude different then apt-get? I thought they were the same :)
<2> Gambit--: aptitude handles depends better than apt-get
<13> what is vmware used for
<14> gnomefreak: apt-get does a better job of resolving dependencies than aptitude
<15> dooglus: :p
<0> patrick_king, virtual machines
<12> someone using pop3 here?
<2> Gambit--: apt-get will suggest packages for you aptitude will install them automaticly
<6> patrick_king: to emulate other operating systems (and applications in it)
<14> ighost: did you try asking in #mysql or some such?
<0> patrick_king, http://en.wikipedia.org/wiki/VMware
<16> what package do I need to play mpeg,avi and other videos?
<17> gambit--: aptitude with no action opens a curses-based interface.
<0> works perfectly for school projects ;)
<18> gnomefreak: you can turn that off though
<2> Kibou: yes i know
<17> uberriffic: tell yanis about restricted
<17> ubotu: tell yanis about restricted
<2> Kibou: you have a config file you can do anything ;)
<7> Oh, that's interesting, I'll have to give it a try.
<17> uberriffic: sorry about the mis-nicking.
<18> just saying
<11> just change breezy to dapper in my sources.list and then run apt-get dist-upgrade?
<19> interferon: first apt-get update
<4> interferon: apt-get update && apt-get dist-upgrade
<15> dooglus: i'm talking in #postgresql right now, and they are giving me the bad news
<6> interferon: well, a "aptitude update" first
<17> interferon: I would recomend using the source-o-matic to generate that sources.list
<20> i'm on ubuntu live: how can i give cups a p***word for setting up a printer (i didn't succeed in configuring the network printer through the printers tool)
<2> interferon: with an apt-get update before apt-get dist-upgrade but yes
<12> additionaly, everytime i start evolution i get asked to accept a ssl certificate of the pop3-server. but the fingerprint is everytime the same
<11> right, i just did the update, but neglected to mention it )
<11> :)
<2> BlueEagle: not during upgrade
<12> how can i stop evolution behaving that way?
<11> 1272 upgraded, 250 new
<11> shoot
<13> so what could i use vmware for
<17> a_l_e: If you're on http://localhost:631 you need to specify a root p***word. To set the root p***word: `sudo p***wd` (not recomended) What happended with gnome-cups-manager?
<6> patrick_king: testing, working, developing...
<1> so no one has used an HDA Intel chipset?
<17> gnomefreak: oh, ok.
<21> I'm using dapper alternate CD but after a while I get black screen.. it seems its working
<21> but why that blank screen?
<17> patrick_king: You can use vmware for running other operating systems in viritual machines (the vm stands for viritual machine iirc)
<22> damned flashplayer download is taking _forever_
<16> nothing lasts forever
<17> gypsymauro: that might be the screen saver. Try pressing ie. shift.
<21> BlueEagle: screen saver on textual installer?
<17> gypsymauro: Yes, text interfaces are as much prone to burn-in on the monitor as any other interface.
<20> BlueEagle: no idea, i give the ip address but i can't it can't get to the printer :-( mac osx on the other laptop can.
<23> Something is seriously wrong with Dapper. I'm trying to install it on a new laptop and I swear it's taken 1 hour to go past the *first* step. You know, where you select the language.
<24> how i reset my gnome aparence??
<17> a_l_e: ...and your printer is a? ...and it's connected to a?
<6> DanielC: which CD? have you checked CD checksum?
<21> btw is not the screen saver and I got the same problem on another machine so isn't video card too
<25> hi someone please help me with a weird problem here :P im following this guide to get my wifi on my thinkpad working: http://www.ubuntuforums.org/showthread.php?t=26623 But for some reason there isnt any folder called /hotplug/ when i use this cmd sudo cp ipw-2.3-*.fw /usr/lib/hotplug/firmware/
<17> danielc: How much RAM on the machine?
<23> scheuri: Desktop CD. Yes, I checked the checksum, it was fine.
<26> jpbotelho: System->Preferences->Theme and pick Human, that should reset most things
<17> danielc: Make, model, speed and age of the CD-ROM drive?
<23> BlueEagle: Brand new machine, perhaps 1GB of RAM. 'top' doesn't show any problems with etiher CPU or RAM.
<23> BlueEagle:age: about 20min.
<17> danielc: then I recomend you choose the "check CD for errors" during boot.
<23> BlueEagle: Ok, seriously, this laptop is a new model and arrived this morning.
<24> Ng, i need remove all.. icons, bars.. i try remove .gnome, but it dont make changes..
<27> Hi all, I'm not able to view videos using totem, xine
<27> I can see the seek bar scrolling, etc. but the players show a blank screen
<23> BlueEagle: I *did*. I just said that. There are no errors.
<6> DanielC: well, there may be some hardware issues as well as problems with the CD-Rom...
<26> jpbotelho: ah. well you could remove .gconf after you log out, then log back in, but that will wipe quite a lot of gnome application settings
<23> But I swear that moving the mouse across the screen takes 10min.
<25> vikas, tried this http://ubuntuguide.org/wiki/Dapper#How_to_install_Multimedia_Codecs ?
<20> BlueEagle: it's a brother lj (hl1430). if i enable the "detect network printers" the system finds it. but it can't print to it. i start to think that i should download the ppi for it.
<27> I installed mplayer from multiverse and tried this "mplayer -vo x11 <videofile>" and then i can see the video
<6> DanielC: have you an OS running on the machine already?
<23> scheuri: That's what I figure. :(
<17> danielc: Well, it being a laptop might explain it. There are some problems with certain laptops. Try starting it without support for pcmcia. That has caused several installers to start working iirc.
<28> DanielC atr least your mouse moves
<23> scheuri: It came with Windows XP,which works.
<28> mine doesnt
<27> decon: i installed the codecs, like i said, if i say mplayer -vo x11 it works
<29> Can someone point me towards instructions on installing ndiswrapper?
<20> BlueEagle: its connected through usb to an ethernet print server
<6> DanielC: tried some CDs with XP? they work?
<23> BlueEagle: How would I do that?
<27> decon: i think Xv doesnt work.. which is the default video out
<25> vikas, weird
<17> !boot
<30> BlueEagle: Not a clue. Try searching at http://ubuntu.cc.com.au/
<17> !bootoptions
<30> https://wiki.ubuntu.com/BootOptions not the full complement of boot options but it is some of them
<23> scheuri: I haven't tried that.
<25> im no expert just thought that it could be the problem :)
<17> ubotu: tell danielc about bootoptions
<13> BlueEagle: so can it be run from ubuntu
<6> DanielC: BlueEagle might be right...maybe you need to add bootoptions before starting from CD...
<27> decon: this happened after i installed some packages following the RestrictedFormats topic in the wiki
<17> patrick_king: vmware has got a linux version. I ***ume it would be able to be installed on an ubuntu distro. Haven't tried it myself tho. Btw. if you don't know what you want vmware for, why do you want it?
<31> jimmy89: well, I seem to have made it here alive *grin*
<25> vikas, tried to uninstall them again :P?
<27> decon: :-) yeah
<25> no go ?
<32> Does anyone have some tricks for getting a USB Hub to work? It is detected according to dmesg as a 7 port hub... which is correct. But nothing I connect to it is found
<23> scheuri: What options would you recommend?
<27> nope
Return to
#ubuntu
or
Go to some related
logs:
Forwarded connection refused by server
OBEYSESS_DISPLAY
ubuntu framebuffer fb0 no such device
(\_ElSanto_/)
parity sync windows
#perl
search files in ubuntu
curl unable to set private key file
yum install ipw2100 no match
AES_ENCRYPT utf
|
|