| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79
Comments:
<0> my fault, too
<0> sorry
<1> How do I change file ***ociations in the gui?
<0> well, anyways, the usb drive ismost probably /dev/sda
<2> Red_Tide: VOIP + Voice Over IP
<2> s/+/=
<3> Hi. Can someone suggest a good download manager for ubuntu systems ?
<2> Red_Tide: how it works is another question.. :)
<4> muep_, error: could not determine real path of device
<5> hello, how do I install ubuntu from a USB stick`
<0> KenSentMe, is the usb drive a flash drive or a hard disk?
<2> Red_Tide: basically you can make voice calls over internet
<4> muep_, hard disk
<0> try sda1
<6> hi! how can I expand my disk space of ubuntu partition without lost data?
<4> muep_, asme error
<4> same*
<0> KenSentMe, did you use /dev/sda ?
<0> or /media/sda ?
<1> conmiweb, you could use qtparted
<4> muep_, sudo pmount /dev/sda(1)
<7> hello. where can i find a channel about gnuplot?
<8> graveson: ok heres how we do this let me know when ready
<6> so, it's possible, without lose data?
<2> muep_: the drive would most likely be /dev/sda1, not /dev/sda
<1> I have never heard of that being a problem
<0> thoreauputic, it depends
<1> you are just extending the drive length right?
<4> thoreauputic, both give the same error
<9> KenSentMe: do dmesg and look for the which USB detected a hard drive following the HUB lines..
<2> muep_: I know - partly depends what gets connected in what order
<10> xfcefreak: i am ready
<8> graveson: the last 2 lines need to have multiverse after the word universe with a space inbetween also the first line (deb cdrom) need to have a # infront of it
<0> thoreauputic, I have a usb device with no partitions, so I need to mount /dev/sda
<2> muep_: OK
<10> xfcefreak: done
<11> folks the video inside the window in xine is too small I want to make it in fullscreen how do I do that ?
<8> graveson: save than close the editor and than run sudo apt-get update
<1> Anyone know how to change file type ***ociations?
<2> chmod775: type f
<10> xfcefreak: in process
<2> chmod775: with the window in focus
<10> xfcefreak: i am still receiving gpg errors
<12> im back
<8> graveson: please pastebin the errors for me we will fix this ;)
<12> grave:you have probs with gpg too?
<8> blazemonger: paste you /etc/apt/sources.list to pastebin adn i will help you both ;)
<12> xfcefreak, :i'm debugging it myself :)
<8> blazemonger: ok ther eis no need for that just add the keys :(
<10> xfcefreak: http://paste.ubuntu-nl.org/12229
<4> PwcrLinux, look at http://paste.ubuntu-nl.org/12230
<4> PwcrLinux, no usb device seems detected
<1> !file ***ociations
<2> KenSentMe: have you tried running tail -f /var/log/messages then plugging the device in ?
<8> graveson: open terminal and paste this into it gpg --keyserver subkeys.pgp.net --recv 437D05B5
<4> thoreauputic, i'l' try it now
<8> graveson: typoe gpg than paste the rest
<4> thoreauputic, nope, nothing happens
<10> xfcefreak: just to be clear : i have to type "gpg --keyserver subkeys.pgp.net --recv 437D05B5'
<8> when thats done let me know
<12> http://paste.ubuntu-nl.org/12231 blender not running on system with ati rage 128 (it crashes at startup
<8> yes
<10> xfcefreak: done now
<9> KenSentMe: hold on
<8> graveson: heres next command gpg --export --armor 437D05B5 | sudo apt-key add -
<4> PwcrLinux, i'm holding on
<8> incluing the - at end
<10> i receive this on stdout: gpg: no ultimately trusted keys found
<10> and then "ok"
<8> graveson: run sudo apt-get update let me know what happens
<9> KenSentMe: seem not detecting them
<2> KenSentMe: try installing usbmount
<4> PwcrLinux, had the same problem on windows xp
<10> xfcefreak: that worked thanks. where can i find more info on this to understand what you have done
<4> thoreauputic, and then?
<8> ubotu tell graveson about Seveas
<8> graveson: in your pm
<2> KenSentMe: according to apt-cache show usbmount, that should help :)
<10> xfcefreak: now i am really confused . i have removed those seveas lines from my source file ?
<9> thoreauputic: Hmm, I plugged my flash drive and autodetected, then I worked on something and after it's done, I pulled my flash driver out of USB hub, so I checked dmesg, it's all says Dead I/O rejecting.. I guess my fault?
<8> graveson: look at top of page you will see gpg things
<8> go here
<8> !gpg
<13> from memory, gpg is https://wiki.ubuntu.com/GnuPrivacyGuardHowto or http://www.linuxgazette.com/node/8746
<4> thoreauputic, i've got usb, usb1, usb2 ... usb7 in /media , but all are empty
<12> xfcefreak, :did you get my pastbin?
<8> blazemonger: no
<12> http://paste.ubuntu-nl.org/12231 blender not running on system with ati rage 128 (it crashes at startup
<12> it works fine in windows though
<8> blazemonger: do you have 3d accel?
<12> maybe i should compile from source
<12> ati rage 128
<14> hello, any way to clean my ubuntu installtion? un-installing un-neccasry packages and such
<12> blender just crashes at startup i know my card is supported i read docs
<15> How can I read the icon text in a different language. in my case hebrew? In windows and mac osx, it works fine, but not in ubuntu. I installed hebrew language, but I dont know what it is, it still read the icon text as different letters and numbers. It doesnt show the hebrew fonts.
<16> !ff1.5
<13> You can use firefox 1.5 by following this wiki page https://wiki.ubuntu.com/FirefoxNewVersion
<8> blazemonger: comment out the first line please than add multiverse to any line that has universe in it save close sudo apt-get update
<17> hi, i installed dapper and then i tried to install XGL. when I was trying to test if XGL was working properly, (I restarted the gui), X crashed
<17> now i am no more able to get into the gui mode
<18> Arpan: reverse the Xgl installation.
<17> can anyone tell me how to get the gui going again
<4> i thin my mobo is broken. Thanx for your help thoreauputic, muep_ and PwcrLinux
<4> bye
<9> KenSentMe: ur welcome
<12> did that
<19> hmmm
<17> Chousuke,I should have thought of that
<19> which server is this ?
<17> thanx anyway Chousuke
<19> that bitchx connects to automatically
<20> hi. which ati drivers were improved in xorg 7, "ati" or "radeon"?
<9> Freenode
<19> cool, thanks
<18> SanderD: last time I looked at it, I didn't see radeon anywhere
<18> SanderD: so I suppose it's "ati"
<20> Chousuke: ok, thanks
<18> xserver-xorg-driver-radeon is a virtual package too
<8> blazemonger: that fixed your sources but to run blender iirc you _have_ to haave 3d accel and ati's are a beast to get that set up on
<12> xfcefreak, :i'm going to try to do a fresh compile from source
<12> that always solves my probs
<18> Depends on which ati you have. :)
<10> xfcefreak: errors again -http://paste.ubuntu-nl.org/12232
<12> at least for me at least
<18> older cards work out of the box.
<18> or should. :P
<20> Chousuke: it does work, but I can't get DRI, I think this older card should be supported
<18> What card is it?
<8> graveson: can i see your /etc/apt/sources.list please again
<20> Chousuke: radeon IGP 320M, I think that's an RS100
<18> SanderD: really old, then :P
<21> hi, all how to share files via blootooth
<10> xfcefreak: http://paste.ubuntu-nl.org/12233
<12> oh i know bhlender gets a segmentation fault
<22> hello, anyone who can answer some questions about vservers?
<22> i'd like to know, how root on the base system can kill/access processes on the vserver
<10> xfcefreak: excuse me but i have to go- will do this some other time-thanks for your help
<8> ok graveson
<23> hi all
<22> nobody here with experience on the vserver-topic ?
<23> What's the best program to view chm files?
<15> How can I read the icon text in a different language. in my case hebrew? In windows and mac osx, it works fine, but not in ubuntu. I installed hebrew language, but I dont know what it is, it still read the icon text as different letters and numbers. It doesnt show the hebrew fonts.
<24> something is wrong... i can't read my NTFS partition... is there a way to fix that?
<9> gn all
<15> beta_m: yeah, remount it
<24> what do you mean by that? "umount" and "mount" after that?
<25> beta_m: yes
<15> beta_m: yeah and mount it manually.. "mount -t ntfs /dev/xxx /mnt/xxx"
<24> it says that partition is busy when i try to umount it
<12> btw thanks for the advice on the multiverse deal
<24> and my hdd is going crazy
Return to
#ubuntu
or
Go to some related
logs:
kcontrol other languages
#perl
kubuntu deadkeys
ubuntu partial re-install
#math
#perl
debian owner iptables: No chain/target/match by that name
error while loading shared libraries: libming.so:
dapper hal --retain-privileges
marillot ubuntu
|
|