| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8
Comments:
<0> hello
<1> hi all
<2> hey cbrake & eFfeM
<3> koen: There isn't any patch I'd trust
<0> zwelch: so you got your bbcl*** to work :-)
<2> RP_: I see
<4> i really dont think cpufreq is sufficient, especially after messing with omap's
<2> kergoth: cpufreq + dyntick would make a nice combo
<5> is there any experience of angstrom working in akitas?
<5> last time I tried it was freezing pretty bad
<1> ~change hkd 61 to eur
<6> that doesn't look right
<7> ~change 61 hkd to eur
<6> 61.00 Dollar (HKD) makes 6.15700 Euro (EUR) (from http://www.xe.com/)
<1> yeah, figured that out
<1> NAbyss, tnx
<7> np
<1> got my mp3 player from ebay, paid eur 14 s&h it had hkd 61 on it, was curious on how much that actually was
<1> ~change 31.30 hkd to eur
<6> 31.30 Dollar (HKD) makes 3.15921 Euro (EUR) (from http://www.xe.com/)
<1> misread teh stamkps
<2> pH5: busybox 1.2.0 seems to work with eabi
<8> koen: finally booted something?
<5> oz 3.5.4.1 has been released but I only update to rc4, what's wrong?
<2> hrw|work: yep, on my c700
<8> katossi_uni: ?
<5> ok maybe I should try deleting all the temps
<9> koen: cool. so no need for coreutils anymore?
<2> pH5: it does freeze just after syslog, but that might be due to angstrom-bootstrap-image not shipping some stuff
<2> pH5: but editing the udev script to run busybox works
<2> pH5: no weird errors
<2> pH5: I have to note that this is an armv4t rootfs
<5> hrw|work: what I meant is I pulled the sources from .oz354 but I could only see rc4 stuff
<8> katossi_uni: http://www.openembedded.org/repo/org.openembedded.oz354x/conf/distro/openzaurus-3.5.4.1.conf say 3.5.4.1
<5> nops
<5> it says rc4
<5> damn
<5> but I'm doing the pull and update!
<10> Anyone here using distcc with OE? Is it troublefree?
<8> inherit += "distcc"?
<11> Laibsch: try icecream
<11> Laibsch: no it is not troublefree, you have no influence about which toolchain the other clients are using
<10> hrw|work: despite zecke's warning (which I will investigate), would it be as easy as that simple line to activate distcc for openembedded?
<8> Laibsch: dont know - I have one machine only
<10> hrw|work: you could throw in you zaurii ;-)
<10> your
<8> Laibsch: all 4 ones?
<10> yes, don't be shy ;-)
<11> hrw|work: try OpenMosix on them :}
<10> You will have enormous computing power.
<10> zecke: Interesting project indeed.
<11> is it still around?
<10> zecke: Actually one that I was considering when first trying out OE. and you still needed 1+G of RAM which I did not have.
<11> Laibsch: trust me, you want icecream not distcc
<11> everybody loves icecream
<10> but OE will not run in parallel on openmosix since it is just a single thread.
<10> zecke: I trust you.
<11> Laibsch: RP will break the barrier soon (soon as in Free Software 'soon')
<10> zecke: what barrier?
<10> the single-thread one?
<1> i see some bb files that have a DEPENDS on eg libxml2, shouldn't that be libxml2-dev ?
<11> Laibsch: yes, the single threaded one
<8> eFfeM: no
<8> eFfeM: libxml2 is recipe PN, libxml2-dev is result of build
<10> zecke: Do you use icecc with OE? What Desktop distro?
<10> Docs are more than sketchy for it on ubuntu.
<11> Laibsch: I used to use it
<10> Why did you abandon it?
<11> Laibsch: but that was was at my internship where we had more than one computer
<10> Everybody just single computer here, eh?
<11> Laibsch: we either live in more poor countries, or are just poor
<10> I have lots of old one lying around. And one main desktop/server and laptop. The latter are the only powerful ones by todays standard and the ones I use regularly.
<12> i have loads of computers, just old and not connected by a lan :(
<2> only my server is not >5 years old
<2> but that's because the mobo died 3 years ago
<2> all the other x86 crap is pretty old
<10> zecke: Well, for me it it the other way round. I stopped buying new computer a while ago but took the computers from my relatives who screwed up their Windows system on it and thought a new computer would be the cure-all
<11> hehe
<8> ;))
<11> Laibsch: well, I wouldn't be able to pay the power bill for old computers...
<8> my machine is ~3 years old: athlonxp2200+, 1G ram, 120G hdd
<10> zecke: I would not want the power-bill for today's computer.s
<12> i was offered a MIPS beast, was well up for it, but then i found i needed 3-phase power for it :(
<2> ade|desk: a friend of mine used his onyx as a space heater in the winter
<12> hehe
<8> koen: ;D
<12> thats small fry
<12> this one was r4k but just had hundreads of the things
<10> zecke: power consumption per CPU horsepower has been pretty stable, Google complained lately.
<10> Thus faster computers waste more unless utilized for 100% all the time.
<2> get a T1 :)
<10> What for? To compile more?
<10> /me not trying to set a compile record here, just get stuff done ;-)
<1> hrw|work don't understand the -dev part completely, especially when working native I need to have the headers installed (but if I have a pacakge that does not cross compile, I still would like to use cross-compiled packages from other versions
<12> Laibsch: i thought that new servers reduced clock cycles if not needed, least HP Proliant ones do
<10> zecke: back to icecc. What did you do to make OE use it? I guess just inherit will not be sufficient, will it?
<13> YES at last. I have gotten the keyboard working in the HTC Universal right out of OE
<11> Laibsch: I have not used it in a while, it could be a bit rotted
<11> Laibsch: but INHERIT += "icecc" should do
<8> eFfeM: OE/bitbake know that "libxml2" exist. they do not know that result will be 'libxml2-dev' (depends on version of oe/bitbake)
<10> Wow, OE is absolutely incredible, unbelievable.
<13> zecke and hrw : cool right? finaly
<11> goxboxlive: awesome :)
<1> hrw|work, to make it more difficult: there is meta/slugos-native.bb which aims at installing a complete native toolchain, had to add DEPENDS=libc6-dev to get crt1.o in (and libc6 is from glibc)
<2> can we rename that to meta/build-essential.bb ?
<8> eFfeM: it should work with DEPENDS="glibc" RDEPENDS="libc6-dev" iirc
<8> koen: NO!
<8> koen: openslug-native has tooo much stuff inside to be called 'build-essential'
<8> koen: Depends: libc6-dev | libc-dev, gcc (>= 4:4.0.2-2), g++ (>= 4:4.0.2-2), make, dpkg-dev (>= 1.13.5)
<8> thats build-essential from debian
<1> i'd rather leave it to rwhitby and koen to decide would be happy if there is a build-essential.bb that I could include
<8> how to kill gvim: gvimdiff dump.sql dump2.sql (49k and 57k lines)
<14> can someone help me out with dropbear?
<7> gandhijee: Anything in particular?
<14> yeah i can't seem to login
<14> is get this
<14> authpriv.info dropbear[204]: Child connection from 192.168.1.2:20858
<14> authpriv.warn dropbear[204]: login attempt for nonexistent user from 192.168.1.2:20858
<14> but i am login in as root w/ p***wd
<7> Hmm. Are you doing ssh root@device-ip?
<14> i am using putty
<7> Try it from the device itself.. ssh root@localhost
<14> so when i get there it ask for my user name
<14> one sec, i have to build dbclient
<14> ls
<14> do i have to setup another file with authorized IPs?
<15> mickeyl org.oe.dev * ra853b21c... /packages/pulseaudio/pulseaudio_0.9.2.bb: pulseaudio 0.9.2 improve packaging
<7> gandhijee: Not AFAIK
<14> dbclient: connection to root@127.0.0.1:22 exited: Failed to get homedir
<14> one sec
<14> i have to fix somethings
<14> umm
<14> i can't even ping localhost...
<14> it doesn't pull that info from my hosts file.
<7> Try just using the IP
<14> yeah i did that
<14> dbclient: connection to root@127.0.0.1:22 exited: Failed to get homedir
<15> mickeyl org.oe.dev * r24a04... /packages/libsndfile/ (libsndfile1_1.0.11.bb libsndfile1_1.0.16.bb): libsndfile 1.0.11 -> 1.0.16
<7> Hmm.
<7> Make sure root's ~ is set correctly?
<14> i have it set as the / dir
<7> What happens if you login as root.. what's pwd?
<14> "/"
<14> do i have to set a $HOME var?
<14> my embedded systems book doesn't really go in to too much detail
<7> That should be set by the login process, not your login script
<7> i.e. ssd
<7> er, sshd
<14> i don't have a login scipt
<7> Yeah, that shouldn't matter
Return to
#oe
or
Go to some related
logs:
#centos
#ubuntu
Failed to load shadow images ubuntu
#ubuntu
#lisp
#math
#perl
akcom hdd record
Tonglebeak
gnometorrent ports
|
|