| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67
Comments:
<0> papaz: you are burning the isos as images, not as files onto a data cd right?
<1> dli, well, there's mice, mouse0, and mouse1
<2> papaz, use "Data verification" at burn, and burn with x4 speed
<3> Triffid_Hunter: I mean under CPUFreq processor drivers
<1> dli, any idea on what the difference between them is?
<4> Thx Peper: Ill do that now
<5> mooby: what's listed as the installed version when you type "emerge -s gentoo-source"
<0> mrwoody: nforce2 frequency scaling is what you want.. its in the northbridge, not the cpu
<6> Triffid_Hunter i burn it as image
<7> mzbot: gentoo arcanelinux portage guide
<8> arcanelinux: http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=2&chap=1
<7> http://xrl.us/jr7u
<7> o_O what's that link? :]
<6> dli well k3b has build in a data verification and i burn it with x8 speed
<6> dli should also work
<2> papaz, yes, as far as you have data verified
<6> dli now i run out of cds so i have to use a dvd :)
<3> Triffid_Hunter: you mean cpufreq-nforce2
<3> ? when I try to load that I get Error inserting cpufreq_nforce2 (/lib/modules/2.6.15-gentoo-r1/kernel/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.ko): No such device
<9> I get one answer, sys-kernel/gentoo-source
<6> dli like i said k3b has one build in (md5 sum )
<5> mooby: what's listed as the installed version?
<10> hi guys
<2> papaz, yes, but k3b doesn't do data verification by default
<7> oh, forgot to unload one script
<6> dli i set it to
<9> "not installed"
<0> mrwoody: ah it doesn't like you then, although /sys/devices/system/cpu/cpu0/cpufreq shouldn't exist if you have no cpufreq driver
<5> mooby: and what command have you been using to emerge that package?
<3> Triffid_Hunter: :-) ok... any solution to that?
<0> mrwoody: dunno.. works fine for me
<11> it's just a single checkbox in the burning dialog to tell K3B to verify written data
<12> how do I generate a binary package?
<9> "emerge gentoo-source"
<9> like written in handbook
<5> mooby: what does it say when you run that?
<5> mooby: if its several lines... don't paste it in here.. go to pastebin.com
<9> i get "there are no ebuild to satisfy gento-source
<0> Ravensky: quickpkg makes binpkgs from stuff you have installed.. you can get emerge to do it too, check man emerge
<0> mooby: its called gentoo-sources
<13> gento0-sources*
<14> hah
<13> heh
<14> gent00
<15> Ravensky: man emerge, /buildpkg, or man quickpkg
<13> doh!
<9> damn
<3> Triffid_Hunter: probably I need to edit /etc/cpuspeed.conf
<9> yes two o but I forgot the s at sources :)
<14> brianw: 93nt00 :P
<5> mooby: add an s on the end..
<16> hello
<13> it was a typ0 :)
<0> mrwoody: that's a daemon that uses the userspace governor..
<16> what do I need to do to get german input in scim?
<5> a typ0 just like the gentoo handbook?
<17> hello i made a partition now do i just place everything on to a cd ( just asking because nothing in the handbook relates to creating a partition with partition magic)
<3> Triffid_Hunter: I see... so anything else that I should look at?
<5> Jay: so don't use partition magic..
<2> mrwoody, I use cpufrequtils, no need to run a daemon
<17> i can't run fdisk
<18> brianw, would any of this cause a screw up aterm -bg black -fg green -tr -geometry 68x20 +sb -sh 20
<5> Jay: follow the hand book for partitioning..
<0> mrwoody: like i said, if /sys/devices/system/cpu/cpu0/cpufreq/ exists it should be working already.. try changing governors, see what transpires... grep . * is your friend btw ;)
<19> can anyone point me to a list of important USE flags, I am going to be using this machine as a graphical workstation, and I require support for everything from 5.1 sound to dvd burners and kde
<5> Jay: because?
<0> kn0x: /usr/portage/profiles/use.*
<3> Triffid_Hunter: /sys/devices/system/cpu/cpu0 exists but not /sys/devices/system/cpu/cpu0/cpufreq
<0> kn0x: although its much easier to just build them up as you go
<19> i see
<13> meeseontheleese: i use urxvt
<17> i get and error saying unknow program trying to access hard drive and it just shuts down
<14> mrxvt++
<3> Triffid_Hunter: /sys/devices/system/cpu/cpu0 is empty
<18> brianw, ok.... so Im guessing you cant help me
<20> urxvt++
<14> hah, lol
<0> mrwoody: ah so you don't have a driver for it.. *shrug* if the nforce2 one won't do it for you, i got nothin..
<5> jay: do you have antivirus protection built into your motherboard?
<17> no
<5> what motherboard do you have?
<0> mrwoody: i could swear it worked on nforce3 and 4 though
<17> one sec
<3> Triffid_Hunter: cpufreq_nforce2 wouldn't load
<5> jay: and what processor?
<17> ASUSTek computer inc. (Oxford)
<13> av8n?
<13> a78n rather
<5> jay: and what processor?
<21> How can i see how big a directory is?
<17> one sec
<5> du -sh /dir/
<14> jords: du -sh
<21> ty
<17> pentium 4 3200MHZ
<22> nice
<3> Triffid_Hunter: from dmesg -> cpufreq: No nForce2 chipset.
<5> jay: are you installing gentoo on a virtual machine? dual booting??
<17> trying to dual boot
<10> I have a problem when I try to install vte , I get this error -> --------------------------- ACCESS VIOLATION SUMMARY ---------------------------
<10> LOG FILE = "/var/log/sandbox/sandbox-x11-libs_-_vte-0.11.16-r1-23462.log"
<17> have made a partition
<5> are you putting windows and linux on the same drive?
<17> no i haven't even gotten to that
<0> jay; sounds like your bios' virus protection.. you'll need to turn it off to lay out your partitions
<4> jay: u still DL the x86 disc
<5> jay: do you have a working/running copy of windows on your computer that you are planning on keeping?
<17> i used partition magi cinsted of fdisk and in the handbook it's all about fdisk
<17> yeas
<17> yes
<4> jay : partition majic isnt the best tool when it comes to linux partitions
<5> I would check your bios..
<17> i came here before and some one told me to use either
<23> Peper, how would i use the gentoo cache to view the wiki
<24> is it ok to use stage3 tarball 2005.1-r1 if my install cd is 2005.1?
<4> jay: fdisk is pretty easy to use
<5> jay: it doesn't really matter... except I don't believe fdisk is the problem..
<17> i would love to use it it just won't run
<14> Impulse2: sure
<24> thx
<4> jay: ex= "fdisk /dev/hda"
<0> Impulse2: hehe you can install gentoo from a knoppix cd.. what do you reckon ;)
<5> jay.. boot up into your bios..
<25> ok, is it possible that compiling stuff with -march=athlon64 on a i686 OS breaks it?
<24> right
<24> thx
<4> jay: thats how you would get it to use whatever drive you wanna use
<13> MrS***yPants: of course
<17> one sec let me try downloading it from another location or turning off my antivirus
<25> brianw, why of course?
<14> antivirus--
<25> am I supposed to use athlon-xp as march?
<26> MrS***yPants, should be --march=k8
<25> when I run an athlon 64 ?
<24> it is possible to write GRUB to a floppy right?
<25> oh....
<5> arcanelinux: please stop suggesting things to Jay.. I've got it.. and I don't believe you would of been asking your questions earlier had you known what your doing.
<25> so there IS a difference between k8 and athlon64?
<14> Impulse2: yeah, man grub ;)
<24> nice
<4> Kury; well sorry Mr know it all
<24> is there any special considerations for installing it on a floppy?
<26> MrS***yPants, well the athlon is K7, so..
<13> MrS***yPants: get the right livecd and stage for your arch
<5> arcanelinux: thanks
<4> ***
<25> brianw, I want to run my athlon 64 in pure 32 bit 32 super 32 32 32 32 mode alright?
<13> MrS***yPants: are you wanting to go 64bit or 32bit?
<25> 3232323232332
<14> Impulse2: for rescue purpoese ?
Return to
#gentoo
or
Go to some related
logs:
HILIGHT=BLINK
B_Lizzard
(!!) TROUBLE in pre_loop_hook: TEMPBASE directory is not writable:
#perl
mstt rpm
sarge-backports udev gnome
#physics
#debian
#suse
#web
|
|