| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59
Comments:
<0> then dma should be enabled on boot. are you sure?
<1> well...i've used it with no problems...Idon't use any special IDE controller
<2> some here using mutt ?
<0> ah, yes you only need the special (chipset-specific) ide drivers for Dma mode..
<0> it'll work regardless, but it won't do dma properly
<3> ruben_gonc, do hdparm /dev/hda whay does it sa about using dma ?
<0> you might want to add the right one for your kernel
<3> what*
<1> dma is on
<0> ok nm
<1> sorry....just the other optimizations aren't
<1> it is all good with the disk
<3> ruben_gonc, your kernel is OK then. Check again when/if it gets slow
<0> run 'top' in one xterm and start an emerge in another.. watch what happens...
<1> _AxS_, but can't it be because of the shedelucher?
<0> ..and maybe watch 'dmesg' or '/var/log/messages' in a 3rd
<1> _AxS_, ok i will do that
<0> ruben_gonc: it can, and if it was then maybe it won't get slow.. :)
<3> ruben_gonc, if you get DMA timeouts, the kernel will turn DMA off. It may happen under heavy disk load
<1> i will try to do an emerge
<4> hello
<4> i am having problems with installing imq
<4> actually i have installed it but when i redirect traffic to the imq devices it just dosn't work ... and the imq's have 0 bytes in 0 out
<1> _AxS_, well...emerge isn't getting so much resources....the system is fast..but it won't be past a time
<4> is there some tutorials on installing imq on gentoo ?
<0> ruben_gonc: keep watching it.. i'll bet it'll get slow with system resources shoot way up.. and like needy said check dma with hdparm once that happens too
<0> s/needy/neddy
<0> glontu: if its a configuration issue then it's probably the same on any linux distro -- just google for a howto
<5> hi
<6> glontu, what is imq?
<7> how do i test the speed of my USB disk?
<5> i got a problem with x11 ... when i execute startx my two screens turn black, make that standard crc monitor *clack* and i get thrown back to my terminal with the error 'must be connected to a terminal' from startx
<1> _AxS_, the system is getting slower but dma is still on....and top is normal
<7> i'm not sure it's using 2.0
<5> i've never seen that error - does anyone know what i could do?
<7> i feels kind of slow
<1> I will try to use antecipatory shedelucher as default
<1> if it doens work i will have to forget gentoo
<0> ruben_gonc: what preempt model are you using?
<1> _AxS_, where ca i see that?
<0> ruben_gonc: its in the kernel config..
<8> howdy
<1> _AxS_, processor types and features?
<9> Why the crap is kwin not installed when I emerge kde 3.5.2?
<10> What can I use as a sound-server?
<1> _AxS_, voluntary
<6> Kijutsu, how did you install kde?
<0> averagecoder: man make.conf and look up USE_ORDER -- you can specify what default use flag groups, etc. get used there.
<0> ruben_gonc: hm 'k. that should be fine.
<11> anyone have the last.fm player installed? why does it need apache ?
<8> Anyone got problems with glibc 2.4-r1? failed to build here :o
<9> kojiro: added all the kdebase 3.5.2 packages to /usr/portage/package.keywords and ran emerge kde
<6> um
<0> bucky5: do you have alache or apache2 in your USE ?
<0> bucky5: emerge --info
<6> Kijutsu, can I see your package.keywords?
<1> _AxS_, do I choose antecipatory as default?
<9> kojiro: it's a mile long
<0> ruben_gonc: yeah do that
<2> hmm its rare to use mutt i guesse
<6> Kijutsu, use pastebin.ca
<9> kojiro: just a moment
<12> anyone running steam in wine?
<3> exoduz, I use mutt sometimes - ask your question#
<11> _AxS_, wierd... i dont have it in my use, but when i do use="-apache2" it doesnt require it
<2> NeddySeagoon my fetchmail is oke i suppose it connects etc and my procmail seems to work proper aswell but i dont see anything in mutt etc
<13> is there anyway to have only the devices found in /dev ?
<0> bucky5: does it show in 'emerge --info' ? theres a lot of default use flags that aren't in make.conf
<14> when I boot up my kernel, it tells me that it can't load the root fs on unknown block (8,3)
<13> eg. i dont want hde to hdg or what not
<11> _AxS_, but it still wants to install apr..the apache portable runtime library
<1> _AxS_, well..it is compiling....then we will see the results... What shedelucher are you using?
<3> exoduz, I use it with qmail. I dont use procmail or fetchmail - sorry
<8> http://pastebin.com/656015 <- anyone got a clue about that?
<11> _AxS_, yea it shows it in --info
<0> ruben_gonc: deadline
<15> fixed the blank screen problem with kernel-2.6.15-r1 - unmask and emerge latest nvidia drivers
<1> _AxS_, why?
<15> latest nvidia drivers don't work with 2.6.11-r4 tho
<15> but I'm happy now
<0> ruben_gonc: 'cause i like it.. :) I do a lot of database work with mys sytems and once upon a time it said it was recommended fror databases/servers... I don't find i take much of a performance hit by using it, so i keep it
<16> what perl package provides Date/Manip.pm
<0> ruben_gonc: i also run with no preeempt.
<9> kojiro: http://pastebin.com/656019
<1> _AxS_, ok..as i dont use databases
<17> henrik_: it looks like you need to use a later gcc from the error output
<0> ruben_gonc: anticipatory is probably what that other distro was using, so that's why i recommend going to that.
<6> Kijutsu, and you ran emerge kde ?
<9> kojiro: i did
<6> Kijutsu, not kde-meta or something else?
<8> HamishTPB: hmm, but i got 3.3.6
<9> kojiro: kde-meta? no
<17> henrik_: yes and it said that was bad in the configure stage..
<14> when I boot up my kernel, it tells me that it can't load the root fs on unknown block (8,3)
<6> Kijutsu, then kwin is installed, but it's part of a larger package
<0> ruben_gonc: what kernel version are you working from, btw?
<8> HamishTPB: yeah i saw
<1> _AxS_, well...in FC5 I had the default...i don't know what it was...and it ran well....in Archlinux..I had a costumized kernel with c/q io..:S
<9> kojiro: then why is it complaining that kwin isn't installed when I attempt to enable Composite?
<1> _AxS_, 2.6.16-r1
<18> seren: DateManip
<0> ooh, that's cutting edge... what about trying a 2.6.15? might work better
<1> _AxS_, i used it in Fedora without problems...
<6> Kijutsu, are you sure kde finished compiling completely?
<1> _AxS_, but it can do the diffetence?
<9> kojiro: 78 of 78 packages completed according to the emerge
<11> are there any other last.fm players, or plugins for xmms to play last.fm?
<0> yeah some kernel versions are better than others..
<16> RypPn: thx, obvious question, should have searched =)
<19> i just noticed a problem, i have 1.5gb of ram but linux is only seeing under 1gb. am i missing a config setting or something?
<8> HamishTPB: should i try gcc3.4.6 ?
<0> BlackBsd: did you turn on highmem?
<16> henrik_: try gcc 4.1.0
<0> (in your kernel)
<8> seren: I dont want to
<19> _AxS_ i dont know i used genkernel
<19> about a year ago
<19> so i have not known this for awhile
<1> _AxS_, well...will try the antecipatory...if it don't works will try 2.6.15....if it don't works...will try...something
<0> BlackBsd: ...genkernel might not by default.. zgrep HIGHMEM /proc/config.gz
<20> so I'm up a creek with no emerge after updating portage
<20> at least that what I _think_ is going on
<0> ruben_gonc: there's no errors showing up in dmesg or anything like that, then its slowing down is there?
<19> _AxS_ ***uming it dont, do i have to recompile?
<0> s/then/when/
<6> kados, what version of portage?
<9> kojiro: it seems I've stumped you.
<20> is there some way I can re-install emerge?
<0> BlackBsd: yep
<20> kojiro: I just did emerge --sync
<1> _AxS_, no errors:S
<19> thanks
<0> kados: emerge portage
<20> kojiro: then emerge portage
<20> emerge command not found
<1> _AxS_, it seems all good
<20> and it's not in /usr/bin
<14> _AxS_: when I boot up my kernel, it tells me that it can't load the root fs on unknown block (8,3)
<21> daddysmurf check your bootloader settings
<6> kados, did you reboot at all during those steps?
<14> I did
<22> i have a problem with a module (acx). on load dmesg says acx: Unknown symbol wireless_send_event
<22> acx: Unknown symbol iw_handler_get_spy
<22> acx: Unknown symbol iw_handler_set_thrspy
<1> _AxS_, 2.6.15 is compatible with the last udev isn't it?
<0> daddysmurf: hm ok so it can't find the partition or it doesn't recognize the filesystem...
<20> kojiro: well ... emerge completely hung my system
<14> Nazz: when I change it to the only other possible option, it says my root= is wrong
<0> ruben_gonc: sure is
<20> kojiro: and I was forced to reboot
Return to
#gentoo
or
Go to some related
logs:
mysql workbench PKG_CONFIG_PATH
udevstart
qam 256 decrypt comcast
#css
mysql moving average udf
java.net.BindException: Address already in use:8180
dropdrive
value of htmlspanelement
kevix
psybnc darwin
|
|