| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78
Comments:
<0> GTX, mkfs.vfat -F 32 <device>
<1> hi all
<1> somebody have got FREEDOOM?
<2> kenny_sp, should that format the drive
<2> and not lose the data?
<3> AnsiC: btw, no-ip is not listed on http://ez-ipupdate.com/
<4> bin neu
<5> GTX: that command will destroy all data
<0> GTX, You'll lose your data doing that!
<2> i want to keep data
<6> hey there
<1> Freedoom? Anybody?
<0> GTX, You have to do a backup
<3> AnsiC: was no-ip offered as a choice in debconf?
<5> GTX: your first move should be to back up your data
<6> i installed 5.10 on a compaq presario 6033. on the initial boot, it hangs after/while initializing hotplug. any ideas?
<7> anyone know how to update adaptec/aacraid drivers...i have downloaded the source from adaptec but when i do make - it error with "no target"
<2> ive done that
<0> if you've done a backup, you can run mkfs.vfat and then restore the data
<6> any ideas?
<2> just by dragging it accros?
<8> stromax, i got compaq too, if it hangs on hotplug, just turn off power and back, works for me every time..
<9> there is a program like bitcomet for linux
<9> ?
<10> oh my god
<8> C-O-L-T, azureis
<7> gtx: backup the data, then verify it...i dont trust backups
<6> mementor: i tried booting it several times... it always hangs there
<8> *azureus
<11> http://www.rafb.net/paste/results/V2v9z715.html
<11> topyli,
<9> mementor: thanks
<12> excause me..
<12> I want to write in korean..
<12> what can I do for that??
<11> topyli,
<11> http://www.rafb.net/paste/results/V2v9z715.html
<11> can you look please?
<13> heoay: you should install some korean input method
<3> AnsiC: dyndns offers hostnames like that?
<12> I was "click." but I cannot go to it
<14> apper: if I do a apt-get install base-config (to have apt-setup) it conflits with locales (nl and en) and java (j2re1.4)
<14> dapper: if I do a apt-get install base-config (to have apt-setup) it conflits with locales (nl and en) and java (j2re1.4)
<3> AnsiC: wbn.ath.cx
<11> yes
<12> ??
<11> i use that host every day
<3> AnsiC: pretty nice. sounds like a real hostname :)
<11> but is stressant login everyday manuali
<13> heoay: dunno then:)
<12> T.T
<11> that ise the rals hostname
<15> topyli link doesnt work
<3> AnsiC: i can't ping you
<11> dydns do not tell other about
<11> if you want strange host you must pay money
<12> t.t
<11> ath.cx is free
<3> AnsiC: well, you can buy domains of course
<12> where is it??
<16> heoay: ENASOHUH|S`
<11> BY ????
<11> buy
<16> You wanted Korean?
<16> I can help you a bit ;)
<12> yes..
<12> oh..
<16> However I don't speak Korean at all ;)
<15> !kr
<17> owner: Wish I knew. Try searching at http://ubuntu.cc.com.au/
<11> i buy in other words
<12> yes..
<11> i go eat
<11> by
<18> jeroenvrp: search for bugs/file bugs/or last but not least fix on your own dapper will not be supported until april
<3> AnsiC: sure. well, perhaps "rent" is better for registering a domain
<16> sudo apt-get install uim-applet-gnome uim-xim uim-gtk2.0
<12> what is that?
<14> gnomefreak: I know
<12> where is it? is that in internet?
<19> ok, anyone here familiar with raid-1 arrays? I have one, or at least, I think I do. Looking with cfdisk, I see a linux raid autodetect on my first drive, but on my second drive it just shows free space. /proc/mdstat reports two drives in use, but I don't see the partition. Wtf? I just followed the ubuntu installation instructions :(
<20> Hello, is this a channel for help with ubuntu?
<21> :o
<5> gujolee: yes it is
<22> i suppose it would be
<16> heoay: it's a command
<16> heoay: brb
<16> heoay: read this in the meantime: https://wiki.ubuntu.com/JapaneseInputHowToInBreezy
<23> sorry , how can i shutdown ubuntu on qemu
<22> can you guys even see my text?
<16> heoay: it works perfectly with Korean
<24> i can see your text Jeeaar
<23> i have try the command shutdown -h now and init 0
<22> thanks
<23> but it wont hhelp
<20> ok, here is what's happening, I change the configuration of my ubuntu to login automatically and now it doesn work. It loads the ubuntu but i can't use it.
<12> thanks..
<23> there is still qemu windows
<12> I use linux.. first
<21> Oh well, I guess I should ask a question too, one more shouldn't hurt ;)
<12> and I cannot write in english well
<21> I can't resize my windows partition, what could be wrong?
<12> -_T
<20> can i do something, or should i reinstall?
<3> gujolee: you get to the login screen but cannot log in?
<25> Skiddles^: is it fat32 or ntfs?
<21> ntfs
<24> Skiddles^, what filesystem is the windows partition ?
<20> i don't get it, but i can use the terminal pressing ctrl alt F5
<26> Can anyone help me install the newer version of Firefox onto Breezy?
<15> !firefox1.5
<17> You can use firefox 1.5 by following this wiki page https://wiki.ubuntu.com/FirefoxNewVersion
<25> Skiddles^: i don't know if resizing ntfs partitions is supported, because writing to ntfs isn't very safe either
<15> you can resize ntfs partitions
<15> but i would use a livecd
<26> I tried following that wiki page but I get stuck on installing it after downloading it.
<15> gparted livecd
<20> topyli, before i was log in normally with my user and p***word, but i changed my configuration to load my user without asking anything
<23> sorry , how can i shutdown ubuntu on qemu
<3> gujolee: you could do ctrl-alt-F2 to get to console. login at the console and edit /etc/gdm/gdm.conf. in the very beginning of the file, change AutomaticLoginEnable to "false"
<24> Mephis, 'sudo shutdown -h now' ?
<23> shutdown -h now cant completely exit qemu
<3> gujolee: i have no idea why it doesn't work though
<27> is there a way to get the 855gm driver provided by intel to work on ubuntu ?? (http://downloadfinder.intel.com/scripts-df-external/Detail_Desc.aspx?agr=N&Inst=Yes&ProductID=922&DwnldID=9722&strOSs=39&OSFullName=Linux*&lang=eng) <--- thats the driver im talking about
<21> Gah, violent window snapping in Ubuntu :P
<23> d0dg3r, i have tried , but it doesnnt exit qemu
<23> d0dg3r, it only shutdown ubuntu on qemu not the whole one
<15> httpdss, when i compiled my 2.6.15 kernel recently, i saw an option for that intel display chipset
<23> even init 0 doesnt
<26> Anyone? o.O;;
<24> once its shutdown Mephis u can exit qemu no ?
<24> not familiar with qemu
<5> Skiddles^: CoolKast: resizing ntfs is acceptable
<21> :o
<23> it already shutdown , but i cant exit qemu
<23> d0dg3r, any idea ?
<24> dont know what qemu is Mephis , its a virtual emulator ?
<23> d0dg3r, yes , just like vmware
<23> but qemu is free
<24> just kill it then - 'sudo killall qemu'
<15> sudo killall -9 qemu
<23> oko
<23> let me try
<20> topyli, thank you.
<28> SOL
<23> thanks
<18> what does the -9 do?
<15> kills any sub processes of that
<15> i think
<27> owner: the kernel im using now 2.6.12, also has that driver, but its not the one provided by the vendor, and when trying to dual-head its almost imposible to get what i really want .. :-S
Return to
#ubuntu
or
Go to some related
logs:
#ai
#css
XMLHttpRequest send-xml
ubuntu super key keyboard troubleshooting
yast does't work on suse 10.1
Sorry couldn't display all the contents of Windows Network
dapper unneeded services
#linux
#php
argv windows sctipt perl
|
|