| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
Comments:
<0> hey all
<1> 6.8
<1> its been like this since i ran the updates a little while ago
<1> http://www.ccat.co.nz/special/weird2.jpg
<1> more weirdness
<1> thats in the window config
<1> everything seems to be randomly coloured.
<1> the kde bar has changed with the update too. note the dividers are little high res bar thingies
<1> in the last update i got they were just invisible
<2> Does suse come with java support?
<1> if you get teh eval or full version, otherwise its just a source you add and it does
<1> !java
<3> Add this to your installation sources to get java on Suse 10: http://suse.mirrors.tds.net/pub/opensuse/distribution/SL-10.0-OSS/inst-source-java/
<2> Thanks = )
<1> np
<1> any ideas sPiN ?
<4> nope
<1> hmm. might have a look through yast
<5> Navi00: note that you should use another mirror than tds.net if you're not in the US
<1> cant see how to turn it on or off or even what it would be called.
<5> lilyt: hmm... well, SUSE 10.0 includes a kernel with Xen support
<5> lilyt: so I guess the easiest way would be to make a SUSE 10.0 installation into another partition
<5> lilyt: and make sure to install the "kernel-xen" package
<5> lilyt: you can still add it after the installation though
<5> lilyt: and for the rest, well, it's Xen magic
<6> anybody familiar with the feature in yast that allows you to take screenshots during installation? Can I take a full screen shot when there's a small window popped up, i.e. "put in cd3"
<4> cb400f, i use vmware for that
<5> cb400f: easiest option for making screenshots is installing through SSH+X on a remote host ;))
<1> oh hangon, is there some sort of accessability tool in suse ? its dotted all the group panels with red.
<5> cb400f: or through VNC, if the other PC is on cra^H^H^Hwindows
<1> looks like its made for someoen to read who's blind.
<6> yaloki: nah.. this is real easy.. press print screen > save to floppy mounted from terminal
<5> |rbnz_64|: nothing particular on SUSE, would rather be on KDE or GNOME
<1> right. so yast then ?
<5> cb400f: oh, ok, didn't know that feature
<5> |rbnz_64|: no, totally not yast
<5> |rbnz_64|: KDE control center
<5> |rbnz_64|: (if you're using KDE)
<5> there are also a few accessibility settings in X
<1> hmmm. dunno how to get into that, just opens yast
<5> dunno what they are though
<5> |rbnz_64|: you're using KDE, right ? or is it GNOME ?
<6> yaloki, sPiN worked like a charm.. only one problem .. with the shots where there's a popup-window.. guess there's a way around it.. perhaps alt+prt sc .. but noticed too late.. Beineri hooked me up with this how-to http://www.suse.de/~sh/yast2/screen-shots/
<5> you could have a look in yast2 -> hardware -> graphics... to review the accessibility settings of X, but my guess would rather go with KDE or GNOME, not X itself
<5> cb400f: good one, thanks for the link
<6> yaloki: np, it's neat stuff
<7> heh. it wasn't in gnome. switched back to kde and its ****ed.
<8> yaloci,thanks but i was wondering if i can something else from qemu maybe?
<7> have just turned off the machine. man i hate bugs
<7> in gnome it was fine.
<7> like the new startup sound too
<7> ...havent used gnome in bloody ages
<7> maybe its time i switched
<7> at least theres no anoying highlighting
<5> lilyt: qemu would be an option too, but it's really slow
<8> i dont want to install every distro with i want to 'play' on a physical disk.and iwas wondering if i can do this from inside my distro.
<5> no, unfortunately not (except with vmware or qemu)
<4> www.osdir.com has a nice ***ortment of screenshots of many distros
<8> vmware images is compatible with xen or ihave to make something else?can i install it to my disk image ?
<6> sPiN, lilyt check out www.linclips.com too - for swf-demonstrations of many distros
<4> very nice
<8> i will but ithink that it will like scratching wounds.i want to say that if i can create xen image throu vmware to my physical partition.
<8> sorry about my english.
<7> lol. well, got rid of the colours by messing with "styles". now every hotkey has a "(!)" infront of it
<9> nn
<10> nn
<11> my burner only burns cds at 4x even though it is a 24x and I have 1gb of ram, how do I speed that up?
<4> S330d3r, try enabling dma mode
<4> yast - hardware - ide dma mode
<12> hello i have set up suse to use a static ip on my home network...but now that it has a static ip it no longer sees the wan( i cant ping google or any website) but if i go back to dhcp it works....i thought it could be a lack of nameservers but even after adding them i sill cant ping anything outside my lan..does anyone have any ideas?
<12> its not a huge deal if i cant set up a static ip...but dont see why it would work
<4> SpAwN, sounds like you are improperly setting up that static ip
<4> why not have your router ***ign it a static ip based on its mac address
<12> i set the ip it uses(which it can use) and set the subnet mask
<12> sPiN: i dont think my router can
<11> sPiN, it is set for UltraDMA/33
<4> S330d3r, well thats what you want
<12> i asked linksys and they just told me to set it up like i did
<4> SpAwN, look into upgrading your router firmware and check again
<11> sPiN, yea, but it is burning at 4x
<4> chances are pretty good that you can
<1> well its kinda working i guess, the only place the "(!)"'s show up is in the main suse menu
<12> ahh yea i do have the newest fireware for my router
<4> S330d3r, well you got other problems then, and ive never had that problem so i cant help you further
<12> it is a old router though
<4> SpAwN, if you cant get a static ip from the router, then try to set it up again with suse and be sure to point it to your dns/gateway
<12> the way i set it up has worked b4 on my mandriva linux and with windows
<12> sPiN: in the network config that suse uses it never asked for my gateway
<12> but it still did connect and get the static ip
<12> it only asked for the ip and sub net mask
<4> network services - dns and hostnames
<12> ahh k so i should make one of the dns ips my routers gateway??
<13> is there anyway to get my router to recive wireless signals instead of send them?
<1> lol. bzflag is bizarre
<12> hmm very weird....ive got the static ip.....ive added a bunch of ns's and it still doesnt see the wan(even if i use actual ip #'s instead of hostnames) i guess ill just have to use dhcp still
<14> anyone suggest where to get help on phpMyAdmin install?
<14> suse 9.2 pro
<8> goodnight and help for your help.
<15> Hi guys, I'm having trouble booting SuSE. When I try to boot it normally, it displays about 7 lines of text and the screen goes black. I can boot to "safe mode" and startx from there. A wiki suggests that I have a misconfigured X. I made proper adjustments in sax2 to get startx working, but it still won't boot in normal mode. Any ideas?
<6> whelp: where exactly does it freeze? did it work before and stopped working?
<15> It did not work before. When I select SuSE 10 from Grub, it starts booting (displays about 7 lines of text), then the screen goes black.
<6> what's the last line of text? .. you don't have time to make it out?
<15> It goes by very fast.. do you know of a way I can freeze the text so I can read it?
<6> whelp: maybe it's logged somewhere.. not really sure.. is it a laptop or other peculiar hardware?
<15> yeah, it's a toshiba satellite A75-s206 laptop
<15> Looks like the 2nd to last line includes /boot/initrd
<16> Hey guys. I'm curious. How often does OpenSuSE release new distributions?
<15> (before it goes black)
<6> Psi-Jack: every 6 months
<16> Every 6 months? Just like the ubuntu guys do, eh? Cool.
<17> april 6th is 6months after 10.0
<6> whelp: must be some hardware issue.. some hw that isn't probed in failsafe-mode
<15> When I make changes with sax2 and click "save", it says the changes will take effect when I restart the graphics system. Does it forget the changes when I reboot the hardware?
<6> whelp: can't be xorg.conf that early
<15> oh yeah, is there a way to boot into run level 3?
<6> Psi-Jack: SuSE came out 6-monthly way before anybody ever thought about Ubuntu..
<18> cb400f: how do you update every six months? do you have to burn another cd, or can you do the equivalent of a dist-upgrade?
<16> cb400f: Heh. Well, I haven't looked much at SuSE in general for many many... /MANY/ years.
<6> Hobbsee: only safe way is fresh install
<18> can you do it another way?
<18> but yeah, only safe way ever is a fresh install - i learned that one the hard way lol
<16> Hmmm.
<16> Upgrading distribution versions is still a pain in the arse? :/
<17> no its easy, but most of dont recommend doing it
<17> fresh is always better
<16> Fresh is /never/ better.
<18> yes, but how do you do it? hypothetically
<16> I mean, if I wanted to "freshly install" a new version of the entire operating system, I'd friggen use Windows. :/
<19> 'fresh windows install' is an oxy moron
<15> lol
<16> celerex: Exactly.
<20> !Dns
<3> Rumour has it Dns is slow
<20> !Bind
<18> !help
<3> Hobbsee: Sorry, the output is too long! Private messaging it to you!
<6> Psi-Jack: can't have a heavily developed distro and a safe way to distupgrade..
<20> !help
<3> storm: Sorry, the output is too long! Private messaging it to you!
<20> !Dns server
<20> !dns
<3> Rumour has it dns is slow
<19> i know i should be asking in openSUSE and i have, but anyone gotten XGL running using Nvidia cards? I keep getting 'GLXBadDrawbale'
<20> is there a command for susehelp for dns?
<19> i have followed pretty much every guide i can find, ensuring DIR and GLCore are disabled, and GLXWithComposite is set to no..
<6> celerex: do the guides say set glxwithcomposite to "no"?
<19> pretty much everyone of them yeah, there was one that didn't but i can't find it
<19> it also has no affect, i get the same thing
<21> Howdy, folks!
<22> hey
Return to
#suse
or
Go to some related
logs:
ubuntu flashplayer-nonfree amd64
Couldn't find package flash
dreamhost magic quotes gpc
redhat es 4 user crontab
tightvnc kororaa vncserver
#perl
making non-thread safe xs
#php
#linux
#gcc
|
|
