| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66
Comments:
<0> frogzoo will i haveto use that command everytime now that i reboot?
<1> frogzoo, there are about three google results for my NIC.
<2> Ivaldi, do you have the emu1ok1 driver loaded?
<1> and two of them are people complaining that madwifi doesn't support it
<3> Ralith, madwifi?
<4> rewt_: no - just if it screws up, but see ubutu's pm about installing esd - makes life SO much easier
<5> tiede, the thing is, it doesn't even show up in the multimedia systems selector. Although it does show up in the device manager and in lspci.
<4> now really have to go, later folks
<1> rikai, as that comes with ubuntu, presumably if it were working I wouldn't be here.
<0> installing esd?
<0> thatsa command?
<2> take a look at this page: https://wiki.ubuntu.com/HardwareSupportComponentsSoundCards . Maybe it can help you, Ivaldi.
<0> there anyway to use something other than alsa?
<5> Thanks tiede, I'll check it out
<1> rikai, any ideas?
<1> rikai, ndiswrapper shows the driver as loaded and hardware present
<1> rikai, and lsmod shows the kernel module
<1> rikai, I just can't find the interface :P
<6> anyone have ati drivers working under dapper flight3?
<2> Now, onto me!!! My wireless card is not working. Anyone got a Broadcom Wireless card working on Dapper. It was working fine on breezy through ndiswrapper, but the bcm43xx driver which is supposed to make it work on Dapper cannot seem to turn it on.
<3> Ralith, https://wiki.ubuntu.com/WirelessTroubleshootingGuide?highlight=%28wireless%29
<6> Ralith, tiede did you configure your cards through network-admin
<3> err
<1> whoops.
<3> Ralith, https://wiki.ubuntu.com/WirelessTroubleshootingGuide
<1> michaelfavia, there is no interface to configure!
<1> rikai, thanks, looking
<6> did alias it then?
<3> Ralith, also: <6> Ralith, tiede did you configure your cards through network-admin
<2> yup. I activated it, but when the activation pop-up appears, it just stays there and nothing happens. (The light switch on the front of my laptop does not blink)
<7> is there a way to chown the files in dirs?
<1> michaelfavia, what?
<7> all at once
<1> batman, chown -R user dir
<8> hrmmph totem is telling me it can't handle avis
<8> is that normal for a fresh ubuntu install?
<2> It shows up under the name eth1, but Breezy had it as wlan0 (I guess ndiswrapper put wlan0...)
<9> !tell nny about restrictedformats
<1> michaelfavia, what do you mean by "did alias it then?"?
<2> click on the lifesaver Icon on your desktop anto9us, and you will find more on it there.
<7> Ralith: thanks, now... i want to have my hdd mounted to a certain folder...
<10> do you guys recommend some mysql client GUI on ubuntu?
<1> batman, er, what do you mean?
<8> thanks anto9us
<6> Ralith, does iwconfig/ifconfig show it?
<8> btw, i am using XGL and compiz right now.. so wicked awesome it hurts
<1> michaelfavia, no, as I keep saying, there is no new visible interface.
<1> just loopback, eth0, and ipv6-over-v4
<11> what's the best webcam to buy?
<7> Ralith, ok i have a hdd partitioned etc.. and i have to go to the disk utility every time i reboot to remount to the folder is there a way i can have it do it and stay?
<6> Ralith, make one: iface wlan0 inet dhcp
<6> in your interfaces file
<9> tiede, you mistyped me then?
<12> Hi all!
<1> michaelfavia, bash: iface: command not found
<6> if you know the kernel module is loaded. (lsmod)
<1> :P
<1> and I do.
<1> oh
<1> I see
<1> missed the second bit.
<1> interfaces file?
<6> there you go.
<12> Do you know if there's a tool for Windows that'll burn an Audio CD from .ogg files (the ones you create in Ubuntu)?
<2> yeah, sorry, I read you wrong anto9us
<6> /etc/networking/interfaces...
<1> batman, add a line to fstab
<1> michaelfavia, thanks, I'm a bit unfamilliar with ubuntu
<9> tiede, np :)
<13> hello can you help me how to uninstall wine in my system, what commands?
<14> hello all
<13> hello angel_dex
<2> sudo apt-get remove --purge wine, lora_
<7> Ralith, fstab???
<1> michaelfavia, right, added, now what do I have to restart to get it to see it.
<13> thanks...
<1> batman, /etc/fstab
<6> Ralith, me too just installed flight 3 today.. but it is pretty vanilla linux module loading.
<14> would i need to do anything if i change my vidcard such as configuring somthing ?
<3> !fstab
<15> the /etc/fstab file lists all drives and partitions but can be easily configured automatically with the diskmounter file found here http://www.ubuntulinux.nl/files/diskmounter See <partitions>.
<6> anyone have ati driver support in dapper?
<3> !tell batman about fstab
<1> michaelfavia, so what do I have to do to get the changes made to that file applied to the system?
<3> michaelfavia, uhh, just install fglrx in the same way you did for breezy?
<16> qui est la
<3> !tell michaelfavia about fglrx
<17> anyone know how to setup firestarter to allow vnc connections?
<16> on comprends pas votre langue
<16> !!!!!
<15> Did you get hit by a windmill? Try searching at http://ubuntu.cc.com.au/, squeaka2
<3> odat, alllow port 5800 and port 5900
<9> !fr
<15> Va a #ubuntu-fr ou #kubuntu-fr pour aide et discussion en francais
<17> rikai, k thanx
<16> slt tes qui
<3> !fr
<3> lol
<1> !es
<15> Hispanohablantes: Por favor usen #ubuntu-es, #kubuntu-es o #edubuntu-es, alli obtendran mas ayuda.
<14> anyone?
<16> vous etes de cette ecole
<2> I blacklisted the bcm43xx module in modprobe.d/blacklist and loaded my windows drivers through ndiswrapper 1.8, strangely it is not working. Is there a difference from 1.7 to 1.8 relevant to Broadcom cards in ndiswrapper that makes it not work properly?
<1> michaelfavia, you there?
<16> vous etes de quelle ecole
<7> Ralith, thanks && do you know of the gl library file for php the name of the file?
<17> rikai, 5800 to 5900 or seperate?
<1> I hate it when people dissapear right before my problem's fixed.
<5> tiede, it didn't help me too much unfortunately, since ubuntu won't even detect the card.
<1> batman, php has a gl library? heh.
<16> name
<7> Ralith, for graphics yes :P
<2> squeaka2, arrete de parler francais, veux-tu, ce channel est en anglais.
<16> a dsl
<1> batman, thought that was a purely CGI language.
<3> somehow i'm tinking squeaka2 is trolling in a forgein language. ;P
<1> heh
<3> odat, eh?
<1> ok
<1> so does /anyone
<1> er
<1> hit return too fast
<16> je sais pas parler fort anglais
<16> !!!!
<15> I don't know, try searching at http://ubuntu.cc.com.au/, squeaka2
<3> odat, oh, right, sepeate.
<2> doesn't it show up in lspci, Ivaldi ?
<1> does /anyone/ know how to get changes made to /etc/network/interfaces reinitialized?
<1> er
<1> applied.
<3> squeaka2, #ubuntu-fr
<1> not reinitialized
<5> tiede, yes it does, but I can't see it in the multimedia systems selector
<18> squeaka2, /join #ubuntu-fr
<9> Angel_Dex, you might need to dpkg-reconfigure xserver-xorg
<3> Ralith, sudo /etc/init.d/networking stop
<3> Ralith, sudo /etc/init.d/networking start
<1> alright.
<16> tiede tu peux seulement me dire dans quel ecole est tu
<5> 0000:02:0a.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
<5> 0000:02:0a.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 03)
<5> 0000:02:0a.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port
<2> does it show up in alsamixer.
<3> Ralith, that'll cut off net access btw.
<2> Ivaldi,
<5> alsamixer won't even start
<18> squeaka2, you are on international ubuntu channel, here we speak only english because there are too many different languages on world
<1> rikai, thought so
<14> anto9us i wouldnt get any preformance boost tho no? (not a gamer)
Return to
#ubuntu
or
Go to some related
logs:
gentoo azureus azureus-bin
scalix logrotate
speeding up Ubuntu
bcm43xx enable radio fc5
#oe
captcha beated
conky refresh rate
ubuntu + options usbhid mousepoll=
xgl conkey
perl __WARN___
|
|