| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49
Comments:
<antarus|work> _AxS_: oh the attic
<Steve973> good call
<ni1s> kojiro, inzanez , http://www.zugaina.org/gentoo/ebuildexchange/media-video.html.en#mplayer-cvs
<_AxS_> Steve973-> your packets getting dropped? ssh will wait for hours before erroring on a failed connection
<kojiro> holy USE falgs
<kojiro> flags
<inzanez> ni1s: thx!
<Steve973> _AxS_, not sure what is going on. i should be able to ssh from here.
<ni1s> inzanez, np
<kojiro> I forgot, the only package with more useflags than mplayer is php, :-P
<Steve973> _AxS_, good question though. maybe it's not an issue on my end.
<kojiro> Steve973, is your ISP getting involved?
<Steve973> kojiro, not sure. i set my box up yesterday and I'm just trying to connect from work today, and having trouble
<Steve973> trying to figure out what might be going on
<ttye0> Are there any alternatives to xsane for graphical scanning
<antarus|work> Steve973: work normally lets out ssh traffic fine?
<Steve973> antarus|work, i believe so. never had problems before. might be something flakey today though.
<cschrader> Steve973 if you do a 'telnet, ip.add.ress 22' what happens?
<kojiro> s/telnet/ssh
<_AxS_> no he means tenlet -- he wants to see a dump of the connection
<cschrader> i really mean telnet
<kojiro> ah
<Steve973> i'd have to install telnet
<inzanez> shouldn't I be able to emerge "mplayer-cvs" after packing it into portage and "ebuild <...ebuild> digest" ?
<Steve973> hang on
<kojiro> inzanez, yeah, I think so
<azi_> hm.. another quick quiestion (this one _should_ be easy) my X client is complaining that he's unable to change mode of /dev/pts/0 to 666 , but it works as root normally,,.. is there any config file i should tweak in order to make it support normal users too?
<xinming> If I emerge gnome-vfs why will the gnome-vfs-2.0 needed?
<_AxS_> inzanez-> ..probably yep.. you're putting it into a portdir overlday?
<inzanez> kojiro: it's missing media-libs/divx4linux-2xxxx, but that does not exist ;)
<xinming> http://paste.lisp.org/display/17098
<Steve973> which telnet package is preferred?
<xinming> I've tried many times, I still can't install the gnome-vfs :-/
<Steve973> telnet-bsd?
<inzanez> _AxS_ whats that "portdir overlay"? :)
<cschrader> it doesnt really matter if your just telnet'ing out
<_AxS_> inzanez-> a way of adding extra ebuilds to your system without messig with the original portage snapshot
<azi_> anyone ? :\ i even tryed to chown/chmod /dev/pts ;-/
<kojiro> inzanez, I think that package has been replaced by some other divx package. You'll need to find out what and modify the ebuild to point to it. :-/
<lesshaste> when I plug my digital camera into my usb port, nothing appears in dmesg.. what can I do?
<inzanez> _AxS_ ah, ok, yes, but as I worte, its missing some other ebuild which is not available...:/
<Steve973> installing now
<_AxS_> well..you could get that one too maybe..
<MagmaRules> back agian
<inzanez> I'm searching, yep.
<cschrader> steve if the ssh session worked, it will look like this:
<cschrader> telnet www.dca.net 22
<cschrader> Trying 207.245.82.35...
<cschrader> Connected to www.dca.net.
<cschrader> Escape character is '^]'.
<cschrader> SSH-1.99-OpenSSH_3.4p1
<_AxS_> ..or hack the ebuild to use a different divx package ?
<MagmaRules> my root user is not getting his $PATH updated
<MagmaRules> i have created a file 99magma
<_AxS_> MagmaRules-> cp /etc/skel/.* ~
<kojiro> inzanez, try comparing it with the current mplayer ebuild
<_AxS_> log out and log back in
<Steve973> right now, it's not able to connect to port 22
<inzanez> kojiro: wll do
<Riun> erm on gentoo, what is the library (that i would need to include in a c++ program) to get a windows? (for windows apparently it's <windows.h> so would it be <linux.h>? or <opengl.h> or something?
<MagmaRules> _AxS_, the root has is i think
<MagmaRules> *it
<cschrader> if telnet cant connect, id check firewalls and routers and whatnot
<cschrader> or your work might be blocking it
<Steve973> i'll ask them here
<lesshaste> do I have to modprobe something?
<_AxS_> MagmaRules-> it has a .bashrc and .bash_profile already in /root/ ? ok its not that then..
<thisbullet> how do i show the beta releases in portage just for 2 packages. xfce and xorg
<zork22> bye
<_AxS_> Steve973-> could also be at your ISP's side...
<_AxS_> thisbullet-> ..show?
<MagmaRules> ok it didnt had .bash_profile
<thisbullet> _AxS_, whats the syntax?
<_AxS_> lesshaste-> could be.. is all your usb stuff loaded?
<MagmaRules> logging out
<_AxS_> thisbullet-> i dunno, i'm not sure what you want to do yet
<lesshaste> _AxS_: lsmod|grep usb
<lesshaste> usb_storage 70144 0
<lesshaste> usbhid 39776 0
<_AxS_> lesshaste-> you got a uhci_hcd or ohci_hcd or ehci_hcd loaded?
<thisbullet> _AxS_, i want portage to show me the beta releases (or unstable or w/e) for xfce and x11-base :)
<lesshaste> _AxS_: all three.. with 0 in the right hand column
<_AxS_> thisbullet-> by 'portage' you mean emerge --search? I'd recommend just going to packages.gentoo.org and looking up those packages.
<_AxS_> lesshaste-> ..hmm.. have any other usb devices worked for you yet?
<inzanez> hm, works now
<thisbullet> _AxS_, i remember some one telling me to put something in /etc/make.conf and that would show all the beta releases
<lesshaste> _AxS_: the mouse is usb and works
<inzanez> at least the emerge :)
<azi_> i've noticed now that i really can't chmod (as an user) /dev/pts/0 , anyone knows why?
<azi_> i issued chown theuser /dev/pts/0
<azi_> but theuser still can't use pts/0
<Skenvoy> ok this ****s. ld is segfaulting AGAIN
<Skenvoy> it does it for kdebase AND NOW for mythtv
<Skenvoy> if it was hardware faulting, i'd be happy
<Skenvoy> cause then i can bitch at retailers
<r0hypnol> I have a folder "/.reiserfs_priv" .. can anyone tell me what it's purpoise is ?
<ttye0> xsane won't stop scanning!
<ttye0> my screen is filling with the same picture over and over
<Schmoove> hello
<ttye0> eeeeeek
<pontusen> help me! i just can't get my sound to work. there are no error msgs anywhere, alsamixer seems fine, yet no sound. wtf?
<ttye0> I love kill all
<kojiro> ttye0, sounds like it's not x...sane
<ruskie_> pontusen: plug in the cable?
<ruskie_> pontusen: do you have alasa as modules or built-in
<pontusen> ruskie_, what makes you think i need jokes? i dont need jokes, i need help
<Escalade> hello
<pontusen> ruskie_; built in
<ruskie_> pontusen: alright, i wont help.
<pontusen> ruskie_ ; kay :\
<Schmoove> pretty full here, i was hoping to ask a question. i am afraid it will get lost with all this activity here.
<kojiro> pontusen, what makes you think he was joking. A million tech-support questions have been answered by variations of the phrase "turn it on"
<Escalade> need some help with my speedtouch 510 v4.
<bcmm> does WINE have support for programs to write images to the floppy disk?
<pontusen> kojiro, okey. well, ehm. :/
<_AxS_> thisbullet-> you can change your ACCEPT_KEYWORDS to make your system EMERGE all the beta releases, but you probably don't wanna do that
<pontusen> ruskie_; yes, i plugged in my cables + sorry for my impatience
<flizzoyd83> I get an error when trying to emerge gnome. It will not build evince. I know this cannot be truly needed for gnome to work. How can I exclude this from the emerge?
<__aquarius__> is there a gentoo live cd?
<kojiro> mzbot, gentoo how to get gentoo
<mzbot> kojiro: http://www.gentoo.org/main/en/where.xml
<__aquarius__> I would need one and I will be happy if it is gentoo :D
<makzu> flizzoyd83, You could just use emerge --resume --skipfirst
<_AxS_> lesshaste-> ...not sure man.. if the mouse works, then your usb core must be working, and so you should have seen something in dmesg when you plugged in the other usb device.. ..is there anything in /proc/bus/usb?
<kojiro> mzbot, gentoo __aquarius__ how to get gentoo
<mzbot> __aquarius__: http://www.gentoo.org/main/en/where.xml
<kojiro> that will answer your question, __aquarius__
<__aquarius__> is that a clever answer? :D
<flizzoyd83> makzu, Thanks
<makzu> flizzoyd83, Though the 'better' solution would be to solve whatever problem is keeping evince from compiling.
<__aquarius__> I've been there enough times :D
<Schmoove> anybody know how to undo an emerge? is there a history somewhere? I updated my ''dev-libs/geoip package and it breaks my installed awstats.
<__aquarius__> there is a universal install cd, a min install cd and a cd with disfiles
<kojiro> __aquarius__, all of those are livecds
<__aquarius__> ok, them let me rephrase
<__aquarius__> I need a live cd with graphical enviroment (X) and couple of application
<kojiro> no, there's no gui livecd for gentoo :-P
<kojiro> __aquarius__, but there's knoppix :-)
<pontusen> you can make one. livedvd rather....
<digip1mp> Is there any way to flush the contents of an open log file to another file without disrupting the process's access to that file?
<__aquarius__> I'm aiming for icq client, irc client and a browser :D
<ruskie_> __aquarius__: get knoppix
<flizzoyd83> makzu, yeah, it is strange but i really just need to get this machine up and running. Do you have any ideas why it wouldnt compile? I have just set this box up.
<makzu> flizzoyd83, I couldn't tell you without knowing what the error is
<__aquarius__> what is knoppix, anyway?
<__aquarius__> oh, way
<pontusen> a livecd
<kojiro> __aquarius__, heh
<_AxS_> digip1mp-> flush? you mean clear? no i don't think so.. but if the app only opens the log to write and closes it directly afterwards you could probably delete or move it.. it should error if it won't let you
<__aquarius__> mzbot, knoppix aquarius what is knoppix
Return to
#gentoo
or
Go to some related
logs:
#math
ipod ubutnu
#python
what is the location of c header files that match
upload_tmp_dir ubuntu
#debian
fedora tunctl
#physics
mysql DELETE * FROM TABLE WHERE FIELD CONTAINS
#gaim
|
|
