| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56
Comments:
<0> ...will take
<1> DoGF00D, No. Your user.
<2> notben_, another thing great is the all dynamic thing, no pre-allocated inode tables, so, no 5% reserved
<3> usedtoubuntu: bout an hour probably
<4> usedtoubuntu, default config? 2 hours
<0> thanks doesnt sound too bad
<0> how about x and gnome-light?
<5> usedtoubuntu: why not just compile your own kernel with just the things your laptop will use
<3> i guess im used to my older systems' kernels being pretty well stripped down
<5> same here notben_
<0> i probrobly will eventually
<6> vagrant: first, I think stage1 gentoo installation is abandoned in gentoo, it is better to use stage3 in first p***, later you can always do --deep --update world, for main problem, I don't know, seems you are using problematic hardware -- why people don't just look at fsf.org hardware database to look for hardware that works well under linux and has free drivers?
<7> AnMaster: http://pastebin.com/572627, this look ok?
<0> but what about compilng X and gnome?
<8> sredojevics: why has stage one and two been abandoned?
<4> usedtoubuntu, takes a few hours
<9> Anyone here know much about Mesa and GLUT?
<0> ok not too bad thanks for the help
<3> BanditZa: http://www.gentoo.org/doc/en/faq.xml#stage12
<1> SMDButtsecks, If you want reiserfs yes.
<2> badblocks shows all continues bad blocks after 41815920
<7> AnMaster: resier vs ext3 in your opinion?
<10> alright, portage is taking v e r y l o n g to do an 'emerge sync', any thoughts? ... we're looking at a stall at Updating Portage cache when it is at 50,51,53%
<11> AnMaster got damn, your right thanks alot :o)
<1> SMDButtsecks, I use reiserfs3 only.
<12> !op
<2> AnMaster, looks like I should try repartition
<12> !op
<7> AnMaster: if I press Y it will use reiserfs "3" right?
<13> <3 reiserfs
<1> DoGF00D, RTFM
<5> <3 reiserfs and dodmraid
<14> no rtfm here please
<1> SMDButtsecks, Yes.
<7> AnMaster: thanks
<4> ^usuario, stop it.
<15> sredojevics: thanks, so stage1 is abandoned? Why not put it in the docs ..? As for the hardware, its a linksys wmp54g. I googled and it is supported but the packages aren't included on the cd
<1> mbishop, ?
<7> AnMaster: tells me to reboot after FDISK... do I have to or can I keep installing?
<0> vagrant: Why not put it in the docs ..? its in the handbook
<1> SMDButtsecks, I never did.
<7> AnMaster: ok
<2> vagrant, too bad, if the hardware is not supported by the livecd
<15> The handbook says stage1 is abandoned? sorry, missed it.
<0> in this part: http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?full=1#book_part1_chap2
<0> near the end
<14> AnMaster: what? we don't do rtfm here, this isn't debian
<13> amen
<16> Hi there
<14> AnMaster: if you want him to read a manual, politely tell him which manual he should be looking at
<17> hi
<15> I found docs to get it to work ..... I just can't run ebuild ... "command not found" ...
<3> gentoo does have some good "fm's" though
<17> what a bagman :)
<16> Could anybody explain me the difference between using vesafb and nvidiafb ?
<17> is that somebody who makes you a second offer in a kidnapping somehow a negiciator
<18> Hey
<16> I have a nVIDIA graphics card
<1> mbishop, I this case "Gentoo Handbook"
<18> I need a video player for Mozilla Firefox
<18> What emerge is that?
<2> vagrant, I suppose you should run emerge instead of ebuild
<0> lupo: vesa is unaccelerated
<18> And it must be able to play wmv
<19> nox-Hand||sleep wake up, then emerge mplayerplug-in =)
<15> it says command-not-found for emerge as well ...
<4> nox-Hand||sleep, emerge mplayerplug-in
<15> i just booted up with the livecd ..
<3> vagrant: you cant emerge from the livecd environment
<18> harritj, roger55, Cheers :)
<4> nox-Hand||sleep, make sure you have win32codecs in USEflags
<6> vagrant: BanditZa: that was decision a few months back, didn't know docs are not updated yet, maybe some developer can tell what is status of this?
<2> nox-Hand||sleep, I think mplayer can do that, or totem, try USE="nsplugin"
<4> nox-Hand||sleep, and asf too
<18> roger55, Uhhm, how do I do that?
<0> lupo:iirc the nvidia is a accelereated driver that should make it work more efficietly
<6> vagrant: drivers exist in portage tree?
<4> nox-Hand||sleep, nano -w /etc/make.conf
<18> roger55, Yes, but what should I do there?
<7> AnMaster: The LiveCD i used to create the reiserfs is running a 2.4 kernel... is it OK if I install a 2.6 kernel during install?
<15> i had to download the ndiswrapper and put it on a floppy
<4> nox-Hand||sleep, USE="win32codecs asf"
<18> roger55, add that? OK
<1> SMDButtsecks, Old live cd?
<15> so I have it, i just need to build it. I followed docs for this, but doesn't mention that ebuild doesn't work in livecd env
<7> AnMaster: 2.4.27 kernel
<2> SMDButtsecks, that's old :(
<18> roger55, Cheers :)
<4> vagrant, there is no gcc in the installcd either
<1> SMDButtsecks, What live cd version it that?
<15> i noticed that
<7> dli: should it matter?
<4> vagrant, you can only emerge and build on your install
<13> SMDButtsecks: very much so
<1> SMDButtsecks, And what arch?
<7> AnMaster: its an xbox live cd
<13> is that put out by gentoo or someone else?
<2> SMDButtsecks, for hardware support yes
<1> SMDButtsecks, Don't use reiserfs then!
<15> I followed this guide: http://gentoo-wiki.com/HARDWARE_wmp54gs
<7> AnMaster: why not... ?
<15> at the bottom it talks about doing a fresh-install
<7> AnMaster: i typed the command and it seemed to work
<20> is there any performance differene if i bootstrap and recompile gentoo under amd64 instead of x86?
<6> vagrant: somebody also told you, emerge works inside chroot env as it should -- just keep going with install steps and after steps chroot /bin/bash /mnt/gentoo; source /etc/profile ; /sbin/env-update continue with emerge ndis or whatever
<7> ReiserFS is successfully created on /dev/hda3.
<1> SMDButtsecks, http://gentoo-wiki.com/Xbox
<21> anyone know how to show pms in ircii
<7> AnMaster: im reading that
<1> SMDButtsecks, "The current LiveCD does not support ReiserFS"
<7> AnMaster: i see that...
<15> lol... gentoo's docs are a conspiracy to get the user not to install it
<13> probably using someone elses livecd
<1> SMDButtsecks, "If you REALLY want reiserfs, it is possible to boot off a Xebian LiveCD"
<7> AnMaster: not sure how its not supported though... it just formated with it
<1> SMDButtsecks, Can you mount it?
<22> SMDButtsecks, reiserfs is supported
<15> ok, since we've established that rtfm is bollocks because the documentation is contradictory ... what is the best way to install it on a wireless network with the nic not yet configured and still benefit from a fully compiled env. ?
<22> reiser4 isnt
<7> rommel: reiser4 is supported in current xbox livecd?
<7> *3
<22> v3
<7> ok
<20> is there any performance differene if i bootstrap and recompile gentoo under amd64 instead of x86?
<7> anything better about v4?
<12> **** You
<16> Hi, people
<12> **** All
<23> in 3 ...
<24> cool
<13> roger55: ping ( ^usuario )
<23> ... 2
<25> whats the quickest way to find IP # (not the 192.168.1.#)?
<23> .... 1
<16> What's the difference between vesafb and nvidiafb ?
<22> SMDButtsecks, actually ext3 is good now.... its gotten alot of work over the past year
<16> And how can I use the last one instead of vesafb?
<4> hehe
<15> richie you can go to a site like ipchicken.org
<13> reiser4 is experimental, definatley not stable. you also need kernel patches.
<26> LupoAlberto: if you are using the nvidia graphics driver: don't use nvidiafb
<16> Why, NetFox ?
<27> richiefrich: go to http://www.whatismyip.com/ (I'm serious)
<0> i only use reiser4 for tmp, if at all
<26> LupoAlberto: because they don't like each other, and there is no good reason for nvidiafb
<0> angelchild is right works everytime
<13> i'm using it on my entire desktop but i have everything backed up on a separate disk
<26> (okay, there is one, since vesafb-tng is messed up)
<13> works good so far. but definately not for everyday use
Return to
#gentoo
or
Go to some related
logs:
#php
gentoo glxgears api mismatch
pb crontab autoexpect
how to use kmemleak patch
ashtonian bar
#ldap
not in the sudoers file ayuda
krdc emerge failed
iscompany database
got classobj instance instead
|
|