| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9
Comments:
<0> the ip is my current one right
<1> the one of the outside
<0> oh you used eth0
<1> networkcard
<0> eth1 in my case
<1> ok
<0> wtf
<0> still not pining outside
<1> ohh btw dns have to work
<1> if if you machine inside doesnt know how google.com ip is
<0> Warning: Could not set up default route via interface
<0> Command ip route replace to default via 192.168.1.2 returned:
<0> . RTNETLINK answers: Network is unreachable
<0> Configuration line: default 192.168.1.2 - -
<0> This needs NOT to be AN ERROR if you set up multiple interfaces.
<0> See man 5 routes how to avoid this warning.
<1> hmm perhas you should remove the other one
<2> gogeta: guess either you never read the topic or the concept of flooding" is new to you.
<3> Are wifi / bluetooth components detachable in Laptops ?
<0> humm
<2> gogeta: whichever it is, pasting > 3 lines = flooding, and the topic says "do not flood! use ..."
<0> sems to be a problem in dchp
<0> heh oops
<2> |lostbyte|: detachable?
<2> u mean the hw?
<4> detachable penis?
<3> spike: Yup !
<0> should the dhcp server beset to eth1 or eth0
<5> gogeta: Whichever one the XBox plugs into.
<0> eth1
<0> so why is it all mesed up
<0> still sees old gateway
<0> humm
<5> What does? The XBox?
<0> yea
<0> what should be default gateway be
<5> If you've changed the DHCP settings, you do need to re-get the DHCP lease. Powering the XBox on and off ought to do it...
<5> The default gateway, if it's an IP address that you're setting on the XBox, should be the router address.
<0> my isps ip?
<0> this is a nat
<5> gogeta: No, it should be the router IP.
<0> no roughter
<5> This is something you're setting on the XBox end, right?
<0> no
<0> pc
<6> what are some good network analyzing tools or apps out there?
<0> the xbox is set to auto
<5> mgg: Ethereal, nmap, ettercap
<7> mgg: nmap, ethereal, iptraf
<6> Orborde: can i give a case scenario
<5> gogeta: The PC should be getting the appropriate info from your ISP by DHCP.
<5> mgg: Go for it
<0> ip fowerding on
<0> on both cards
<6> ok lets say i have a network with several switches, and one of those switches was malfunctioning and it is constantly broadcasting and i wasn't aware of this, is there tools out there that can help me find the problem
<0> no gateway
<7> mgg: ethereal or tcpdump, both are network sniffers
<0> the dns should bemy isps right
<5> gogeta: If this is on the PC, the DNS should be the ISP's...but the PC *should* be able to get the ISP info via DHCP.
<0> setting up the dchp server
<6> yeah i was thinking about ethereal, i just thought there might be something new out there, ok thank you Norky
<5> gogeta: It should work like this: Internet -> ISP -> sends gateway, etc. info to your PC -> PC (router), which runs its OWN DHCP -> sends router info, ***igned NAT'd IP address, and nameserver to -> XBox
<5> overnout: Would the DNS nameserver given to the XBox be the router IP or the ISP-provided IP?
<0> xbox still getting old gateway
<0> and getting last ip in the range
<0> but is responding to my pings with no dns info errrrrrr
<8> gogeta: got a router?
<0> no
<0> its just not gettinga rought
<0> getting packet errors
<0> nv no im not
<5> gnubien: He's using a suse box as a router.
<8> Orborde: ok
<0> and failing
<0> xbox gets ip
<0> but worng gateway sences thers non
<0> and no dns info
<0> gett last ip in range
<0> its responding to my pc but thats it
<9> I just discovered that an important directory disappeared , then noticed that the 3ware RAID is degraded. Is there any possibility that a songle disk failure in a RAID1+0 setup cause data loss ?
<0> getting this working would be great
<5> gogeta: Oh. You need to set the DHCP server to send out your router (PC) IP as the default gateway...
<0> the test shows it sent it
<7> you might find dnsmasq easier to use than the full-blown dhcpd
<6> ramy: there is that chance
<0> err
<0> xbox not getting new gateway
<9> mgg: is there a way to recover the lost data then ?
<9> mgg: and doesn't that cause filesystem corruption too
<8> ramy: which filesystem? ext2 ?
<9> reiserfs
<9> reiserfs3
<6> ramy: I personally wouldn't recommend RAID 10, it's fast but at cases like yours well what can you do, save what you can now i guess. in future look into Raid 6 or 5 sloow but quite good on data loss
<6> gotta go later
<9> hmm, I always thought that RAID10 is more reliable than RAID5 ot RAID6
<9> I don't understand how can RAID5 be better than RAID10 in data loss
<10> or raid 50, if your hardware can do it
<10> ramy : and no, in raid 10 single drive failure shouldn't affect the container integrity
<11> hello
<11> if i have a server inside a network wich dont have any port forward to it, and i want to control that server from outside the network...is there a way for that? wichout touching the firewall/router
<10> xNinja : sure. walk up to that machine, plugin the keyboard. or magic. or mind controll
<11> physically i have full control to the server wich is inside that network but i dont have access to the firewall/router...
<5> xNinja: Tunnelling?
<5> xNinja: What are you doing, anyways? h4x0ring some poor buggers?
<11> i want to get access to my server wich is inside a network wich dont have any portforward to it
<11> but i think that i got it :D ssh -L localport:destinationip:destinationport user@hostname
<5> xNinja: I think that just sends the data on over an SSH tunnel. Is that what you want?
<5> xNinja: For that to work, you still have to be able to TCP (or maybe UDP..not quite sure how SSH works) to the server in the first place.
<11> humm
<5> xNinja: What you may need to do is figure out how to make the inside server phone you instead of the other way around.
<11> i am getting confuse :D let me make a picture of what i want and show u
<5> OK
<5> xNinja: I'm leaving for a bit...I'll be back in a few minutes.
<11> ok tyt i`'ll give the link
<12> When I mkreiserfs on a raid1 pair, if hangs on fsync(), and hangs any other program that uses the disks (even non-RAID partitions). mkreiserfs on a raid1 pair works fine.
<12> Any guesses as to the problem?
<12> sorry - mkreiserfs on *raid0* is what works fine.
<10> blah, he didn't have the patience
<2> stupid stupid stupid, 2 days, asked tons of so called expert and this cisco vpn still doest work...
<4> spike, dont feel bad. i just installed rhes 3 (taroon) on a dell 2850, and it cant detect the onboard nic :p
<2> and it's so annoying when ppl becomes elusive, and start giving random advices just to get u tired and leave
<4> Intel PRO/1000 MT single port Gigabit NIC
<5> xNinja: I return.
<4> is that an eepro, or a e1000
<2> _sho_: e1000
<2> eepro is the 10/100 Intel PRO nic
<11> welcome back Orborde
<11> did u see the picture ?
<13> for starters keep away from dell, i support standard hardware not this pripority comanpys, they lead to headacks. and most on bord stuff is a pain anyways. so i prefer add on pci cards for most things.
<10> bah. all my dell poweredges work just fine
<10> including pe2850's
<10> spike : odd, i have an issue with a cisco vpn client on linux. with our recent change of subnets, it doesn't give us access to all of our lan anymore
<2> ananke: dont know, here I'm using the pix to vpn from a subnet to another, private ips space,and I cant get anywhere
<2> vpn comes up, but then no traffic p***es to the other side
<13> ananke, then your lucky, try upgrading them later and tell me it went without a hitch :)
<10> Romster : i've been upgrading them for years. no hitch
<10> spike : same here, for some of our subnets.
<13> i must get to service the crappy dell pcs then :/
<10> yet it seems to work on windows
<10> Romster : must be. besides pcs are not servers
<2> ananke: ah... oh dear... I would kill someone is that's true...
<2> ananke: what client ver are u using? 4.8.0 ?
<10> 4.6, i can't get 4.7/4.8 to compile properly
<10> [2.6.14.x kernels]
<10> in fact, i had to remove some lines of code from the 4.6 one to compile on the 2.6.14.x, which compiled cleanly on previous kernels
<13> i avoid them personally, i much prefer generic cases and parts.
<13> which vnc server are you using btw?
<14> What does it mean when rsync prints the name of a file preceded by "<f???????"? Search engines haven't been much help because they either ignore that string or turn it into "-F"
<13> i use tightvnc
<10> Romster : generic stuff ****s
<10> eyeris : wrong encoding?
Return to
#linuxhelp
or
Go to some related
logs:
#math
alias_eth0
AlwaysRestartServer
#mysql
flush priviledges ERROR 1064
fsviewer ubuntu icondir
gentoo xorg.conf 666 permission
#css
#physics
ubuntu dr_dos server
|
|