| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59
Comments:
<0> ty
<1> Does anybody know how to disable the plain text login method in courier-imap ("P***word" as per evolution)? CRAM-MD5 challenge response is a little better ;) ?
<2> hi all, tring to install gentoo with a network connection to a pc that's connected to the net...but first i can't seem to get
<2> them communicating
<3> damn
<2> am i using the wrong type of cable? Should i be using a crossover cable?
<4> mabus: grml can be console or X - there's a minimal version which is very minimal - austrumi (latvian/english) is X and very light
<5> noimnot: save your /usr/src/linux/.config, remove the kernel sources, emerge gentoo-sources and rebuild the kernel.
<3> kernel panic after starting up X with fglrx module :-S
<6> ahh nanobanshee look:
<6> $ /sbin/lsmod -V
<6> Usage: lsmod
<6> its.....
<5> noimnot: if you get symbol errors and strange modules loading problems, you need a fresh build.
<6> of the kernel?
<5> noimnot: yes.
<7> shikamaru85, direct connections between computers need crossover cables; if u use a switch, then you can take normal cables
<6> hm..
<6> nanobanshee: been doing that atleast 5 times now
<8> Time for bed.
<0> I'm going to make a gentoo kernel and put it on a usb key w/o x, so I can put that in when I'm having a bad day and remember how much worse it used to be
<5> noimnot: you did a fresh build and got alsa symbol errors?
<6> umm no
<2> flurischt: so in this situation (serving net from one pc to another) crossover is the right choise right?
<6> now its not about the symbol errors anmore
<6> but about lsmod segfaulting
<6> then haning there -> zombie
<6> hanging*
<8> Thanks everyone.
<7> shikamaru85, i would say..
<9> hi
<2> flurischt: thanks!
<5> noimnot: get a fresh emerge of sys-apps/module-init-tools
<6> the symbol errors disappeared when the lsmod error appeared nanobanshee
<6> nanobanshee: did that half an hour ago
<6> actually thats what my research this night brought up
<6> and the reason why im here is that it didnt work :<
<10> anyone knows how to get an a4tech wop35 mouse to work??
<6> neither removing also nor reinstalling moduleutils
<10> it has 2 scroll wheels and 5 mousebuttons
<6> but can someone tell me how to "not" load the opengl driver at bootup?
<6> making sure its not it could help alot
<8> The next *big* project I think is trying to get my Palm to work. Maybe it's almost trivial.
<0> Jessica1: work w/ linux, or just come alive?
<5> noimnot: check in /etc/modules.autoload.d/*
<9> is there a way to unmask in package.keywords specific versions of an app ? like appversion-1.2.3 ( but what i want is it to unmask only that version and its -r? releases ... , so appversion-1.2.3 is unmasked and also appversion-1.2.3-r1 and above ( but no appversion-1.2.4 or appversion-1.2.3.1 )
<11> hi, where is the log file of people ssh in to my computer ?
<8> daddysmurf, work in kde integrating with korganiser and other KDE components.
<4> Yagami: ~app-1.2.3 i think
<8> It's working fine on it's onw.
<8> s/onw/own/
<0> Jessica1: haha, good luck, I've yet to get mine to sync up w/ linux
<6> no nanobanshee :8
<5> snow_ru: grep sshd /var/log/messages
<6> nothing there..
<6> i know i modprobed fglxsomething once
<5> noimnot: I really suggest doing a fresh kernel build without the opengl, and then adding it in later as a module.
<12> Hi peeps. Quick question: when the docs say the use flag kdeenablefinal takes up a lot of memory, do they mean when KDE is running or during compilation? And what is a lot?
<6> right..
<6> thats what it's supposed to be now :y
<9> juckes: is it also possible to do to package.keywords like css ? making package.keywords just read package_Xorg7.keywords and package_kde-5.2.keywords
<6> it should be loaded at bootup
<6> and i suspect it to be the reason for all the segfault
<5> noimnot: no. I mean don't build it at first.
<13> Hello
<8> daddysmurf, I've been able to get three different ones to sync up with Linux on at least three different machines, I believe one on two different machines, one machine syncing with two Palm devices. It's not that difficult if you start looking for the documentation. There are a number of things you have to setup though. It's *not* one of those plug and play type things, at least not in Gentoo.
<4> Yagami: i don't know that - good idea though
<5> noimnot: test your kernel before the ati-driver stuff is linked in.
<13> Can anybody help with apache 2.2.0 ?? I'm doing a fresh install and I can't get it to work. The server starts just fine.
<13> But
<13> Accessing the web site gives me a 403 error
<13> . I tried creating .htaccess files and changing the default vhost, but to no avail
<14> whats the easiest way to set up xorg 7 automatically
<14> is there a prog to set a a xorg.conf?
<6> nanobanshee: only problem not sure its loaded yet
<13> Hello
<6> i cant lsmod, remember? ;)
<13> Can anybody help with apache ?
<15> any kind person who can help me? please read my post: http://forums.gentoo.org/viewtopic-t-452885-highlight-.html
<6> and its a fresh build (just the first time i booted this build)
<6> im just not sure if it loads the driver at bootup
<6> also if so; where :<
<5> noimnot: yes, but it has ati-driver in it, correct?
<14> whats the command to automatically create a xorg.conf file?
<6> nanobanshee: ummm no not really
<5> ITguru: Xorg -configure
<14> thanks
<6> not per config
<16> Hello.
<14> lol it cant detect my mouse
<16> Has anyone managed to run matplotlib with -gtk USE setting?
<6> i emerged ati-drivers, made sure the kernel matches the prerequisites..
<17> I'm using a debian rescue system in a gentoo hardened system, I booted, mounted all partitions, but when I tried to chroot /mnt/gentoo I got "Bus Error" someone know why? how can I solve this?
<16> It emerges ok, but wants to load gtk python libraries anyway.
<5> noimnot: build a fresh kernel without ati-drivers.
<6> well..
<14> it works other than my mouse!!!
<16> ice`work: bus error sounds serious. Might be a hardware failure.
<6> i dont have ati-drivers in this kernel afaik
<6> all i did was modprobing fglxsomething once
<6> and switching to the ati version of opengl
<5> noimnot: have you tried re=booting?
<17> yess, hummm.. a failure in my HD?
<6> haha
<6> several times, yeah
<6> its soo weird
<6> lsmod segfaulting :X
<0> where can I get a sage 4 tarball?
<18> herbs.gentoo.org
<0> ty
<4> goldfish++
<18> (it was a joke)
<0> I see that
<0> can you not get the stage 4?
<0> it's not 4-20 yet, i don't get it
<6> nanobanshee: could this help?: http://rafb.net/paste/results/t5TEmS51.html
<14> whats the protocal for a logitech usb mouse?
<6> nanobanshee: look at line 7
<0> where can I get a sage 4 tarball?
<9> juckes: perfect , just what i wanted !! i have been doing it by =appversion-1.2.3* but that didnt work really like i wanted ... many thanx
<4> daddysmurf: stage 4 is a backup you make of your own system
<4> Yagami: :)
<0> damnit...
<5> noimnot: yes. it helps. it tells me you need a fresh kernel build without ati-drivers.
<19> ITguru: IMPS/2
<0> I was getting all excited when I heard someone mention that...
<18> daddysmurf: *stage
<6> hah
<6> that sounds great
<0> goldfish: ??
<4> daddysmurf: but what you really want is a stage 5
<18> juckes: heh
<6> at least better than reinstalling the whole system
<18> daddysmurf: Stage, not sage. no?
<0> oh, yea
<0> juckes: you're welcome to quit making an *** out of me any time
<4> thx
<20> hi people, someone here use an ATI X200 graphic card and have 3d acceleration?
<21> when using mesa 6.5 i have no hardware acceleration, but it works fine with 6.4.2 - when trying to start xgl it looks like the i915 driver is used instead of i810 - any ideas to what might be wrong?
<0> I'm gonna go nuts if I don't get a graphical screen...
<20> daddysmurf: text browsers are cool :) (W elinks)
<22> Question: How come when I change a setting in konsole (kde) the settings wont save? I want to change the background colour, but always reverts back to black on white.
<4> daddysmurf: have you got app-misc/screen yet ?
<23> Hi. When doing 'emerge -puv mysql' it shows: "[ebuild U ] dev-db/mysql-4.1.14-r1 [4.1.14] USE="berkdb perl ssl -big-tables -cluster -debug -embedded% -extraengine -minimal -raid% -srvdir% -static" 16,684 kB". What does the keywords followed by a percent sign mean?
<23> They show up as yellow.
<24> eye69, I believe they are new use flags
<4> new use flags
<23> So new for this version?
<21> Aurvandill: you have to save the settings..
<21> "save session" i think
Return to
#gentoo
or
Go to some related
logs:
#perl
xorg.conf barcode scanner
firefox appendChild segmentation fault
averatec compatibilities
#lisp
#sed
+sitecustomize +py2exe
suspend to ram linux asus a6
#math
vchkpw-smtp
|
|