| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
Comments:
<0> I made a permanent link to a network drive but everytime I open it's asking me for my User/pasword is there a way to make it mount every time without having to use input user&p***wd
<1> they'll screw you completely, you always have to ring bank and get them to cancel payment before they are reasonable
<2> is there a channel for OOo ?
<3> #openoffice.org
<2> got it
<4> hi guys
<4> im in trouble with a scsi controler
<5> hi
<4> i would like to know how i can force a detection of hardware
<5> do u see it in dmesg ?
<4> i dont really see it there
<4> i see a scsi stuff, but it seems like a generic one from my motherboard
<5> than I would say the problem might be in the card itself
<4> which has nothing to do with my controler
<4> lsmod say this stuff
<4> scsi_mod 131304 2 libata,sd_mod
<4> i dont know if it has sthg to do with my controler
<5> first, take it out and clean the contacts and slot with alcohol. than , if needed , check the card on another PC.
<4> the card is working as the light is on
<6> its a pci card?
<4> yes
<5> if the hardware is not detected at boot , than there is nothing there as far as the OS is concerned
<6> lspci -v -v
<6> or hwinfo --pci
<4> ouch it give so much
<4> are u sure i copy that
<6> lspci -v
<6> no
<6> !paste
<7> Please don.t paste in the channel, visit http://paste.lisp.org/new/svn or http://phpfi.com/paste/ or http://rafb.net/paste/ or http://sourcepost.sytes.net/ or http://pastebin.com/ or http://pastebin.ca/ instead.
<4> so what should i look inside that
<5> SCSI
<8> i tryed suse 10.1 ! and i will not change it for my 9.3 !!!!
<6> there should be a listing for the scsi card
<5> *SCSI*
<4> 00:0c.0 SCSI storage controller: Advanced System Products, Inc ABP940-U / ABP960-U (rev 03)
<4> Subsystem: Advanced System Products, Inc ASC1300 SCSI Adapter
<4> Flags: bus master, medium devsel, latency 64, IRQ 10
<4> I/O ports at b400 [size=256]
<4> Memory at fac00000 (32-bit, non-prefetchable) [size=256]
<4> Expansion ROM at fab00000 [disabled] [size=64K]
<4> there is
<4> is that ok ?
<6> !paste
<7> Please don.t paste in the channel, visit http://paste.lisp.org/new/svn or http://phpfi.com/paste/ or http://rafb.net/paste/ or http://sourcepost.sytes.net/ or http://pastebin.com/ or http://pastebin.ca/ instead.
<5> littlesniper: u should have use pastebin.com for that
<4> hmm sorry i never used that before
<4> and i didnt paste the whole thing
<4> just the scsi part
<5> its easy
<4> there shouldnt be any blame for that ;)
<5> anyway , is that your card or the onboard controller ?
<5> u were kicked :)
<4> ive noticed, not good
<9> !paste
<7> Please don.t paste in the channel, visit http://paste.lisp.org/new/svn or http://phpfi.com/paste/ or http://rafb.net/paste/ or http://sourcepost.sytes.net/ or http://pastebin.com/ or http://pastebin.ca/ instead.
<5> is that your card or the onboard controller ?
<4> the thing is that I cant get what product it says it is
<4> do u have an idea
<4> there is no real mention of a name
<4> shall i paste it again :D
<5> littlesniper: Advanced System Products, Inc ABP940-U / ABP960-U (rev 03)
<10> littlesniper: the name on the box is made up by some marketing chap in a suit :) he'll put the same name on two vastly different products just because "the name is nice"
<11> you don't need a name, you need the chipset
<11> just because you have an Adaptec 2940 doesn't mean anything
<10> littlesniper: thankfully, the name is useless to everyone except that marketing chap in the suit :) the chipset is far more useful.
<4> true
<11> I rembmer dealing with 12 distinct cards that all said 2940 on the box
<4> i dont think an asus a8v has an internal scsi controler :D
<4> so it must be my controler right ?
<10> frb-work: nice
<6> i don't see any advansys drivers in my modules dir
<11> wow
<11> SUSE-Linux-10.1-GM-i386-CD1.iso 29% 208MB 9.8MB/s 00:49 ETA
<5> seems so. to be certain , go to the mobo page on asus site
<11> 100MBit at its finest
<10> frb-work: niiiice :) i'm jealous
<5> rrr... 100k here
<4> ive opened my PC and its indeed an ASB controler
<11> 100MBit full duplex switched network
<11> it's my baby :)
<4> so why i cant fdisk /sda or sthg like that
<6> does dmesg show your devices?
<4> no i cant see any /sdx
<4> :S
<5> littlesniper: its the chip on the card. i suggest you take it out, and write down every thing typed on it. on chips, on card etc. so next time u won't have to open the Case.
<11> it's /dev/sdX
<6> dmesg | grep scsi
<12> Can I ask what is the difference between suse and opensuse
<11> !notopensuse
<7> "openSUSE" is the name of the community project (wiki, mailing-lists, IRC room, etc...) - the distribution itself is called "SUSE Linux"
<4> hm when i grep i got two lines saying "scsi0 : sata_via"
<12> and is it partt of novel suse?
<5> littlesniper: VIA is most likely the OB chip
<12> its other version
<10> littlesniper: "/sda" or "/dev/sda" ? do you have any devices in /dev/disk/by-id/ that look right/
<4> i dont see any relationship between sata and scsi, and by the way there is a via chip on my mb
<4> which has nothing to do with scsi
<11> sata drives appear as scsi devices in the linux disk subsystem
<5> but with SATA RAID , right ?
<4> i dont have any /dev/sdxxxx
<11> as do USB devices
<13> how to create installable dvd iso from the 5 cd set (open suse 10.1)
<11> !makesusedvd
<7> nstructions for making a dvd from CD ISO's are here:- [ http://en.opensuse.org/Making_a_DVD_from_CDs ] You can find the most recent version of the makeSUSEdvd utility here [ http://sourceforge.net/project/showfiles.php?group_id=146800&package_id=163319 ]
<4> yea sata raid, but disable on my bios if i remind well cos i dont ise sata for now
<4> sarnold: i cant see any /dev/sdxxx
<4> sounds bad
<10> littlesniper: how about /dev/disk/by-id?
<6> cat /proc/scsi/scsi
<4> but my hdd is working on my sampler so i guess it should work here
<5> littlesniper: its your punishment for playing CS too much
<4> sarnold: i see only my other disks
<10> littlesniper: hrm :/
<4> Ancient1: no its maybe my punishment for playing dota on warcraft too much, or even Tower defences
<4> sarnold: yes i saw /dev/hrm
<3> not to mention the pr0n
<4> no **** its /dev/shm
<14> hi guys
<4> starts to get out of my nevers
<5> littlesniper: u need to correctly identify the card. than you could search with google
<4> (scratch)
<14> whats the most used webmail today? whats default for suse?
<6> squirrelmail is whats in suse
<4> Ancient1: didnt i provide the chip stuffs ? is that sufficient to find out ? and in anycase what should i look for on the net
<3> fuji: I think gmail
<6> littlesniper: repost it on pastebin
<14> hahaha
<14> good good
<4> !paste
<7> Please don.t paste in the channel, visit http://paste.lisp.org/new/svn or http://phpfi.com/paste/ or http://rafb.net/paste/ or http://sourcepost.sytes.net/ or http://pastebin.com/ or http://pastebin.ca/ instead.
<6> i think thats a really old controller
<4> let me try to paste :)
<6> perhaps its not supported anymore
<5> littlesniper: as frb told u, there are many cards by same/similar name. its basiaclly the chip on the card , and REV data that is importnat
<15> hey all..
<4> yes it is an old one cos its for ultrawide
<14> IMP, squire....what webmail software you guys think are best today?
<11> fuji: openwebmail
<4> can u see my paste ?
<15> having a heck of a time getting SLES 9 RC3 to install on a Dell 1850, wondering if anyone else has done this and wouldnt mind helping... I get to the point where the installer wants to mount the CD and cant
<5> littlesniper: once u know the card, u can search for solution ppl found for this same card
<15> fuji, definatley openwebmail
<14> kk
<14> really thanks guys
<4> did it work the paste thing on pastebin ?
<14> I will try openwebmail
<6> xnyx: openwebmail comes with suse?
<11> littlesniper: you have to post the url that it told you when you were done
<3> finally someone that agrees with me that openwebmail is the bomb
<6> does openwebmail support maildirs yet?
Return to
#suse
or
Go to some related
logs:
#ati
iotop linux
#fedora
hing fudges
meatmanek
debian fstab umask
IDEACPI
dpkg -i dependncies unstable
jmax build dapper
installed ut2004 in ubuntu,how to run
|
|