| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53
Comments:
<0> im going to build my own pc sometime down the line and its only ging to have the best **** in it
<1> kurai: language.
<2> Is there anyway I can verify that I don't have HW/SW mixing?
<0> $500 graphics card, 3x500GB hdd :P
<0> blackace my bad
<2> kurai, Best gaming card is $600 ;]
<3> I used to use in kernel stuff, but lately I moved over to alsa-driver (had missmatch problems)
<4> kurai: i'm pretty happy with a G3 450 ;)
<5> the multicore cpu's are kinda interesting
<0> G3 isn't that a mac pc?
<4> yup
<2> Lol, well is there anyway I could verify/check SW/HW mixing?
<6> kurai: may as well get two Geforce 7900 cards while you're at it.
<4> 1999 era
<0> why 2?
<5> MidnighToker: you running gentoo on a mac?
<2> 7900GTX 512mb in SLI = $1200
<6> kurai: SLI. of course.
<7> macs rule... i require a macbook pro... now
<8> Azoff, is alsa-driver better?
<0> SLI?
<3> Introvert: I think you could try using no soundserver and then play something in 2 (or more) players at the same time
<6> kurai: yes.
<2> Scalable link interface
<0> *shrugs*
<4> VAXinate: actually, the OSX kernel is REALLY slow compared to all others.
<3> if you got mixing support, you should here both sounds.
<6> kurai: two cards slaved together for double the theoretical performance
<0> i don't really like macs :P
<3> richiefrich: I did only get music in my left speaker using alsa in kernel
<5> isn't that a bsd kernel ?
<7> MidnighToker: but its sssoooooo pretty
<0> how the heck do u use 2 cards on one screen?
<3> richiefrich: this were due that alsa-lib and alsa in kernel were different versions
<0> ah dual screen
<0> :P
<0> XD
<2> Oh
<6> kurai: go to nvidia.com and anandtech.com and read up on SLI.
<3> richiefrich: but as alsa-driver follows alsa-lib there should be no such problem
<2> I am playing two audacious' fine, HW mixing works I suppose
<4> VAXinate: i think they're ace, specially the older ones, but read this: http://www.anandtech.com/mac/showdoc.aspx?i=2436&p=1
<6> kurai: both cards push to one screen.
<0> i was going to get an nvidia 5200
<0> but iono if that supports XGL
<2> I was trying to listen to music and play a flash game, I had audacious running and flock didn't give me any sound, sigh
<2> kurai, It does
<0> w00t
<8> Azoff, ok, in my alsamixer i cant up the surrond sound so might alsa-driver change that
<6> kurai: 5200? those are like $100 these days.
<2> kurai, I suggest a 5700 though
<0> screw ATI :P
<2> 5200 is like.. $50
<2> eww
<2> You are crazy
<0> 5200 is $129 where i live
<2> I bought a 5700 for $100 2 years ago dude
<0> i want the 7800 i think which is like $400
<3> richiefrich: have it a try.. :-)
<6> Introvert, kurai: nvidia only supports xgl in an xnest on top of regular X
<6> Introvert, kurai: radeon and matrox drivers in the xorg tree are the only ones suporting xegl standalone (AFAIK)
<8> Azoff, then i must, just disable alsa totally in kerenl for alsa-driver right
<2> grey_wolf, http://www.newegg.com/Product/Product.asp?Item=N82E16814140027
<0> i should have bought the nvidia card instead of ati *kicks self*
<2> I have a 6600GT 128mb on PCI-E and play Doom 3 ultra high
<9> hi, does anybody know how i can use sed or something else to strip off part of a filename? i have a bunch of file like "- 149.jpg" and wanna strip off the "- " part
<2> Lol
<2> 2x AA
<3> richiefrich: yes, but I think it could be enabled as modules too... but I have never tested it
<0> i seen a graphics card for $1200 :o
<10> kurai: every ati user things so ;)
<7> i should have bought nvidia too :(
<2> kurai, Most likely for rendering
<2> kurai, Quadro probably
<0> ati screwed me over
<0> i want Quadro :(
<6> vladuz976: rename "- " "" "- *"
<2> It's not that good for gaming, kurai
<6> vladuz976: booyah.
<0> i want a gaming card
<8> guys i have a --> driver loding then hanging on boot --> it's the AIC 7xxx driver any suggestions
<2> a 7900GTX 512mb is the best out
<1> vladuz976: for file in *.jpg; do mv "${file}" "${##* }"; done
<0> but u can't do much gaming on Linux :(
<6> vladuz976: err, don't quote that third part
<4> richiefrich: thats SCSI, yeah?
<6> vladuz976: rename "- " "" *.jpg
<8> MidnighToker, yes
<0> im going to buy a 5200 right now then get the 7900 later ;)
<2> lol
<1> vladuz976: although for file in *.jpg; do mv "${file}" "${## - }"; done would be more precise
<4> richiefrich: i was having mine hang, turned out to be a cable/drive problem
<8> MidnighToker, http://forums.gentoo.org/viewtopic-t-295350-highlight-aic7xxx.html
<2> kurai, I suggest a 5700, it's around $20 more but it whoops arse
<2> kurai, Well, in comparison to a 5200
<8> MidnighToker, thats not my post but same problem
<9> blackace: grey_wolf thanks i'll try both
<0> how much is the 5700?
<4> richiefrich: why 2004 gentoo?
<1> vladuz976: eh, if you have rename just try grey_wolf's...both wouldn't work :)
<11> anyone not know how to make .lesshst show in the dir after exiting a chroot
<4> richiefrich: or are you using 2006?
<6> kurai: doubt you'd see it for more than $125
<1> chron: what do you mean?
<8> MidnighToker, yes 2006, but that post is my same problem
<7> almost doneee!!!
<0> grey_wolf: not bad
<6> kurai: it's horribly old, though.
<9> blackace: grey_wolf made two suggestions the rename or the mv part?
<8> MidnighToker, there no much there what might i try?
<11> i got .lesshst in my /
<0> grey_wolf: can u check circuit and see if they have a 5700 in the 77044 zip code?
<11> i don't know where it came from, it's obviously chroot
<0> circuit city*
<11> or from running less
<0> :P
<6> vladuz976: rename is a little easier
<4> richiefrich: just trying to think what it could be. has the card ever worled?
<1> vladuz976: I said mv, but if you have rename, use what grey_wolf suggested
<0> cause im having to reinstall Gentoo :(
<9> grey_wolf: blackace the rename thing worked nicely. thanks a lot
<5> i'm getting 404's from emerge
<8> MidnighToker, the card is on the MB
<4> blackace: i didn't even realise there was rename :)
<6> kurai: i can tell you they more than likely don't. you're better off getting it from newegg.
<0> :(
<4> richiefrich: so this is a new install?
<0> i get dicount at cc
<6> kurai: 'sides, they over-charge.
<0> i used to work there and i know thee manager :P
<0> ill check newegg out
<6> kurai: when newegg charges less than half as much, including shipping, does your discount matter?
<0> iono
<12> any projects for a quick gentoo install ?
<4> richiefrich: i'd try loading it without any drives/cables connected, see if that works.
<8> MidnighToker, yes
<4> somekool: an installer?
<7> yesssss!!!
<8> MidnighToker, then i have no hard drive
<12> yep, an installer that would do it all in minutes
<0> if i could get it now :( im broke :(
<4> richiefrich: hang on, you're booting off the card but it cant load the module for it? if you're booting off it, doesnt it have to be built into the kernel?
<1> somekool: read the 2006.0 handbook.
<8> MidnighToker, it is built in
<4> somekool: there are a couple fo installer projects... personally i have a batch script.
Return to
#gentoo
or
Go to some related
logs:
xml.simple woosta
#perl
gentoo ping resolve
Printer not connected; will retry in 30 seconds...
python increase raw_input window size
ubuntu stuck loading linux kernel
ubuntu failed to initialize umm driver
#javascript
what does 115v 230v mean
alsa surround dapper
|
|