| |
| |
| |
|
Comments:
<0> hello
<0> <ping>
<1> are there issuse with amd64 dual cores and keeping the hwclock accuate?
<2> Hello all. Does the kernel provide any way to have a program running with a CPL of 0 on the intel netburst architecture?
<3> hmm
<4> hi
<4> i have a keyboard problem. A few keys don't generate keycodes, but the suggested setkeycodes doesn't work, it has no effect, dmesg still complains about uknown keys
<4> any ideas?
<3> hmm
<5> mmh
<6> mhm
<5> moin
<3> Lord-Voldemort: has your religious friend come back? :)
<3> hmm
<7> hi, copying from HD to my LG DVD-Ram drive is damn slow, (about 400kb/sec of 2mb/sec) the load rieses up to 10 and my system ****s. when I copy from memory to the drive everything is ok. both drives are on different ide channels.
<3> BSM: yes ide ****s, even fast drives can be slow & the entire cp will be as fast as the slowest part
<3> cping too from ram is always a good idea
<3> then you avoid buffer over/under runs
<3> even scsi too ide or ide too scsi can **** for the same reason
<7> i'll go and check the order of my master/slave dvd-ram/cdrom drive... currently master is at the end
<3> hehe cat7 movie says too stay away from windows
<3> I looked up thinking yeah thats good advice expecting too find redmond or similar hit by the storm
<8> what's a safe way to test out kernel's suspend to disk / ram / and other sleep states? It would seem that the harddrive doesn't get unmounted on power down (I could be wrong about it), and I really don't know how healthy it is to the drive itself.
<8> I can't use knoppix, because I need the latest kernel; so I guess I would need to make my own live cd if I wanted to do major testing =\
<8> also wtf happened... cat state reports only men, and doesn't have standby, or disk... =\
<3> Servo888: no fire here unfortunately
<8> gb, huh?
<8> mem*
<3> Servo888: yes
<8> uhh huh.. Well I still can't figure out why disk and standby don't come up anymore... It has to be something acpi looks for on boot I guess.
<3> Servo888: My guess is user error, replace user
<8> gb, how rude =\
<8> acpi is build into the kernel
<3> Servo888: how so?
<8> built*
<3> noacpi on boot easily disables that
<3> of course you no doubt know that already after rtfm
<8> gb, I'm using almost the same exact config as I used in .3, where I had all the states, while in .4 I don't.
<8> gb, of course I did CHECK that before I started bitching
<8> kernel /gentoo64-2.6.15.4 root=/dev/hda3 vga=791
<3> umm .3 of what?
<8> THat's my boot line.
<8> 2.6.15.3
<3> well you'd be silly for compiling acpi then wouldn't you?
<8> gb, how so?
<3> such things should be a module or not used at all if they are known too cause issues with your hardware
<3> of course you've already rtfm re any issues with your hardware
<3> I personally do not use acpi
<3> but thats because my hardware hates it
<8> well acpi support was 'supported' for my board after 2.6.6. I didn't really take much notice
<3> & it's a regular problem for many
<8> gb, what do you use then?
<8> apm?
<3> Servo888: problem with code being worked on is that it often breaks
<3> yup
<3> or nothing
<3> PIII has nothing at present but my p132 uses apm
<8> yah I don't think there even is apm support for my amd64
<3> both notebooks have issues with acpi
<8> Yah sleep issues with acpi on my notebook. But I still use acpi for battery and temp monitoring
<3> I recommend you cp kernel-source-tree kernel-source-tree-noacpi;edit Makefile with some extra version;reconfigure for no acpi & rebuild
<3> that way you wont need too recompile everything it will basically just relink a kernel at the new config
<3> you can make as many different versions of the same kernel as you like then without impacting on modules in a possibly functioning kernel
<8> hmm not a bad idea
<3> only h***le is, it consumes a large amount of diskspace
<9> good evening
<3> but when you work out which tree works you rm the others
<3> after doing a make clean in each
<3> so it rm's the appropriate /var/lib/modules as well
<3> oops not var
<8> gb, ok thanks for the insight, I'm going to test out a few trees and see how it goes
<10> hi....
<10> precompilated kernel linux-image-2.6.15-1-686 has integrated ipw2200 and support for wpa?. Thx
<5> Yulia: ask #(YOUR_DISTRO)
<5> which i'm guessing would be #debian-es
<11> Hi, trying to cross compil a 2.6.15.4 kernel for arm920T integrator, i get the following error : "LD .tmp_vmlinux1" "arm-softfloat-linux-gnu-ld: no machine record defined"
<11> My toolchain is based on gcc-3.4.1, glibc-2.3.3, binutils-2.15
<12> !c
<8> !c
<8> MMC is the "multi-media card" bus protocol. | if built as a module, what's the module called?
<8> CONFIG_MMC:*
<13> is there any diff between using load alternative config from menu config and make oldconfig?
<14> if you choose make oldconfig is showing the diff from the new kernel.. and you can choose if you wants the new feauters or not
<13> and where is it looking for old config?
<15> .config still
<15> try zcat /proc/config.gz >.config
<16> Is it possible to emulate the plugging of an usb device?
<16> or to turn off the power of a single host controller?
<13> theoddbot: so what diffs could it show?
<13> for me it showed nothing
<15> Peper: then there are no new options
<13> oh i see
<15> Peper: it might ask for new drivers or filesystems that have been added, for example
<13> thnx for info
<17> As Salaam e laikum (means: Peace b upon you) ........... http://www.submission.org/ ........... [112:0] In the name of God, Most Gracious, Most Merciful [112:1] Proclaim, "He is the One and only GOD. [112:2] "The Absolute GOD. [112:3] "Never did He beget. Nor was He begotten. [112:4] "None equals Him."
<18> w t f ?
<5> last time he did that he got k-lined
<18> what is it?
<19> the kernel keeps detecting 882MB or RAM instead of 1024MB that is installed (it says it's 1024 in the BIOS, FYI)
<19> how can i fix this?
<19> gah
<18> how many swap do you have?
<18> *haw large swap partiotion
Return to
#kernel
or
Go to some related
logs:
perl geolcation module
insmod operation not permitted anaconda fedora
kbuildsycoca is unable to register with DCOP
#oe
bkvjegy
#gentoo
Link-Joey
#perl
load_state:1250 cannot find soundcard
undefined reference to `vtable for wxFileProto'
|
|