| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56
Comments:
<0> NSA-X: type mount
<1> hecate355: the normal install is a net install
<2> NSA-X: cfdisk /dev/sda
<3> ok where would the sata drivers be under?
<4> but is there any package manager like aptitute? i have used debian only, and never seen gentoo
<5> percocetpenguin: which kernel?
<3> i looked under drivers -> ata/....
<3> 2.6
<5> 2.6?
<5> k
<5> sec.
<6> Well, pasting the error will take a minute. =) The first issue's quite weird, though.
<7> I just hate lookin at sceenshots and cant get mine to look as good
<1> My /etc/conf/net doesn't seem to work.. it doesn't even look like its trying.. Any ideas on what to check?
<0> percocetpenguin: Device Drivers-->SCSI device support-->SCSI device support-->SCSI low-level-->Serial ATA (SATA) support
<3> nice
<3> that would explain it
<3> thanks
<3> i didn't think sata was considered scsi
<5> percocetpenguin: if you use make menuconfig you can use "/" to search but why type of SATA controller?
<8> hey all -- i just migrated to Xorg7 and it looks like i lost antialiasing on all my fonts.. anyone else run into this?
<5> there ya go
<0> Ogmios:which is precisely how i found it :)
<3> the one on the a7n8x deluxe nforce2
<3> i think it's silicon image
<0> LupoAlberto: you comming right yet with framebuffer?
<5> SCSI_SATA_SIL
<9> (640x480@60) VESA default mode
<9> Yes, beowu1f
<9> I'm in trouble
<9> Which mode should I choose by default?
<9> I think an higher resolution could be better
<10> mzbot: gentoo Oliazk alt install guide
<11> Oliazk: http://www.gentoo.org/doc/en/altinstall.xml
<0> LupoAlberto: well the best way to select your mode is actually with grub.
<0> u using grub or lilo?
<12> ok, my fstab is correct, but I cannot boot. I keep getting Error 13...
<2> how can i figure out on what encoding is one filename of a file to succefully convmv it??
<0> LupoAlberto: kernel /gentoo-buld060210 root=/dev/sda4 video=vesafb:1600x1200-24@60 splash=verbose,theme:livecd-2005.1,ywrap,mtrr quiet processor.max_cstate=1
<0> LupoAlberto: forget the processor stuff at the End
<5> alexandros: transcode can tell most media formats
<1> Anyone know why my nics are not being setup on boot?
<2> Ogmios: how?
<10> Solifugus: rc-status ?
<2> beowu1f: what the processor.max_cstate=1 is doing?
<0> LupoAlberto: you must also make sure you have [initrd] compiled into your kernel
<5> alexandros: install transcode and read the man
<13> it makes your machine super 1337
<5> there are a lot of options
<1> brianw: rc-status shows a few things including netmount--is the the one?
<9> I don't use GRUB as my boot selector
<9> I prefer LILO, I'm more used to its sintax and configuration
<7> I wish my gnome looked like this with exception of being ubuntu
<7> http://adesklets.sourceforge.net/images/contrib/louis_0.jpg
<2> Ogmios: search for what on the man?? i have transcode allready installed
<1> LupoAlberto.. too bad.. grub is owesome
<9> But I think the way to select a certain resolution is almost the same as that for GRUB
<0> alexandros: my dell precision has intel processor with different power levels to choose from (called c-states)
<9> I have experienced bad configurations with GRUB
<7> i like grub
<7> easier to maintain than lilo
<9> Once, a Linux distribution I don't want to remember overwrote my Windows partition
<9> Without asking for my persmission
<13> GenBot botsnack
<5> alexandros: from what format to what?
<9> And I lost all the data I had in that partition
<7> LupoAlberto probably an error on your part
<1> LupoAlberto.. yes.. the Omish are more used to their ways, too.. LILO is ok.
<2> Ogmios: i want to convert for iso8859-x to utf8
<2> arcane: whats the theme name tha you are using
<2> ?
<14> LILO?
<7> that screenshots not mine
<14> GRUB <3
<14> GNU :)
<7> im just using the default
<0> LupoAlberto: grub p***es the resolution to kernel for framebuffer to use. i've had difficulty trying to get the same effect with lilo
<12> can anyone tell me why Grub is giving me an Error 13? grub.conf: http://rafb.net/paste/results/HHNhYC51.html
<8> yeah, i've actually had much better experiences with grub as well.
<12> my partitions are: /boot - /dev/hdc2; / - /dev/hdc4; windows - /dev/hdc1
<5> alexandros: i have only used transcode to conver movie formats
<7> NSA-X thats not an error thats your config
<12> arcane: I know
<2> ok
<7> well whats the errot
<12> I was wondering if there's something in my config making the error happen
<15> tar: portage/games-rpg: time stamp 2006-02-26 01:37:27 is 14541 s in the future
<7> *error
<15> that bad error?
<6> Alrighty all, had to type the error in I'm getting while exiting X and that spams while X is running. 3D acceleration is working properly now, however, all fonts in KDE got larger mysteriously (is there a global setting for this), and this error is occuring, =/ - http://rafb.net/paste/results/fzaGQJ63.html
<12> Error 13: Invalid or unsupported executable format
<14> NSA-X: "rootnoverify (hd0,0)"
<6> Many thanks for any advice to get me in the right direction ;)
<12> rvalles, what's wrong with that?
<16> I am tryingto emerge visualboyadvance and i get this error, http://www.geekbin.net/pastebin.php?show=48, can someone help?
<14> NSA-X: just "root", not "rootnoverify", isn't needed and I've never seen a rootnoverify in a grub.conf file
<14> NSA-X: so if there's something I'd suspect from a quicklook is that.
<12> rvalles, the handbook says to use it with dualbooting a WinXP box..
<0> NSA-X: rootnoverify is correct.. i use it for xp
<14> beowu1f: I use xp and use just "root"
<12> I can boot the XP partition anyways
<14> boots okay, never had a problem
<12> it's the Gentoo partition I have a problem with
<0> rvalles: then both work.. thats not the issue then
<14> beowu1f: so weird.
<14> "fallback 1"
<14> what does that line do?
<17> rootnoverify works for me
<6> my x.org error log is showing nothing in that log itself, also. no errors shown at all.
<14> I don't have a "fallback" line in my grub.conf, either.
<2> how can i see info about a file?? ex: created date and filename encoding..!!
<12> rvalles, it boots the second entry in the event that the first one doesn't work
<0> exactly
<12> although if you cancel the timeout, it doesn't take effect
<17> fallback just tells grub if default option dont work to try the next if it exists
<3> new problem
<3> now when i try to boot I get this
<3> kernel gentoo is big, overlaps lilo second stage
<18> what would cause a message "mount: /dev/sda1 is not a valid block device"?
<12> tezyn, it didn't detect any hardware for /dev/sda1
<12> or didn't place an entry there
<19> Anyone here have an Intel 82865G Graphics card?
<12> check dmesg for where it is
<19> Or know about it?
<17> NSA-X: kernel /boot/gentoo-2.6.15-r5-01 root=/dev/sdb2 your line does not have the boot dir in it
<7> Capso whats the problem?
<1> How do I add eth0 to the default runlevel?
<12> D1A, so I add /boot before my /kernel-... entry?
<18> NSA-X: ohci_hcd and address 11 and 12
<3> anyone?
<20> rc-update add net.eth0 default
<6> alexandros: ran into that issue before with your X600?
<5> percocetpenguin: lots of google hits on that
<17> NSA-X: well it might help i have it in mine and it works worth a try
<21> Solifugus: rc-update add net.eth0 default
<19> Arcane: I need to know how to enable DRI support for it. Any ideas?
<22> Hey, what's the newest reasonably stable (on Linux) Nvidia card?
<12> D1A, k, give me a sec
<7> Capso ta know I could never figure out how to do that with any distro
<1> forrest: that's what I thought.. says it cannot find it, but it's in /etc/init.d/ as net.eth0
<19> Arcane: ...?
<7> have you checked the forums?
<5> percocetpenguin: did you rerun lilo
<5> after you installed the new kernel?
<7> someone has been bound to have that problem or at least a similar
<2> inferno: no never
Return to
#gentoo
or
Go to some related
logs:
fedora-rpmdevtool
#oe
xml2png
awbassett
minpci reception
#proftpd
centos 8tb
apt-get i810switch
getenforce centos3
UPS- BGLAD
|
|
