| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79
Comments:
<0> Tomorrow: unless you have more than one card, you don't need that
<1> MarineBoy: run the ubuntu live cd first on the box you want to install on to see if get a internet connection
<2> well I'm setting up my xserver
<2> because it didn't work before
<3> anything think i can play xvids on a 266Mhz laptop with 96MB of ram?
<4> any ideas on how to set up a secondary gateway for internet traffic (i have two isps and two routers). i'm afraid it is easy in windows because they have a default gateway and you can just add others in a list. I suspect it can be done with the route command, but have not figured out the right parameters to not confuse network traffic
<2> and I had to replace the ati driver with fglrx
<5> hi:)
<0> Tomorrow: for a single card, you can leave the bus id blank
<2> and now it wants to know my video card's bus identifier
<2> oooh
<2> ok
<6> _Dez: best way to find out is to try
<7> i tried the quotes
<7> error
<3> zig_ whats a lightweight video player?
<0> _Dez: maybe ;)
<8> Can anybody help me with jumpers? I need to reset BIOS in order to boot the new dist.
<9> joesmith, have you searched http://wiki.ubuntu.com?
<6> _Dez: maplyer is pretty light
<0> _Dez: I like mplayer
<9> _Dez: I like mplayer.
<7> so uhmm
<4> dawn: tried to find info on default / secondary gateways but no luck yet.
<10> Troel1: you'd look up your motherboard at your vendors site and find a manual.
<1> Dez : vlc
<9> suspect_, please paste the errors?
<0> _Dez: we have a quorum ;)
<3> k mplayer it is
<7> can someone type the exact thing im supposed to type?
<11> _Dez: mplayer definitely
<3> ;)
<9> joesmith, you have multiple interfaces on your computer?
<7> wine: cannot find '/home/suspect/.wine/c_drive/Programfiles/cod/codmp.exe'
<9> suspect_, find codmp.exe and tell me what the pathname is.
<4> no, set up a virtual eth0:0
<12> Wow...kewl all I get is audio with kaffeine, totem...This is a dvd that is currently playing on my desktop dvd player...all the files are installed per the wiki...any ideas?
<9> joesmith, can't help you then. I have no idea about virtual interfaces.
<10> suspect_: how could we do that. your home directory could be anything from /home/suspect to /home/bill to /home/tina. how are we supposed to know that? you can't just use your head a tiny little bit here and figure out if you'd need to replace something or other in that example?
<9> Zarephath, mplayer?
<7> well in cod sp the path is
<7> /home/suspect/cod
<8> Mathman: It's not possible to set up the system to boot from the new dist, whilst running Ubuntu?
<9> sigh.
<4> ***ume for the moment that there is two interfaces, what then/
<9> then do this.
<0> Zarephath: try with mplayer from an xterm - at least you'll see some messages; if you need more, mplayer -v
<9> wine "/home/suspect/cod/codmp.exe"
<9> that's it.
<9> and it still might not work, because you need DirectX, which Wine doesn't support afaik.
<13> Dapper doesn't have xlibs, how can I force Cedega to install?
<10> Concord_Dawn: wine does dx8 at least.
<9> there a new version of ubuntu due out soon? I've been out of the loop for a while?
<12> amphi: K thanks
<6> yup
<6> dapper drake
<9> Mathman, thanks.
<10> kfarrell: you'd install xlibs or whatever it is you need.
<7> could'nt load default_mp.cfg. Make sure call of duty is run from the correct folder.
<6> Dapper drake should **** less than breezy badger
<7> thats what is said
<14> are there any ati x800 64bit drivers?
<10> suspect_: change into that directory first before you run it then. wine ./codmp.exe
<12> amphi: sudo apt-get install mplayer doesn't find the file repos are enabled...
<9> damnit.
<13> I have cedega .deb file, can I force it to install in dapper. Dapper doesn't have xlib package per se, it has it installed in other packages?
<0> Zarephath: apt-cache search mplayer to get a package name
<10> kfarrell: why not just get the tar.gz then?
<11> ubotu: tell Zarephath about mplayer
<15> (Ubuntu 5.10) When setting up a samba printer share (intended for use by a win2k box) of a CUPS printer in smb.conf under the '[printers]' block the 'printer = ' value refers to the /etc/cups/printers.conf '<DefaultPrinter LaserJet-3P-w/-PCL5>' string, right? So I'd put, 'printer = LaserJet-3P-w/-PCL5' in smb.conf?
<12> amphi: Kewl that was the next question :-O
<9> ok, debootstrap exited with an error code 2 when I tried to install Breezy on my desktop. Can someone tell me what might cause this?
<7> this is the exact location
<7> "/home/suspect/cod/CoDMP.exe"
<11> suspect_: just run wine and PLEASE stop using enter as punctuation
<14> are there any ati x800 64bit drivers?
<9> suspect_, you fail at Linux. Please reformat and go back to Windows. If you can't figure out how to run a program from terminal, you don't deserve to run Linux.
<10> suspect_: and is there a foo.cfg or whatever there?
<13> Mathman, I only have the .deb version
<9> debootstrap exited with an error code 2 when I tried to install Breezy on my desktop. Can someone tell me what might cause this?
<7> in the localtion?
<0> Concord_Dawn: now, now ;)
<10> kfarrell: then stop pirating software I say
<16> Suspect you will eventualy figure it out
<9> amphi, you mind helping me? :-P
<0> suspect_: you need to read the docs for wine, it would seem
<7> i just dont know how to play codmp on this linux joint
<9> wow.
<10> linux joint. yikes.
<9> IT'S NOT THAT HARD.
<13> Mathman, well since I paid for it, <insert expletive here>
<7> i know alot about windows
<3> wow xfce4 runs way smoother then flux
<10> kfarrell: since you paid for it then, why couldn't you easily get the tarball?
<9> TYPE wine "<pathtocod>/codmp.exe" jeesus.
<7> but i added this new hard drive and i wanted to install linux ont he new one
<17> hi
<9> sigh.
<17> is making my fat32 writable in linux any safe
<17> ?
<7> but instead i erased windows from the old one and i didnt feel like installing windows back
<9> yes.
<11> vinboy: it's fine
<7> so i came to ubuntu
<9> suspect_, you need to read the "Linux for Dummies" book before you start using Linux.
<0> kfarrell: --force-depends ?
<10> suspect_: nobody needs to hear your life story
<7> mathman shush
<0> suspect_: there's a handy 'intro to linux' book you can d/l from tldp.org, FWIW
<18> anyone know why I cant get a connection via SSH from my WRT54G and my Ubuntu Linux box, but putty works fine... i get this error: ssh: connection to wenko@192.168.1.201:22 exited: No auth methods could be used
<17> _jason: ok.. thans
<16> With windows every thing is turned on with linux you must turn what you want on
<13> amphi, ahh, ty. I'll give that a try
<0> kfarrell: otherwise, man dpkg ;)
<9> amphi, can you tell me why debootstrap would exit with an error code of 2 while trying to install on my desktop?
<1> suspect_,: http://www.linux.org/ could be help for some liunx learning
<9> This desktop ran Hoary just fine.
<0> Concord_Dawn: in a word, 'no'
<8> Mathman: I'm sorry to bother you, but can I make the system boot from the disk. Can I configure this in Ubuntu? Maybe something init or...?
<9> list of possible causes then? :-P
<19> how do I get k3b to burn mp3'S
<8> Mathman: It won't open BIOS.
<9> Troel1, BIOS controls the boot order.
<16> Hey suspect don't listen to anyones crap about you need to go back to windows.
<9> oh, nvm.
<0> suspect_: for this particular problem, you may find useful docs in /usr/share/doc/wine, dunno, never used the thing myself
<11> ubotu: tell suspect_ about cli
<20> how to convert string to integer using c++?
<13> amphi, Thanks, worked fine. I forgot about --force-depends
<10> Troel1: you'd need to access the bios setup. well, I spose you could do it from linux perhaps if you're all ultimate, but nah, you'd need to access the bios setup screen.
<11> suspect_: if you follow those tutorials ubout just sent you, I think you will have a much easier time
<20> and how to convert integer to string using c++?
<0> [cro]smiley: atoi(3) ? ;)
<18> anyone at all able to help me?? .anyone know why I cant get a connection via SSH from my WRT54G and my Ubuntu Linux box, but putty works fine... i get this error: ssh: connection to wenko@192.168.1.201:22 exited: No auth methods could be used
<20> amphi, and string to int?
<3> whats the cmd to install mplayer
<8> Mathman: I'll just have to try another thousands times then ;) Thanks for your help anyway :)
<10> suspect_: or you could listen to what I told ya about 15 minutes ago and change to the directory your program resides in before you try and run it.
<20> amphi, sorry int to string?
<11> ubotu: tell _Dez about mplayer
<21> one question that is really annoying me.. For some reason, there are 5 users showing connect at the same time to me. However, it does not help tp kill all the process, relog, restart, turn off the internet. Nothing! can someone please help?
<3> ty
<7> i dont get it
<8> :P
<0> [cro]smiley: snprintf? these are standard c lib funcs, BTW
<10> suspect_: in the shell. the cd command. you know what a shell is?
<20> amphi, it works in c++?
<10> suspect_: cd /home/suspect/call_of_duty
<7> yes
<7> terminal
Return to
#ubuntu
or
Go to some related
logs:
unset($_REQUEST)+php
java quartz daylight saving
gtf etch debian
gentoo rt61 amd64 hang
#debian
#mysql
DCC SEND 1234567891011
cannot find terminfo entry for rxvt-unicode
xchat gethostbyname fails
#oe
|
|