| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
Comments:
<0> kommerck> thanks as always ;)
<1> what's a "GUI proxy" ?
<1> well freenx is a proxy for X stuff but probably not what you meant
<0> ok, i'll check it
<2> damnit, I don't remember my novell bugzilla info
<3> ok ok .... here is what it says to me ..... the root partition in /etc/fstab has an invalid root device.
<4> I ***ume you want a http proxy with a gui for configuration
<1> XATRIX: what exactly do you want?
<3> it is currently mounted as /dev/hda6 bud listed as /dev/hda7
<3> how can I fix it ?
<0> i need just a proxy sever.....but with GUI interface, for simple configuration...
<5> oops
<5> http://oops-cache.org/
<4> Keine Verbindung zu Rechner oops-cache.org.
<6> Unit: change the root= option in /boot/grub/menu.lst? What have you been doing?
<6> deleted some partitions you had? It simply dont do that by itself
<2> ****ing novell
<7> Hello!
<3> yes I removed some windows partitions for room
<3> now my linux is screwd
<7> I have installed hplip and the docs tell me to use hp-info, yet there is no hp-info
<6> Unit: heh. Well, its a matter of fixing fstab, grub.. shuold be fine, then
<3> how do you fix fstab ?
<8> i ssh'd into my SUSE Machine which turns off the monitor when it booted xwin... so i try to run xconfig through ssh and it says command not found
<8> any ideas/
<3> I can boot to the repair console
<9> is he using grub or lilo?
<6> edit it to reflect the new partitions
<2> ok, so but 164164 is my issue
<6> BadMagic: Id be surprised if the answers is lilo
<2> which is a duplicate of 162232
<3> fstab --config under repair console ?
<6> frb: which is a sles bug/?
<2> which is a dupe of 159378
<10> ThinkL00p: Via ssh, as root, run: rcxdm stop which should kill your X.
<9> madferret: true... hehehe, but still see the LILO message from YOU on kernel update, some some folks must still use.... hehehe
<2> whih don't have permission to view
<6> frb: which is a sles bug/?
<10> ThinkL00p: Naturally you could do that with ctrl+alt+f1 -> login as root from the box itself.
<6> hehe
<2> how is it a friggin sles bug?
<2> it's 10.1's Network Manager ****ing up
<10> !beta
<11> If you want a stable machine that is easy to setup and relatively problem free, DO NOT use a beta OS! If you are VERY comfortable with Linux/SuSE and wish to help the developers by submitting bug reports, don't mind instability, and understand that many features may not work correctly or at all, then go for it. For support post on the opensuse-factory mailing list
<12> lol
<6> frb: sles bugs are private
<6> Unit: more like vi /mnt/etc/fstab, in rescue
<2> I should call one of my friends in upper management at Novell
<8> daPhoenix: once I Kill rcxdm how do i get into the xconfig.. it still saying 'xconfig' command not found
<6> considering you moutned your root partition in /mnt
<6> ThinkL00p: the X configurator command is sax2
<2> I wonder if Nat is still there
<6> frb: he is, alst time I heard
<6> about brainshare, I think
<6> is that good or bad heh
<2> well, miguel is a spaz and wouldn't get anything done. Nat was always good at getting **** done
<9> you may be able to install xconfig (used to if you wanted it, way back when ?8.x?), but wouldn't guarentee the result. Is old, old, old.
<10> ThinkL00p: Naturally, running sax2 would only make sense - from the machine itself. not via ssh.
<8> daPhoenix yeah but when i run sax2 from the machine, the monitor goes blank when it stats to load
<10> ThinkL00p: What combination of gfx card and monitor do you have?
<3> FSTAAAAAAAAAAAAAAAAAAAB STAB STAB STAB..... I think I got it
<3> I had to stab it in /etc/
<9> ThinkLOOp: does it ever come back? I thought sax2 will come back to console if you dont give it any attention. Like if it defaulted to resolution too high for card, but I might be thinking of the 'test' phase.
<8> daPhoenix : i got a via onboard gfx card and a BenQ 19" LCD
<2> I hate printers
<9> anyway, look into your logs to see what sax2 failed for
<2> after 11 years, you'd think I'd be able to connect to an smb printer in my sleep
<10> ThinkL00p: You might want to give the sax2 a little parameter, such as sax2 -m 0=vesa to force it to use vesa driver.
<2> but no, I'm still too much of a newb to do that
<10> frb: Is this rhetorical talk again?
<2> daPhoenix: no, actually I do want to connect to the printer at work
<10> :p
<8> well im checking the log in /var/log/SaX.log
<8> if i run sax2 -m 0=vesa it goes to "start up" then just sit there
<8> is there a way to modify the config file that sax uses from pico?
<6> ThinkL00p: what about sax2 -l ?
<2> damnit all to hell
<2> I managed to connect to the printer now
<2> but it says "Unsupported Personality: PCL"
<8> madferret: it just says sax2: startup
<8> and hangs up there
<8> hasn't done anything
<9> ThinkLOOp: on my machine /etc/XF86Config links to /etc/Xorg.conf
<9> and I think that is what Sax2 takes as base
<6> ThinkL00p: did you make any changes or have a corrupted X conf file? That could cause sax2 to hang
<8> i haven't changed nothing since it tried to boot after the installation
<9> Sax2 always asks if you want to use the new detected settings. I wonder if there is a switch to Sax2 that tells it only to use what is there, but let you change it once it starts (avoiding the auto-detect)
<8> i don't have /etc/XF86config, just /etc/XFree86
<6> ThinkL00p: what suse version are you using?
<8> just installed 10.0
<6> thats odd, I dont think 10.0 has any file with xfree in the name
<8> ah i found XF64config
<8> er 86
<8> its in /etc/X11/
<10> Erm.. 10.0 doesn't use XF, it uses Xorg.
<6> ThinkL00p: do a "mv /etc/X11/xorg.conf /etc/X11/xorg.conf.disabled" and run sax2 again
<10> And as such, the configuration file should be /etc/X11/xorg.conf*
<6> ThinkL00p: you did some sort of update from previous versions?
<8> there is a xorg.conf file there
<8> i did the update during the installation
<8> do i modify xorg.conf?
<9> oops, sorry, above was /etc/X11/* hehe
<10> What he wants to know, did you have 8.x or 9.x series SUSE installed that you upgraded?
<8> nope
<8> 'fresh install
<9> what does startx do? what does it complain about when starting?
<9> same problem will exist for sax2
<9> if bad conf file
<9> what is that utility that checks conf files for problems?
<8> it says stuff about fatal server error
<8> server is already active for display 0
<9> yep, what is the error?
<9> no screens found?
<2> BadMagic: what conf file?
<9> xorg.conf
<2> dunno, I just run X, and it bitches aobut errors :)
<8> so what should I do?
<8> mv xorg.conf xorg.conf.disabled/
<8> ?
<9> last time I used was for xfree, but saw it being used recently (from sax2?)
<9> wjat was tje fata; server error?
<8> the error was server is already active for display 0
<9> ooooooh, interesting.....
<9> vncserver?
<8> no?
<9> remote admin?
<8> nope
<9> ps -ef | grep X ?
<9> ps -ef | grep -c vnc ?
<8> THere's stuff that came up for x
<8> for the vnc only thing come back is a
<8> *1
<9> for Sax2, you are in runlevel 3, yes?
<8> how would i know if im in level 3?
<8> or sorry, how would i change to level 3
<9> runlevel
<9> or init 3
<9> [runlevel] command
<9> [init 3] command
<8> k i typed init 3
<8> now what? sax2 again?
<13> Hm - how can i make a big screen in games for examples Enemy Terrotory? And how can i switch back to linux?
<9> your root, yes? did you see 'runlevel 3 had been reached'?
<8> nope
<8> when i did runlevel 3 i got linux:/etc/X11 # runlevel 3
<8> unknown
<8> root 7630 1 0 12:54 tty1 00:00:00 /usr/X11R6/bin/fvwm2 -f /usr/X11R6/share/fvwm/fvwmrc.sax
Return to
#suse
or
Go to some related
logs:
#gimp
#xorg
Search gianluigibuffon
#mysql
irc osdev logs
1337 The security ID structure is invalid. ERROR_INVALID_SID
configobject +python
limewire.rpm FC5
sdl rotate surface
perl store file handles
|
|