| |
| |
| |
|
Page: 1 2
Comments:
<0> hi =)
<0> can somebo
<0> dydy give me hint with twinview ? I'm trying to run games on one display only .... but with the meta modes: "1280x1024,1280x1024; 1024x768,1024x768; 1280x1024, NULL" the screen seems to be centered between the two displays ...
<1> Thunderbird: just found sth. interesting: "Most CRTs that are 100Hz capable will only convert an interlaced signal to 100Hz. When you feed it a progressive signal the 100Hz feature gets disabled. Probably not enough on-board processing power to handle twice the signal rate and do 100Hz processing at the same time."
<1> http://www.hifi-writer.com/he/progscan/progscan.htm
<2> I already feared it was done like that
<1> this article was interesting.. I'll try the HD576i with the 100Hz PAL converter (;
<2> HD576i is just PAL
<1> yes, seems like this is exactly what this TV wants as its input signal.. then double the refresh rate. i was unsure about this.. will this also set the resolution to PAL? I always wondered howto get this done.. always used PAL as the TVStandard and set the res to 800x600 :-/
<2> 800x600 should be 'fine'
<1> hopefully this works with the tvout chip on my old geforce 4 ti 4600
<2> combine it with that stretching trick
<2> note that not all of the image will be rendered due to overscanning
<2> the easiest way to explain overscanning is through this image 'http://tvtool.info/jpgs/oc.jpg'
<2> basicly as a sort of hack a 'big' image is sent to a TV
<2> and only a portion of it is diplayed
<1> i set the nvidia driver side to overscanning of 0.0 because this tv has some nice zoom options that can crop of black borders without doing the overscan on the pc side
<2> I think they weren't able to make the 'same' tubes for each TV
<2> ('big' non-widescreen TVs are closer to 5:3 than 4:3 while small non-widescreen TVs are real 4:3 and look 'square')
<2> ah, nice
<1> this beast can zoom and even move the image to the top/bottom/left/right, much like on a pc monitor osd
<1> thanks for your help.. i'll go to sleep now
<0> anybody using twinview here ? =)
<3> anyone know where I can get help with the windows nvidia drivers?
<4> hello i'aan french
<5> heh
<3> what's the biggest screen res the nvidia drivers will do in linux?
<3> n/m found it
<6> so guys, what do you think is better at this time for 2d the latest xorg nv driver or an older nvidia driver for geforce2mx?
<7> does it matter?
<7> but if you don't need 3d just use nv imo
<6> renders just as good graphics in 2d you think, jetscreamer?
<7> i myself don't recall any difference
<7> try em both
<6> ok thnx but i'll stick with nv, does nvidia work on nv at all btw?
<6> but might install quake2 sometimes :D
<6> then will need 3d opengl graphics :D
<7> huh? "does nvidia work on nv at all"
<7> if you use the nv driver you get software opengl ... aka 10fps
<7> if that's what you mean
<6> no what i mean does nvidia contribute to the nv driver in any way
<7> i don't know
<6> thnx
<8> io
<8> anyone has a minimal shader 3.0 exemple runing under linux ?
<9> hello all
<9> i have a problem with my the latest driver of nvidia and xorg 7.0.22 on debian etch
<9> x server crash without any errors
<10> hi!
<10> I run Debian Etch and just upgraded to xorg 7.0 & nvidia 1.0-8762. Starting X tells me modules glx and nvidia cannot be found.. has someone an idea on how to solve this?
<11> dieeasy: What does "pkg-config --variable=moduledir xorg-server" tell you?
<12> how do i know what version of the nvidia module/driver i have?
<10> AaronP: it tells me nothing..
<11> dieeasy: You probably need to install a "devel" or "sdk" package for X.org 7.0.
<11> xorg-server-devel, maybe.
<11> http://nvnews.net/vbulletin/showthread.php?t=72490
<10> xserver-xorg-dev could be it?
<11> Yeah, that's it. Then reinstall the driver.
<10> ok, many thanks!
<10> AaronP: yes, it just worked, thanks for help and the link!!
<11> Glad to help
<13> I cannot get xorg 3.5.2 to load the glx or nvidia modules. Driver version 8762 (worked fine on older xorg) any ideas?
<13> Tells me : (EE) Failed to load module "glx" (a required submodule could not be loaded, 0)
<13> ls -al /usr/lib/xorg/modules/extensions/libglx.so
<13> -rw-r--r-- 1 root root 431292 2006-07-13 19:24 /usr/lib/xorg/modules/extensions/libglx.so
<13> I mean xorg 7 :)
<14> i'm running debian unstable, and i installed the debian nvidia drivers, i have since noticed that my card lacks some functionality and is unable to play games it use to run
<14> i use to use the nvidia drivers on the nvidia website, however those no longer run on my system for some reason
<14> can anyone tell me how to get that funstionality back?
<14> *functionality
<15> check your logs, make sure GL works, etc
<14> GL works, there are just some things that do not come up
<14> functions that don't seem to work anymore
<14> do you need an example?
<14> http://sh.nu/p/2618
<14> those are just a few things that don't work anymore :(
<15> what does glxinfo report?
<16> anyone here to help with nvidia install questions?
<14> http://sh.nu/p/2619
<14> that's my glxinfo output
<14> Primer, i can't make heads or tales of that output..can you tell me whats going on?
<15> I don't program GL...I mostly know about runtime issues...sorry
<15> my glxinfo output is a bit different
<14> s'ok
<15> direct rendering: no <-- yours
<14> how do i enable direct rendering?
<15> not sure if that would affect what you're doing
<17> hi. i bought a gf 5200 and it seems its real crap what would you recommend
<15> you're right
<15> 5200's are crap
<17> well you can cook an that chip
<14> buy a 7900
<11> bluefox83: Your OpenGL library isn't properly installed. You have Mesa libGL instead of NVIDIA libGL.
<11> I would suggest reinstalling the driver.
<14> AaronP, ty
<2> aep: what type of system are you using? (cpu, agp/pci-express, ..)
<15> AaronP: heh, good catch, I just now noticed that
<15> even though I inspected the first and last vendor
<15> but not the middle one
<17> Thunderbird: agp
<17> i kust want to play a bit, no heavy things
<2> and how fast is your CPU?
<17> 2Ghz
<2> is it an athlon xp or a p4?
<2> (it matters a lot not all CPUs use real MHz)
<17> p4
<2> get a simple geforce6600
<17> expensive
<2> what's your budget?
<17> it needs 50Watt, dude!
<17> about 60$ / is ok
<2> you asked for more performance
<2> it is basicly the next upgrade after a 5200 these days
<17> i found "ASUS N6600LE/TD128, GeForce 6600LE, 128MB DDR, DVI, TV-out, AGP (90-C1VGK0-HUAY)" for 70 is that ok?
<2> a 6200 is good too but most models these days are 64bit; those aren't that much faster than a 5200
<14> 5500 oc is nice...
<17> i see
<2> nah, 5500 is still crap
<2> it is basicly a faster 5200
<2> lets see what the 6600LE is, what they killed about it
<17> well i just ask for a card that dosnt go over 100 degrees :)
<17> (celsius)
<17> i realy can make me a meal on that chip
<2> the 6600LE looks reasonable
<17> is the one i posted ok?
<2> it has a 128bit memory bus, so it is reasonable
<17> the descriptions says its equal to a 6200
<2> I think they disabled some pipelines
<17> ok you say everything with 128bit mem bus is ok?
<2> I guess it is basicly the old 6200 with 128bit memory (those aren't made anymore)
<2> that card is ok, it performs similar to a FX5900
<17> thanks mate :)
<2> (depending on the clocks)
<2> I can't predict how much faster it will be than your fx5200 though
<14> ok i made sure all the mesa drivers are removed..what do i do to make sure that the nvidia ones are installed right? do i need to restart X?
<2> but I think your fx5200 has 64bit memory (most models have) ..
<17> i think it has, it is 20 on ebay
<17> i payd 40 :
<17> :(
<17> and its not much faster then my gf4MX
<7> i was very please with going from an fx5200 to a 6600gt if that helps :)
<18> hi all!
<17> :)
<18> I've a problem with nvidia drivers, I use debian, and I downloaded and installed nvidia legacy drivers (for Nvidia Tnt2) and I changed Driver "nv" with "nvidia", Load "glx" and remove Load "dri", but when I try to start X, show me error that say Can't load nvidia driver, what's wrong? :(
<17> sepho: for sure there's more then this error
<14> how do i get my video card to pickup the drivers i installed?
<7> ?
<7> i don't htink it works like that
<17> bluefox83: video carsd do not need firmware
<17> you load that driver into your kernel
<14> ah, so i restart X ?
Return to
#nvidia
or
Go to some related
logs:
intelfb LCD gentoo
Yhyko
enuwi-g problems
change background another div rollover
vim put column
#math
#perl
msse3 turion
kororaa error tmpfs
#debian
|
|
