| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
Comments:
<0> And its working but its going slow
<1> computer spec
<0> Like moving a window its all messed up
<2> this is an article on suse 9.3 actually from the Linux Magazine - (www.linux-magazine.com) - June 2005 issue... page 47 says "According to Novell, creating a seperate Ext2 or Ext3 partition for /boot improves the speed of the suspend process. This said, after following Novell's advice, we did not notice any difference in our testing."....
<0> But i have a nvidia gfx card and i installed the driver from YOU and im not sure what to do now
<0> Like shouldnt it have auto done it
<2> so I apologise, its not from Novells site, heh... i just remembered where I got it from
<3> What do I use to maintain contacts within a group? Yahoo groups? Any other suggestion? Additional functionality over a mailing list is welcome. It could be a public web service or something to install on my router...
<3> "my router" == suse box
<4> God_HollyWood, try installing the driver with you online again
<0> i need to do it twice?
<4> not normaly no
<0> Well uhh
<5> !nvidia
<6> If you are not using YOU - Yast Online Update to setup your card, read carefully: http://www.suse.de/~sndirsch/nvidia-installer-HOWTO.html
<5> God_HollyWood: try the manual install
<0> Would rather not use something like taht
<7> hrm im actually starting to like yast now...
<8> does suse have DMIX?
<2> yast rocks :P
<4> I have had you fail on me, but reinstalling the driver with you worked -> reboot afterwards
<0> its showing up in hardware info
<7> anyone played with compiz and xgl yet?
<8> hey all
<8> does suse have the alsa program dmix
<0> where do i turn on 3d accell
<9> !xgl
<6> For XGL instructions go here: http://en.opensuse.org/Xgl : You need 10.1 beta 3 or newer
<5> enterusername: yes dmix is configured automatically. but dmix is not a _program_
<2> sPiN: http://www.linux-magazine.com/issue/55/Suse_Linux_93_Review.pdf
<4> God_HollyWood, if you driverinstall works, 3d is autostarted
<10> What suse really does differently as other distros with USB2, i thought i solved my USB2 harddrive problem by disablin acpi and apm but now. Again everytime when i open /media/ harddrives starts reading about 10-15 seconds and then i can see DVDRAM & LACIE & LACIE disks. Then if i open other USB drives it takes again 10-15 seconds to show what's inside it. And if i go back it takes again same time. Now im downloading files from webpage and kdialog ask wh
<10> "save to disk" and suse starts readin 10-15 seconds those USB drives, after that kdialog opens and it shows (as it should) user directory. Everytime when i choose to save something it starts reading those drives.... why suse ****s on this simple task?
<6> No, I disagree, Fri13- is the one that is the ****.
<7> ahhh beta 10.1
<7> time to format a box to play :P
<2> spin: pg 47, above "Conclusions".
<9> thanks four86
<0> Hello
<0> i tried the YOU thing again and it still is going slow
<10> Hmm... mayby my problem is that suse "finds" my USB2 harddrive again and again when ever i open any filemanager what like to check fstab/mtab. Like kfiledialog, amarok, yast, digikam etc.
<11> For XGL instructions go here: http://en.opensuse.org/Xgl : You need 10.1 beta 3 or newer == WRONG!
<11> I'm running it on 10.0 right now --- *drool*
<12> will XGL come with suse 10.1 final?
<11> I reckon it will.... others disagree
<13> wal: it works?
<12> looks nice and juicy
<11> They appear to be delaying Beta and RC releases in order to incorporate Xgl and compiz
<11> You bet
<13> wal: Is it hard to get it working? (newb.)
<11> You are all spinning around in 3d on y desktop right now!
<13> wal: What gfx card you have
<9> i think the delay is due to the new package management
<11> Hard? For a newbie it might be - I had already upgraded to KDE 3.5 using YAST. I have an Nvidia card. Try this link for guidance - I followed the instrucvtions to the letter and it worked immediately. http://en.opensuse.org/Using_Xgl_on_SUSE_Linux
<11> Hairulfr, take note of the section saying version 10.0 & less
<14> 10.1 beta 5 was out today I think
<13> wal: n1, thank you. I've already looked at it, but ppl told me it wouldnt work..
<13> I have kde 3.5 as well
<11> The only thing I've lost is window decorations, as they are yet to release a KDE_window_decorations manager
<9> wal, you are on 10.0?
<11> 10.0 yes
<9> and you got xgl going huh? xorg 6.9?
<0> can anyone tell me why my computer is going extreamly slow?
<13> God_HollyWood: No... :/
<0> I just installed suse 10 and i have the nvidia driver all installed and its still slow
<13> God_HollyWood: What comp you have
<0> dell
<0> dimension 3000
<13> Sakuya: My friend just had one removed...It was a cyst
<1> o.o
<13> Sakuya: It was full of puss and all kinds of nasty ****, the doctor punctured it and the intern almost puked... But it wasn't malignant or anything
<1> it forms in one night?
<1> pretty sure it wasnt there last night lol
<13> Sakuya: Where on your neck
<0> Anyone be able to help me?
<1> just at the jaw joint
<0> Im betting i dont have a good enough computer to run 10.0
<13> Sakuya: Ok, that is probably normal, those are glands, and they swell up during infections/illness - so that might be it,
<15> god_hollywood: are you running gnome?
<0> No
<0> KDE
<15> did you install EVERYTHING off the CD's?
<0> no lol
<15> do a "top" and see what's running
<0> and post where?
<13> Sakuya: Hehe, it just now a lot of usefull crap
<1> Hairulfr, i have no illness/infection right now.. or i have one that i cant tell..
<15> post??
<9> swollen glands are common when it comes to pending sickness
<13> Sakuya: You might be getting ill, ? It is probably that, mine swell as well, and if it came overnight...
<1> hahaha
<1> http://i36.photobucket.com/albums/e5/compunerd92/pic29022.gif
<0> aergern,
<0> erg
<0> aeRoSoL,
<11> KDE 3.5 + Xorg 6.8.2 + Suse 10.0 + Nvidia 6600GT +Compiz + Xgl = goodness
<1> bah i dont really care
<0> i have stuff like
<0> 11058 root 15 0 27716 18m 3904 S 9.0 3.6 1:00.84 X
<0> 11446 colin 15 0 28812 14m 11m S 2.3 2.8 0:00.82 konsole
<0> 11233 colin 15 0 44884 15m 11m S 0.3 3.1 0:06.95 xchat
<0> 1 root 16 0 692 268 224 S 0.0 0.1 0:01.31 init
<13> Anyone know how to get RSS feed working in FF? I've tried diffrent ext. but none work? And I cant add them
<0> Mem: 514636k total, 506640k used, 7996k free, 58760k buffers
<0> Swap: 522072k total, 3032k used, 519040k free, 258492k cached
<0> I dont see anything wrong there
<15> 514 total and 506 used? you don't see anything wrong?
<0> mmm yeah i see that now lol
<0> What do i do ohh guru of computer wisdom
<15> you only have 8 megs of REAL ram free!
<15> turn the services off that you don't use
<15> would be a good start
<0> I dont have any services running that i can think of
<9> God_HollyWood, that is fine
<0> But i will look
<9> aeRoSoL, it is supposed to be like that
<0> then what do i do...
<0> ?
<9> wal: thanks for the info man, thats what i have going on my 64bit desktop
<1> wait.... whats using all that ram?
<1> 7996k free?
<0> should i lower the run level?
<13> Mine says 699Mb ram. :/
<9> that is how linux uses ram... it is perfectly normal, google on it if you want more info, im not going to explain it again
<1> yeah but God_HollyWood got like 7996 k of ram free?
<1> ah ok
<0> I dont really need it explained
<1> yeah i know it does say something silly like that
<0> I just wanna know how to get my computer running decent
<15> how do you free up buffer cache in suse?
<16> Hey, I've just set up Suse for the first time, and I need to be able to use it as a file server
<16> So I set up SMB, and can access my home accounts, and my LVM for shared data
<16> The only problem is when I try to copy anything to the LVM it basically just stalls the whole system. My processor shoots up to 100, and dies...
<16> Is there a mechanism to fix this? Does anyone know anything about LVM's?
<17> anybody got a smb/win32 box around?
<18> ohgood: I do
<18> winxp
<18> and its on my network via smb
<19> to be able to go on the net what port my girl friend need to let open on her router?
<15> marccollin: 80 for web
<16> that's for incoming though
<18> 80 for httpd....and thats usually open already
<16> Well, for cretating new connections....
<18> not usually closed by default
<19> ok thanks i will say it tomorrow..... surely open...... but i think her router open all port by default....
<9> !xgl
<6> For XGL instructions go here: http://en.opensuse.org/Xgl : You need 10.1 beta 3 or newer
<20> marccollin: thats not a very good idea though with a win box behind i believe
Return to
#suse
or
Go to some related
logs:
#centos
Logitech V200 ubuntu acceleration
rtorrent nohup
breezy modprobe pvmove
icedata500 firmware
error _X_SENTINEL gentoo Xlib.h
making unicode using numpad
#python
msmtp centos
sale minarale
|
|
