| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58
Comments:
<0> kojiro, I have win32codecs use flag set, but it doesn't make any difference. I tried running emerge -pv mplayer-cvs, and whether I set the win32codecs USE flag or not, it's unselected...
<1> nvidia-kernel should pull in nvidia-glx as a dependency. then emerge nvidia-settings and use nvidia-settings to setup your xorg.conf
<2> Steven: nvidia-settings? I haven't emerged that package. That might be part of it.
<3> c***iopea: you're not using amd64 are you? :-)
<1> Cutriss, i like that package
<4> c***iopea: It could have something to do with the fact you're using mplayer-cvs
<5> needsome and Steven_6040: is this where i continue with the shorewall docs so that i can use eth1 to connect to a 4-port hub where my internal network will be?
<0> alveraan, I am
<6> c***iopea, I bet the useflag only works with mplayer
<6> c***iopea, not mplayer-cvs
<6> oh, there we go
<3> c***iopea: well that won't work
<0> kojiro, There was a specific reason why I'm using mplayer-cvs instead of just plain mplayer... don't remember what it was, though
<0> alveraan, why not?
<7> What could be the problem as I cannot chroot to /mnt/hda7 (wich is my root partition) in Live-CDs?
<1> lovecoder, you probably have a gateway on net.eth1.. therefore all traffic will go through that because that was the last loaded interface. I'd suspect you either need to not give it a gateway or change your firewall
<7> "Segmentation fault"
<8> hi... can you say me how to set dns server ip address.....
<1> KimmoKM, have you run the gentoo memtest96 ? sounds like dodgy ram to me
<1> *86
<9> NorthDragon: edit /etc/resolv.conf
<7> Steven_6040: Yeah, I have.
<9> add a line... nameserver 192.168.0.x
<8> what parameter?
<7> I ran it 5 times and it didn't find errors.
<8> nameserver?
<7> But I can mount and use all partitions and Knoppix works fine.
<9> Steven_6040: memtest96 r0cks :D
<10> hello
<5> Steven_6040: i didn't have anything on eth1 before, i just installed it, but yes, now i do want to turn it into a gateway (i think that's what it's called), i mean i want to be able to give other machines access to the net, through eth1
<11> anyone knwo what this error means when doing make && make modules_install: WARNING: /lib/modules/2.6.15.1/video/fglrx.ko needs unknown symbol pm_register
<7> I thought that could possibly be why my system doesn't boot (cannot chroot).
<12> hy guys
<1> KimmoKM, just out of curiosity what happens when you start the livecd with nosmp noapic nolapic
<12> anyone here uses SCIM?
<3> c***iopea: I think for win32codecs to work you'd have to use the x86 version of mplayer.
<8> i set this parameter but still got
<8> # host gentoo.org
<8> can't resole host name
<7> Steven_6040: Gentoo LiveCD?
<12> alveraan: that's correct
<7> What do "nosmp", "noapic" and "nolapic" do?
<9> NorthDragon: does your network works?
<8> yes
<9> can you ping the nameserver?
<1> KimmoKM, turns off smp, apic and lapic :)
<0> alveraan, that ****s....how do I emerge the x86 version of mplayer?
<8> yes
<9> so...
<7> Steven_6040: :)
<9> nameserver IP
<10> if i logout from gnome and try to log in again, it will hang... i have to restart the computer.
<9> and dnslookup host.org doesn't work?
<10> does anybody know what can be happening?
<1> KimmoKM, they are *stable* options
<7> Okay.
<3> c***iopea: not sure
<8> gentoo minimal CD does not have dnslookup util
<7> (Gentoo Live-CD works fine too but I cannot chroot to my /-partition and I cannot chroot in Knoppix either)
<3> c***iopea: I'm 64 bit only
<13> c***iopea, what is your cpu architecture
<7> Well, I'll test. :|
<8> ping nameserverIP work fine
<8> and in links i can enter some page
<14> thx egonis, just read it :)
<8> but only bi ip address
<1> lovecoder, im sure there are some faqs on the gentoo wiki about using iptables to create a gentoo router, i'd read some :)
<15> does ne1 know of a how-to for configuring appleshare?
<1> s/faqs/howtos
<6> mzbot, wiki iptables
<16> kojiro: http://gentoo-wiki.com/HOWTO_Iptables_for_newbies
<2> Steven: (nvidia-settings:16704): Gtk-WARNING **: cannot open display:
<17> hello, to enable mouse wheel, I have to edit Xorg.conf right ?
<3> c***iopea: never done this but maybe you could mask mplayer in package.mask, then do a ACCEPT_KEYWORDS="x86" emerge mplayer. Probably ugly though
<0> heyodee, I've got a 64-bit cpu with a 64-bit system
<6> apu2, yes
<17> what if file doesn't exit ?
<6> apu2, lowercase x
<7> Well, I'll save my home directory in Knoppix so it is nicer to return there, then I'll try nosmp, noapic, nolapic.. |
<3> no wait, that won't work. I don't know and leave it to the experts :-)
<1> Cutriss, exit out of X and do an X -configure for me
<0> alveraan, wouldn't I need to recompile the entire system as 32-bit?
<2> Steven: Wasn't in X.
<17> kojiro, sry typo
<8> can any body help me?
<13> c***iopea:-: just emerge mplayer, since you have your make file configured as an x86 system
<1> Cutriss, that would explain the not opening Gtk warning then :)
<3> c***iopea: no
<6> apu2, if /etc/X11/xorg.conf doesn't exist then you should create it
<0> alveraan, can I do it with mplayer-cvs?
<15> does anyone know how to setup appleshare for linux?
<13> c***iopea:-: no
<2> Steven: Ah. I'll try that again then. Figured it was a CLI app
<7> What? :o There was a problem when I created Knoppix home directory image? :| Anyway, I'll try --->
<1> Cutriss, i think you'll need to do the X -configure first
<13> c***iopea: You will not have to recompile the entire system
<2> Steven: I did and it listed a bunch of info. Did I need to just run it or manipulate it in any way?
<18> hi folks, newbie linux question. How do you add another group for a user, basically i need to be in plugdev but aren't at the moment
<19> galeon crashes at startup. when i run it with gdb this message is displayed: http://pastebin.com/524277
<13> gp***wd -a user group
<18> heyodee, thanks
<13> boabsta: no problem
<1> Cutriss, can you press NV and <tab> there should be a script to create devices
<6> NVMakeDevices.sh or something like that
<1> yeah
<0> alveraan, why do I need to mask mplayer? Wouldn't that stop me from emerging mplayer?
<20> my kernel build failed
<20> 2.6.15-r1
<2> Steven: ERROR: NV-CONTROL extension not found on this Display.
<13> c***iopea: Dont mask mplayer, just emerge it and eneable the use flags you need
<3> c***iopea: yeah I wrote "no wait, that won't work. I don't know and will leave it to the experts" shortly afterwards.;-)
<20> undefined reference to cfb_fillrect
<2> Steven: (nvidia-settings:16831): Gdk-CRITICAL **: gdk_window_invalidate_rect: ***ertion 'window != NULL' failed
<12> I have some input methods present in SCIM control panel, but they don't show up in input mode selection menu, can anyone help me?
<0> alveraan, o, sry, thanx
<1> Cutriss, np, exit X run that NVMakeDevices.sh script, then X -configure, then do what it says on the last line to test the config file
<2> kk, one sec
<0> alveraan, but if win32codecs isn't 64-bit compatible, why was I able to emerge it?
<21> hello to all
<0> heyodee, the problem is that win32codecs isn't compatible with 64-bit mplayer
<2> Steven: Not found.
<1> Cutriss, on the NV* script?
<3> c***iopea: yeah probably because you CAN use it with 32bit mplayer
<2> Steven: Correct
<13> c***iopea: and you cant just compile? Does it fail on compile?
<21> im new to gentoo,actally i run kanotix wich is debian based,i was windering if gentoo is harder? and how gentoo manage packages? i find apt-get very easy
<1> Cutriss, i forget it's name do NV<tab>
<3> c***iopea: question for me is how to merge 32bit programs when 64bit stuff is available.
<2> Steven: From /etc/X11?
<6> Cutriss, as root: /sbin/NVmakedevices.sh
<2> Thanks kojiro
<3> heyodee: apparently the win32codecs use flag is ignored (which is logical)
<0> heyodee, no, it gets compiled without win32codecs
<0> alveraan, that's a really good question, someone said there's a howto at gentoo.org, I'll have a look
<21> i see that not too much help in this channel, whis is one of the reasons i started with kanotix,they have a very good supprt #.anyway thank youn for nothing
<3> c***iopea: ok me too :-)
<1> wwallace_lap, give it time :)
<6> wwallace_lap, no problem. Have a great day and enjoy kanotix
<22> alveraan: I'm not entirely positive, but I think it's just as matter of keywords
<21> i will
<23> it's really openoffice-bin big 1,5 gb?
<22> alveraan: I've never used amd64, so I'm not positive
<13> c***iopea: i had no idea about that. I will google it
<22> 1.5gb?
<24> whata 1.5gb
<2> Steven: Want me to post the output? It came on stderr I think, so I couldn't pipe it to a file.
<24> it is ~ 150 mb
<1> Cutriss, the output of that NVmakedevices.sh?
<2> It didn't have any output.
<1> The output of X -configure?
<3> c***iopea: http://www.gentoo.org/doc/en/gentoo-amd64-faq.xml
Return to
#gentoo
or
Go to some related
logs:
#php
gentoo xine-mms
debian RWIN value
#suse
p4_clockmod parameters
#css
rtorrent banned
ubuntu p5ld2 ALSA
#perl
#linux
|
|