| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
Comments:
<0> hi yall doin?
<1> thus, the fan is constantly blowing on full speed, draining the battery quickly.
<1> how do I change the governor?
<2> fyrestrtr, i always had problems with freq scaling (HP pavilion). .. the only way i could get it to work was catting to the /proc entries
<0> I got my AMD64 scaling with powernowd
<2> fyrestrtr, the exact details, i cant recall i'm afriad
<1> well I don't know how, but on ubuntu it worked.
<0> fyrestrtr, emerge cpudyn
<0> then edit /etc/conf.d/cpudyn
<0> then run /etc/init.d/cpudyn start
<0> that should get ya started
<1> with that, it scales -- but I need to read up on how to configure it properly.
<3> what do I have to emerge to get locate to work?
<1> it goes from 800 Mhz -> 2 Ghz, but nothing in between.
<0> it might even drop down after it hits 2Ghz, my AMD64 was doing that
<1> yeah I noticed that, it spikes up to 2Ghz, then drops down to 800 Mhz.
<4> IamEthos: `emerge locate`, then run `updatedb`
<0> mine was spiking to 2.4Ghz then dropping to 1.75Ghz then back to 1Ghz when the load was gone
<0> but now it goes up slowly as needed
<0> never peaks
<3> shiznix, no packages to satisfy locate
<1> IamEthos: emerge slocate
<4> IamEthos: aah...probably been removed in favour of the more secure slocate
<3> okay
<3> next question
<3> I've unmerged apache like 100000 times
<3> and nothing happens
<3> it is still here
<5> hey fellas.
<3> I just emerged it today
<3> didn't use any keywords
<0> I'm trying to chroot into an AMD64 system from X86
<0> I get
<0> chroot: cannot run command `/bin/bash' : Exec format error
<5> Question: With KDE muted, firefox 1.5 still 'beeps' when my search returns no results. How do I fix that?
<6> is it beeping through the pc speaker?
<5> arfy: yes
<0> clocksarestupid, you might try "xset -b"
<6> thought so, well in that case, muting the sound card won't make a diffeence
<4> IamEthos: you mean it's still running, or the files it emerged are still present on your system ?
<6> difference
<7> [AMD64] I get a md5 verification miss on /usr/portage/distfiles/docbkx412.zip - anyone else?
<1> arfy: I never compile in pc speaker support :)
<5> widge: is that in an X11 config file?
<3> the files are still here
<3> it's not even broken
<8> lm_sensors-2.9.2 requires CONFIG_HWMON to be enabled for 2.6.14+ kernels.
<8> <-- is this from kernel config or the actual running kernel?
<3> I've tried unmerging it a few time
<3> s
<0> clocksarestupid, it's from the command line
<5> widge: xset -b fixed it.
<3> it was still runningduring a few
<5> widge: will i need to run that every boot, or is there a place i can put that to fix it?
<0> clocksarestupid, should be in xorg.conf
<4> IamEthos: odd, not had that before :/
<5> widge: where in xorg.conf?
<0> clocksarestupid, in man xorg.conf
<6> lol
<5> widge: i'm not seeing a man section - can you be more specific... i'm sorry, i'm new to gentoo
<3> ooh
<3> goody
<3> now /etc/init.d/apache2 stop isn't stopping apache
<9> Hi there, If I unmerge something after stopping an emerge -e world, will an emerge --resume still do the world emerge?
<10> omega21: no
<0> clocksarestupid, just type "man xorg.conf" at the command line
<0> then use your "/" to search for "xset"
<0> "/xset" and hit enter
<10> omega21: try pye
<11> omega21: When I do that I make a backup of /var/log/emerge.log then... uh... "edit" history a little
<9> seren, pye?
<10> !google gentoo-forums pick your emerge
<12> http://forums.gentoo.org/viewtopic.php?t=135968
<9> Ferret: so just remove the unmerge from the history?
<11> Yus :)
<10> no
<10> Ferret: really
<11> ***uming --resume still works that way
<9> its trying to build metisse and it wont compile.
<10> Ferret: i didnt know thats how it worked
<13> dont hate me because i'm ***y
<10> omega21: try that, if it dosent work try pye
<9> I tried echo "x11-wm/metisse" >> /etc/portage/package.mask and it didnt work
<9> what is pye?
<3> okay
<3> the plot thickens
<3> apache won't stop
<3> because it's claiming there is an error in my configuration files
<3> * Apache2 has detected a syntax error in your configuration files:
<3> env: /usr/sbin/apache2: No such file or directory
<14> hi how can i get svn?
<3> yet
<3> I can't find the config file that mentions /usr/sbin/apache2
<9> ???
<15> look for anything in /etc/apache2
<1> hawking: emerge subversion
<14> thx
<9> seren: It didn't work, what is pye?
<10> !google gentoo-forums pick your emerge
<12> http://forums.gentoo.org/viewtopic.php?t=135968
<9> seren: pye seems a little difficult, is there a way to safely remove metisse from the world file?
<10> omega21: idk
<9> kk
<9> does anyone else know?\
<16> hi, what is the right way to have an usb mouse working under x ?
<17> anyone here done data recovery on a windows system via linux?
<17> I just deleted 3 files I need
<17> :(
<18> BabaLi: you will need to confirm the mouse works. cat /dev/psaux move mouse. ctrl+c to stop
<19> Alrighty, I'm gonna try yet again with the same problem I came in earlier.. I have a running machine that I'm trying to install a smartlink modem
<20> most likely /dev/input/mice for usb
<18> BabaLi: actually, it might not be psaux anymore
<16> thechris, hehe good morning thechris :) it was just to know for my friend
<16> thechris, hi comp is down now :-)
<21> Tussey, do a google for a program called...restoration I think it was
<19> I've compile the ebuild successfully, and probed the ttys to make sure that I got the right one with setserial for the configs in /etc/conf.d/slmodem, which has been described as a second portion of the install.
<18> BabaLi: oh, heh, didn't recognize the name at first
<16> :)
<21> Tussey, it's a Windows program by the way
<19> lsmod shows that it's loaded, but not being used at any given point and time
<18> Say, anyone know how to get objc support in gcc. i've tried the use flag. the compile fails with "cannot find gc.h"
<17> ty
<21> Tussey, np
<19> it doesn't matter which utility I use; wfdial, ppp, etc... none of them seem to initialize the driver
<19> wvdial*
<3> okay, whenever I run grep
<3> it just sits there for a loooooooooong time
<19> IamEthos, it's expecting something for the grep comment
<18> IamEthos: did you specify a file?
<19> grep is purly an output type of program
<19> purely*
<21> IamEthos, are you closing all quotes? are you escaping quotes where necessary?
<22> cashmoney: You can pipe data into grep but it isn't interactive.
<19> RiverDude, which is why he needs to specify what he wants grepped lol sorta speak
<19> or else it freezes as an option output or something like that
<19> I'm a bit exhausted right now. lol.. I just want some help with a modem problem
<19> I want out of doze lol
<19> the modem drivers load, they just aren't being initiated
<19> could it be a permissions thing?
<23> hmmm...is it still ACCEPT_KEYWORDS="~x86" on an AMD64 system, or something else?
<6> hay, is there a way to find out how much will be downloaded when a package is emerged?
<6> like for instanc,e gnome?
<6> instance
<19> emgentoox, I think that's incorrect, but I'm not sure. I think you need to unmask it the the /etc/portage/package.keywords
<21> arfy, emerge -p <package>
<21> or emerge -a <package>
<21> -t and -v are also helpful
<6> ok thx
<21> np
<23> It's ~amd64
Return to
#gentoo
or
Go to some related
logs:
#centos
#css
ubuntu dwl-122 dapper
fluxspace deb
javascript fake referrer
libc6-amd64 etch
#debian
emerge audacious-themes
uescape perl
oygkm
|
|