| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83
Comments:
<0> there's always a keg of beer and a block of cheese
<1> markk: what video card?
<2> Mosi: Thanks... I am going to look at that file in a few minutes...
<3> radeon 9700
<3> pro
<1> markk: and you've installed the drivers per the HOWTO ?
<3> yes
<3> all 4 installs, yes
<3> only the first one worked
<4> j-linux: sda1 is one of those files (the full path name is /etc/sda1). What happened when you switched your hard drive around was that it is now pointed to by a different device file.
<5> Salah, did it install?
<3> and yes, formatted the drive each time
<6> yah i did it but it says
<7> What do I need to do in order to fix this?E: /var/cache/apt/archives/libnautilus-extension1_2.12.1-0ubuntu1.2_i386.deb: files list file for package `dmidecode' is missing final newline
<6> some file not updated
<3> i'm using fglrx
<1> markk: what is the output of this command ?? glxinfo | grep direct
<5> ok, see if it installed. type
<5> whereis ndiswrapper
<4> j-linux: when your computer boots, what happens when you do LS from the directory you start out in?
<2> Mosi: is there any way to figure out what it is suppsoed to be?
<8> hai
<3> direct rendering; yes
<2> Mosi: I get a strange looking file system (no home directory)
<5> ndiswrapper: /usr/sbin/ndiswrapper /etc/ndiswrapper /usr/share/man/man8/ndiswrapper.8.gz
<4> j-linux: it would be easier if i could see it, but we should be able to figure it out
<5> should say something liek that
<1> markk: have you tried other openGL games?
<6> yah
<9> LMFAOOO .... http://www.demonlegion.net/private/Hammer/Screenshot3.png
<3> no
<5> so it installed
<6> that's true
<4> j-linux: can you name two or three of the files in the directory you're in?
<2> Mosi: I think I tried typing 'emacs' with no luck.,
<3> I don't know of any other games this demanding
<6> now what is next to do
<4> j-linux or directories
<2> I think there were the regular directories: dev, etc, bin
<5> ok, is your terminal in the same directory as your drivers
<10> Anyone have a link to the flight 5 release notes?
<4> j-linux: what's in /home?
<5> type ls to see if they are there
<11> Half-Left, i dont have that blacklist file in /etc/modprobe.d/ any idea?
<2> Mosi: I couldn't find a home directory...
<5> bcm43xxa.cat bcmwl5.PNF bcmwlhom.ini data2.cab layout.bin setup.inx
<5> bcm43xx.cat bcmwl5.sys bcmwlntp.sys ikernel.ex_ setupa.ini setup.iss
<5> bcmwl5a.inf bcmwld2k.exe bcmwlu00.exe infcache.1 setupd.ini sp29842.cva
<5> bcmwl5a.PNF bcmwlhoa.ini data1.cab is.exe setup.exe
<5> bcmwl5.inf bcmwlhom.exe data1.hdr launcher.ini Setup.ini
<5> you should see something liek that.
<10> heh
<12> hey guys
<12> in terminal
<12> could I CD into a hidden folder
<4> j-linux: is the directory itself not there, or no files in it?
<12> cause, cd .mplayer isn't working
<10> A bunch of windows drivers
<13> Morrowyn, I'm in Dapper so
<1> blanky: yes
<14> volCOM_b0i: !flood
<6> not really
<14> !flood
<15> it has been said that flood is for pasting, please use http://pastebin.com , http://paste.ubuntulinux.nl or #flood here on freenode.
<6> I have in CD
<6> Should I copy in dextop?
<16> volCOM_b0i: One of those evil buggers can be used natively in Dapper.
<12> jorge@blank:~$ cd .mplayer
<12> bash: cd: .mplayer: No such file or directory
<2> Mosi: I didn't see a home directory there... very strange
<10> !info gnome
<14> bcm43xx can be used natively in Dapper
<1> blanky: then the directory isn't there
<15> gnome: (The GNOME Desktop Environment, with extra components), section universe/gnome, is optional. Version: 1:2.10.1.1ubuntu1 (breezy), Packaged size: 10 kB, Installed size: 40 kB
<5> cafuego, i thought i saw it detect my card in dapper install!
<4> j-linux: that is strange. can you pastebin the contents of the file /etc/fstab? ( http://paste.ubuntulinux.nl )
<16> volCOM_b0i: I use it (pcmcia) on my laptop and on my wife's iBook.
<10> The package size looks a bit off :)
<0> bcm43xx is evil in dapper
<16> !bcm43xx
<15> bcm43xx is, like, You can get a working firmware set from http://www.cafuego.net/stuff/bcm43xx_firmware.zip for your bcm4306 based card (iBook, Powerbook)
<2> Mosi: I will have to reboot: I am stuck in Window$ at the moment.
<4> j-linux: ok
<6> wheer I should copy?
<7> What do I need to do in order to fix this?E: /var/cache/apt/archives/libnautilus-extension1_2.12.1-0ubuntu1.2_i386.deb: files list file for package `dmidecode' is missing final newline
<5> wow, I only know the ndiswrapper route, I will check this out when dapper is stable.
<4> j-linux: wait
<10> !info xfce4
<4> j-linux: post the contents of /etc/grub.conf and /etc/p***wd while you're at it
<15> xfce4: (Installs Xfce4 core and scripts to set it up), section universe/x11, is optional. Version: 4.2.2 (breezy), Packaged size: 4 kB, Installed size: 64 kB
<2> Mosi: ok
<16> volCOM_b0i: If wpasupplicant wasn't so crappy, it would rock :-)
<5> how do you get it installed native in dapper?
<10> !info jwm
<11> ok\
<2> Mosi: I'll be back in a few minutes.
<10> :( no jims window manager
<4> j-linux: ok, i'll wait
<2> Mosi: thanks for your help.
<10> or is it "joe"
<5> salah, make a folder in your HOME called wlan
<4> j-linux: no worries, giving back to the community :)
<17> I love Ubuntu!
<16> volCOM_b0i: You install dapper, and fetch that firmware zip, place firmware in /lib/firmware/$(uname -r) and it works.
<17> i wish i could marry it
<17> but Bush would say that's against the constitution!
<0> cafuego, not for me :p it freezes my system
<13> Morrowyn, see if there is a blacklist file, do locate blacklist
<0> and causes kernel panic
<5> does it need to be the firmware zip? Or can i use the files from my restore disk?
<17> is the Dapper delay definite?
<11> its in /etc/hotplug :)
<0> !dapper
<15> The next release of Ubuntu is Dapper Drake - /join #ubuntu+1 for discussion
<16> randabis: Got a non 4306?
<6> Yah I made it
<5> ok, got them copied salah?
<6> yah
<6> done
<16> volCOM_b0i: You need the extraced frmware, you cna use a util to get it from the windoze drivers, but it's h***le (and I _know_ mine work :-)
<10> !info xgl
<18> arivne
<0> cafuego, yes, I bcm4318..I don't use the firmware you provide though..I use the firmware I got from using fwcutter on the driver that works with ndiswrapper
<5> ok salah, are you on the computer right now that you are trying to get working?
<6> yah
<16> randabis: Mine works on my linksys card and the iBook, i got it by using fwcutter on a firmware for an access point.
<6> I am using lan
<12> guys, for the new firefox, https://wiki.ubuntu.com/FirefoxNewVersion says i need the tar.gz file, where can i find it here ? what director? http://ftp.mozilla.org/pub/mozilla.org/firefox/releases/1.5.0.1/
<19> hey
<5> ok take a terminal to that wlan directory
<19> when i do sudo apt-get install nabi
<19> it says it cannot find the package
<0> cafuego, yeah, I think it's just not gonna work with the 4318
<11> eubenesa, try adding the proper repository to your sources.list
<11> and do a apt-get update
<19> morrowyn, how?
<20> blanky: http://ftp.mozilla.org/pub/mozilla.org/firefox/releases/1.5.0.1/linux-i686/en-US/firefox-1.5.0.1.tar.gz
<5> are you there, type ls to make sure.
<19> i got it
<19> thanks
<11> i dont know in what rep nabi resides, but searcg on that
<6> yah
<5> you should see the bcmwl5.inf file
<6> I got it
<6> yah I can see
<12> thats what i thought Toma- but I got i386 (athlon xp +2500), isn't i686 for 64 bit?
<5> ok, now type ndiswrapper -i bcmwl5.inf
<5> sudo first
<13> blanky, http://www.mozilla.com/
Return to
#ubuntu
or
Go to some related
logs:
xtensoftphone + fedora
install-rmvb
#debian
#physics
cannot connect to mythbackend
la_IT locale
#sdl
gnome vrsion of dapper
#perl
how to change startup graphic
|
|
