| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57
Comments:
<0> dr_wu yes
<1> X73, in a dumb definition if it was probed it must appear
<1> no sorry
<2> X73- and un-muted things?
<1> it is not lsmd
<0> dr_wu 50% volume on all, yes
<3> can anyone help with configuring kernel modules?
<4> workingmansdead: post your question.. if someone can, they'll probably help you...
<0> Frederick ah sorry , dont know any other than lsmod
<2> X73- I had to use Kmix to un-mute the master after having run alsamixer.. don't know why, but it worked..
<1> X73, first of all put 100% volume on all
<5> workingmansdead, like all of them?
<0> dr_wu i dont have xorg installed.
<0> Frederick k
<3> rommel, well i run "find /lib/modules...." and all i get is a list looking like its unpacking something, i dont see any module choices or anything
<2> X73- well, scratch that then.. :)
<1> and try thaty trick I said you about sound lemme find it
<1> X73, try cat /dev/urandom > /dev/dsp
<6> I'm having a problem with ivman, my cdrom and usb drives don't show up in media:/
<0> hmm . figured something out just a sec Frederick
<5> workingmansdead, modprobe -l
<0> dr_wu :)
<5> whats that list
<2> X73- I guess I'd make sure I had every command line XMMS util installed then..
<7> has anyone heard of the aol version for linux called gamera??
<8> NO!
<1> dr_wu, that is not needed
<8> ahh
<8> thats discusting
<3> rommel:so run this.... find /lib/modules/2.6.15-gentoo-r1/ -type f -iname '*.o' -or -iname '*.ko' modprobe -l ?
<5> workingmansdead, no
<0> Frederick GOT sound :D finally thanks
<1> X73, hoe?
<9> adub: that is really old, and no meant for embedded devices afaik, at any rate off topic for here.
<1> how
<5> workingmansdead, modprobe -l will list what modules you have
<8> emerge AOL
<3> rommel: i see, simpler that i thought, always seems to be that way. thanks
<0> Frederick forgot to type "m" to unmute channels ? :P eheh had to read help and figured that out :P lol
<1> X73, I told you about it! :p
<0> Frederick thanks for your help !
<0> eheh
<1> X73, np go sleep now take a rest and let the rest of the system build :)
<1> @localtime X73
<0> 3.11am
<0> 3h12
<1> yeah go sleep
<8> X73: you need to emerge a_life
<0> sec have to listen to my MP3
<3> rommel: problem. its looking for /lib/modules/2.6.12-gentoo-r1 i have 2.6.15-gentoo-r1
<0> tragichero already tryed gave me portage error :p
<8> lol
<0> :)
<9> workingmansdead: adjust it then...
<10> workingmansdead, uname -r
<0> i'm on vacation so .. i have my night shift always
<8> X73, did you unmask it?
<5> workingmansdead, what kernel are you running ... do uname -r and what source dir is /usr/src/linux pointing to
<5> ls -l /usr/src/linux
<0> tragichero yup
<8> that usx
<8> xine works nice :)
<0> tragichero tryed to find a vertion for win32 but no results :P
<9> better ro use readlink: readlink /usr/src/linux
<11> gnite
<0> well now i have to work on mplayer for framebuffer
<0> emerge wants to install xorg :(
<9> well not better.. heheh
<12> hey, i'm trying to setup a transparent proxy on a new box: using iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j DNAT --to-dest 127.0.0.1:1234 just gets the packets dropped. forwarding is on; non-NATted links work fine..
<13> As usual, I do a full install days before a new version comes out. :(
<14> mzbot: teach TheCool about upgrade
<15> TheCool: Gentoo releases only affect the installation media (new hardware support for the CD and such). If you already have a working Gentoo installation, update your system profile (cd /etc; ln -snf ../usr/portage/profiles/default-linux/x86/2005.1 make.profile) and system (emerge --sync && emerge -uDN world) and you're using the latest and greatest.
<14> TheCool: it doesn't matter
<16> whats a good java implementation besides the one provided by sun?
<9> meeseontheleese: blackdown is fine
<3> rommel: sorry, perhaps im hopeless. i run uname -r /lib/modules/2.6.15-gentoo-r1 and all i get is the 2.6.12-gentoo-r6 output again
<17> alright folks i'm back in X after a long hard rebuild, but CTRL+ALT+F# is being interpreted as P Q R S etc
<16> ok Ill search for that
<16> brianw, does the jdk include the jre with it?
<5> workingmansdead, no simple uname -r... to tell me what kenrel your running... that is why modprobe -l is listing the modules from that kenrel version... your running it
<9> meeseontheleese: afaik, no.
<9> meeseontheleese: but there is a jre and jdk for blackdown\
<5> workingmansdead, modprobe -l -t /lib/modules/kernelversionyouwantocheckout might do what you need
<3> rommel: uname -r is telling me 2.6.12-gentoo-r6. but ls /boot/kernel* is telling me i have 2.6.15-gentoo-r1
<5> workingmansdead, well uname -r is not wrong
<5> workingmansdead, so how did youj upgrade that kenrel... using genkernel or make menujconfig?
<18> http://fusionlime.com/ebay/craft/p2260006.jpg
<3> rommel genkernel
<18> woops sorry i didnt mean to paste that
<0> USE="-gnome -X" emerge -p mplayer < i still get x11 libs and xorg to install how can i remove them ?
<0> Frederick :)
<5> workingmansdead, well i am not familiar enough with how that script works but have you rebooted since you built this newer kernel?
<19> [22:22:36] <20> i accidentally typed mount /dev/
<19> [22:22:43] <20> and everything in dev went away
<20> o_o
<20> so
<21> how can i extract multiple zips at once?
<20> i just accidentally typed mount /dev
<20> and now everything in there is gone
<20> o_o
<20> i tried umounting and it says that its busy
<19> teehee.
<3> rommel: no i started the gentoo build from scratch this afternoon. ive gone from the beginning (fdisk) to where i am now
<18> Does anyone use ebay regularly? i have a super quick question
<22> IAmWill: script it
<14> IAmWill: for file in *.zip; do unzip $file; done
<22> ^ like that
<9> moreon: don't forget the trailing ; :)
<5> workingmansdead, ok so you need to reboot to load the newer kernel image.... make sure your grub.conf reflects the new kernel image name in boot
<14> brianw: umm, don't need it :P
<14> brianw: this isn't C :)
<9> moreon: i swear it complained on me...
<17> oh man what a relief;
<14> brianw: bash?
<17> i'm never sure where to drop the semicolon;
<3> rommel: i havent gotten to the bootloader yet. there is no bootloader on my machine
<9> heh
<9> oh well
<5> workingmansdead, ok
<23> is it a good idea to leave config protect on?
<5> well get to that before you reboot then....lol
<9> yup not needed, odd indeed
<14> Kakihara: yes. in fact its an insane idea not to :P
<21> moreon: thanks, it worked
<14> brianw: you use a semicolon or a newline to separate commands. if its the last command... no need for a semicolon :P
<21> moreon: :)
<9> moreon: ahh ya, that is it
<23> thanks - I need to update a config file but I'm not sure how. Following instructions from emerge --help config I've found out what file needs updating, but not how to update it.
<23> Where can I learn about this?
<14> Kakihara: etc-update or dispatch-conf
<1> X73, what do you want? :)
<3> rommel: so should i just reboot, mount the partitions and try again?
<18> Does anyone use ebay regularly? i have a super quick question
<0> Frederick i wanted to compile mplayer without having to install xorg :P
<3> thisbullet: occaisionally, whats your question
<5> workingmansdead, what are you trying to do... what module do you need
<3> rommel: whatever is required
<24> NOIGE!
<3> rommel: are any required?
<5> workingmansdead, well no what i mean is this is a new install... right
<3> rommel: yes
<1> X73, did you manage it?
<0> Frederick +- did a USE="-kde -gnome -X fbcon alsa" emerge mplayer
<0> eheh
<5> then finish the steps outlined in the handbook your following..... you need to emerge and configure grub then edit all the files in /etc/... like fstab and /etc/conf.d/net ... the handbook tells you what to do to get ready for the first real boot of your install
<18> workingmansdead, say if i set the catagory to books is it possible to change it to computers after its listed?
<5> workingmansdead, ^
<22> X73: there are a lot of use flags that cause an xorg dep for mplayer... gtk, opengl, xv, yada yada
<1> X73, you could used something console based
<9> X73: not a good idea to use USE= on the command line
Return to
#gentoo
or
Go to some related
logs:
#perl
glxgears intel 915M
#oe
ssh timeout debian putty
#math mbot
#debian
k3b + gentoo + unable to eject + mkisofs
herodic + php
Intel GMA 950 opensuse
#linux
|
|
