| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
Comments:
<0> fomit-frame-pointer?
<1> does anybody know any wireless hotspot authendication system ???
<2> is "clock skew detected" dangerous?
<3> yehh Kury :?
<4> pekster: just ignore it.
<0> PEN: no
<5> pekster: then reboot will probably be the only way, or wait for the driver to come alive again
<0> PEN: don't worry about it..
<0> What is fomit-frame-pointer?
<6> goldfish: i would, but i can't start k3b anymore because it's "already running"; new k3b processes just hang
<0> maybe drop down to single user mode... first? init 1?
<3> i dont
<4> pekster: i see.
<7> TiCPU, I'm sorry, I meant uninterutible, not zombie
<8> Kury: rc single
<5> Kury: omit frame pointer gives another register for process toexecute at expense of harder to debug code
<7> uninterruptible*
<5> oh okay
<9> whats the diff between dri drm and fglrx
<9> im soo confused
<0> masq|lappy: if thats the case... restarting X completely... should work to interupt the process...
<2> TiCPU, I was missing some sort of bus thing
<7> Kury, no, its uninterruptible, it cannot recieve signals, there is no way to kill it if its locked in that state
<5> PEN: hehe, always harder with laptops
<2> especially when I don't know the words
<2> if menuconfig is messed, might I need better framebuffer support?
<6> right, even if i run /etc/init.d/xdm stop the process will still be stuck
<0> dolbyt: did you say you had tried to compile this driver into the kernel instead of a module?
<9> PEN, you may need ncurses?
<7> pekster, you have two choices really, you either somehow magically determine what k3b is waiting for
<6> okay, i think i'll just reboot. it'll be a pain to lose the transcode progress, but i want to use the PC in the meantime
<7> pekster, or you reboot
<2> klingon: I didn't see that in the kernel
<6> yea, thanks for the help all
<9> PEN, what do you mean by menuconfig is messed?
<2> the blocks are all misplaced and they change when i select them and such
<3> Kury: .. yes...
<2> I think I need vesa vga (y)
<9> PEN, check your .config file to see if "CONFIG_FB_VESA=y" is set
<0> dolbyt: i would try removing your optimization flags... and that no frame pointer stuff.. and recompile
<3> lol...
<2> klingon, it wasn't so i'm making it again atm
<0> dolbyt: just to see.. if thats causing some problems..
<10> w007 for XGL working and wobbly windows on crappy machines!
<3> NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module 1.0-6629 Wed Nov 3 11:43:48 PST 2004
<3> glxinfo[2890]: segfault at 0000000000000000 rip 00002aaaaad85fb2 rsp 00007fffff93d830 error 4
<0> dolbyt: What nvidia devices is this?
<11> how does the DISPLAY env variable get set usually?
<2> omfg when I type ls there is nothing ther
<2> wait i'm dumb as hell
<10> hehe
<0> PEN: well known fact.......
<3> Kury: agp?
<0> a nvidia graphics card
<0> ?
<9> I would kill for an nvidia card right about now
<3> geforce 6200
<12> i have one i dont need
<12> problem is it's attached to my motherboard
<12> ;)
<10> transset .9
<9> I dont know why every time I try to emerge something for X I get an error
<0> dolbyt: does this look to be the same problem? http://www.nvnews.net/vbulletin/showthread.php?t=62123
<0> klingon: Whats the error?
<2> well i got vesa vga and menuconfig is still ugly as heck
<9> call stack ebuild.sh called dyn_compile blah blah blah
<0> did you upgrade gcc lately?
<3> :O
<9> Kury, nope. Did Upgrade to modular X then downgraded to monolithic x, now re attempting modular x
<0> klingon... thats probably the problem.. isn't modular X still under development?
<13> Kury, xorg has released it as stable, the unstable marking is done by gentoo
<0> humm... no idea then..
<7> Kury, uhm, a bunch of stuff is still under development, gentoo is still under development :-P
<14> "!!! Digest verification Failed: !!! Reason: Filesize does not match recorded size" is it possibly to tell emerge to skip this check?
<3> Kury: glxinfo[2890]: segfault at 0000000000000000 rip 00002aaaaad85fb2 rsp 00007fffff93d830 error 4
<13> Mooshaminkin, you can do "ebuild somefile.ebuild digest" to surround it
<14> It's not an ebuild... it's a .tar.gz I modified in /usr/portage/distfiles/
<0> dolbyt: ya.. I don't know
<0> dolbyt: I would just search google.. and try and figure out exactly what driver people are using for this card... and what kernel version
<0> dolbyt: maybe even try a little bit older kernel version and see if that works w/ this driver
<15> 1.0.6629 nvidia drivers are bugging a lot of people
<3> ok thx
<16> bart___: heh, what did the kernel crew break this time?
<1> could somebody compare the nocatauth vs wifidog ?
<15> LSD`: well there is a bunch of posts on the driver in the gentoo forums
<15> LSD`: people have more luck with the still mask'd ones it seems
<16> bart___: that's how it tends to go: The kernel crew break something, nvidia respond but because of the gentoo testing period the fix isn't available right away
<15> LSD`: yup, I use the alternative way on nvidia nowadays
<0> dolbyt: You might try reading up on nvidia's website aswell... or possible you could even contact them?
<15> they are quite responsive on the nvidia site
<14> Which program should I use to make MD5 sums from files?
<15> Mooshaminkin: md5sum ?
<14> ah ha
<14> Thanks
<17> modules-update --verbose says (Can't open dependencies file /lib/modules/2.6.15-gentoo-r1/modules.dep (No such file or directory)) but I use kernel 2.6.15-gentoo-r4 how do I fix this?
<15> GieltjE: whats your /usr/src/linux pointing at ?
<17> /usr/src/linux-2.6.15-gentoo-r4
<18> Portage should have a package called, "Gentoo" so you could just emerge gentoo to another harddrive really easily.
<15> thats all I could think of :)
<19> anyone know the kde app that shows window snaps when the mouse hovers over a application in the taskbar?
<17> damn forgot
<18> Just type "chroot ..." and then "emerge gentoo" and blame, you're done.
<17> in a chrooted env you need to run the same kernel version as the machine in order to do this kind of thing
<15> ah yes
<20> good idea Peter, can I do that without the portage tree (for an embedded system)
<18> patric, no you may not.
<18> patric, for I am the one who says what you may or may not do, and I say you may not.
<18> Hope you're happy.
<18> I'm going to bed now.
<18> G'night
<21> hi. Is it a way to run .php3 files with php4 and .php files with php5 ? How ?
<22> is there a tool to auto detect and write a xorg file for me?
<4> yeah.
<22> i'm using that xorgcfg thing now, but it doesn't detect my mouse right and the emulator is annoying
<4> i see.
<16> sleep21: Xorg -config will do something like that. It won't be perfect though, but it'll be a start
<23> how would i connet to a network by just knowing the gateway address?
<23> is it possible?
<24> moin
<12> the network between you and the gateway has to route the traffic to the gateway as well
<12> you can also try source routing (rarely works) or owning the gateway :)
<12> or scan the gateway for proxies, or get code inside the network via email, etc.
<25> bobnormal: lets not be recommending things like that.
<26> hello, woke up this morning and no chance to get an address through dhcp!
<26> ... ok, i just get an address 192.168.0.31 which i can't use...
<26> no special notice in dmesg
<26> with osX everything works ok
<10> MOTD "isn't it funny to think that your whole life might be changed had you of bought a laptop with nvidia rather than ATI"
<27> Anyone here have troubles running lilo on a reiser4 filesystem?
<26> anybody has an idea what i could do to get an address from the dhcp server?
<27> It's slower than a kernel compile.
<16> a_l_e: swear at it, loudly
<16> robink: emerge -C lilo && emerge grub
<25> a_l_e: either you misconfigured your /etc/conf.d/net or your dhcp server has issues
<26> LSD`: wait that i close the door...
<27> LSD': I like lilo's low overhead.
<16> robink: LILO is yesterdays news and like such is best used to line birdcages and cat litter trays
<26> blackace: windows (on other machine) and osX (on same machine) normally get an address
<27> LSD`: I think it still has worth.
<25> a_l_e: so?
<27> LSD`: Is it possible to get GRUB to display as minimalist an interface as lilo offers?
<26> blackace: so it's not the dhcp server which has issues... i guess.
<26> but i'll take a look at conf.d/net
<15> a_l_e: is dhcpcd running ?
<28> hi folks!
<28> while i compile gnome electric falls down. What must i do?
<15> Cem_UNAL: buy a UPS
<28> :)
<28> it was 80 of 90.
Return to
#gentoo
or
Go to some related
logs:
glibc_2.4 kanotix
choppy xmms xubuntu
perl split loop rhel
grub loading stage1.5 error 17 ubuntu
#perl
/dev/sequencer on ubuntu
screen resizes the terminal
rsync password prompt ubuntu problem
ubunut root pass
gnome System Monitor applet spikes
|
|