| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57
Comments:
<0> oticon6: oh sorry I didn't notice you were speaking about setting up a server
<1> dli: says WARNING: Error inserting ieee80211 (/lib/modules/2.6.15-gentoo-r1/net/ieee80211/ieee80211.ko): Unknown symbol in module, or unknown parameter (see dmesg)
<0> my appologies
<2> llucas: It might be worth mentioning that if i plug a regular keyboard in as well as my usb one, my usb one works
<3> TimeZer0: No prob
<2> even though it isnt displayed in dmesg
<4> in /etc/conf.d/dhcp << is where you tell it to listen on a specific nic
<5> Mikey: make sure to set the options as given in the howto
<6> Hi, just "sticking my toe" into the Linux pool and am considering Ubuntu but keep hearing about Gentoo ..any thoughts to help me sort it out?
<2> so i'm guessing it's not nesserily a USB problem *re-looks at the guide anyway*
<4> oticon6: IFACE="eth0"
<7> |Mikey|: if the livecd kernel works for you boot it, run gzip -d /proc/config.gz > /mnt/gentoo/usr/src/linux/.config
<8> !seen gli
<9> MKc, I don't remember seeing gli.
<10> I've never seen a 'gli', sorry.
<11> Anyone know how to turn on the color in the links browser?
<3> D1A: Well that was a bit of an oversight. Upon finding /etc/dhcp/dhcpd.conf I didn't even think to check in conf.d for another config file. Thanks, that's what I was after
<5> wide-eye: zcat is your friend :)
<4> oticon6: or in your case eth1, and then just rc-update add dhcpd default
<8> im back .. who wanna help me with 3Com card installation via SSH? :]
<2> wide-eye: wouldn't that give me a m***ive genkernel-type config?
<7> |Mikey|: then you can make oldconfig, then finish installking the kernel by hand
<7> |Mikey|: yes, but it works...you could check the diff's if you like
<2> hmm
<2> true
<1> dli: should I just do a fresh install?
<5> Mikey: did you make sure you've got all of the same options set as in the howto?
<11> I can't google for how to turn on the color in the links browser of course.
<2> yup
<11> They chose a stupid name for their browser.
<2> Well, the one's i need.. ie. minus realtek eth stuff
<5> MIkey: and do you have coldplug emerged and in a runlevel
<2> should do, i'll check next reboot
<2> but, its not just usb that doesnt work
<2> its the onboard eth
<2> and it's those regions that are failling >.<
<12> mtylerb, are you are livecd?
<5> what nic
<2> nForce2 onboard
<2> i included forcedeth
<5> yeah whats the chipset
<2> one moment =D
<5> is it an actual nvidia card...it could be a marvell or a few others
<13> Hey, how do I see the DHCP ***igned network address?
<14> ifconfig?
<13> I'm using gentoo atm, and I need to find my netaddy.
<13> No
<2> nVidia nForce Networking Controller
<2> Actually on the motherboard
<13> The addy in ifconfig is the non DHCP addy
<1> dli: no, it's installed on the hdd... i have the cd to install with...
<14> weird.
<13> Since I have it set up for non-dhcp at home, but that IP is not accessible excetp to me
<13> It just worked, which is kinda weird.
<13> I didn't have to set up dHCP at all >_>
<5> Mikey: k just making sure, my asus nf2 had a marvell.... and :(
<2> heh
<2> the livecd seems to use forcedeth
<13> Any other ideas on an easy way to send a file to a windows rig at a m***ive lan?
<2> lsmod doesn't show it
<2> but dmesg | grep 'eth0' does
<15> hi
<13> Beacuse unless I know the addy of my gentoo box, I can't scp in or anything
<2> it goes eth0: forcedeth registerd device..
<2> or something
<5> Mikey: yeah thats right im using it with a DFI nF4 board as we speak....forcedeth is pretty stable now
<12> mtylerb, are you useing the ipw2200 package?
<1> i did emerge ipw2200...
<2> It's just that my nic is at 0000:00:14:00 or w/e it seems
<1> does that mean I'm using it?
<14> ok.
<2> but my kernel says "can't allocate region 0 at..."
<2> for the nic, and some other addresses
<2> one of which i ***ume is usb... I'll confirm when i reboot
<2> am I missing an AGP controller or something?
<7> GentooRami: are the 2 comps on the same network?
<12> mtylerb, emerge -C net-wireless/ieee80211 net-wireless/ipw2200
<7> or over the net?
<1> that removes them right?
<14> mikey, i had that same problem.
<12> mtylerb, go to your kernel folder, make menuconfig to select ipw2200
<8> hello guys, i need some help with checkin if my netcard config is fine. Someone skilled with 3Com cards there?
<5> Mikey; do you have plug and play set in the kernel?
<12> mtylerb, I thought you were told to use the kernel driver
<13> wide-eye: yeah
<2> its odd, I installed amd64 installed on here the other week.. worked fine (apart from my wlan driver wouldnt work for 64bit) so i switched to x86
<2> and got this
<13> I'm at a 150 person lan atm.
<2> I think so
<13> And we're all connected to one network.
<2> tell you what, i'll reboot
<2> copy my .config, lspci and stuff across
<8> dli: hallo
<2> i only have my dmesg here
<5> Mikey: how did you install amd64 on a nf2?
<7> GentooRami: then ifconfig shows it, but you may be using the same ip as someone else without dhcp
<12> MKc, yes
<8> dli: wanna check my 3c900?
<2> ugh...
<13> Oh, hm, wide-eye .
<12> MKc, pm me
<2> maybe its an nforce3 >.<
<2> its got an AMD Sempron 64 on it
<7> GentooRami: try pinging the ip listed in ifconfig do you get dups?
<13> Yeah, I just di
<13> d
<13> Doesn't work
<2> I have no idea... do nForce2's not allow that?
<13> Well, from a third box
<2> duper: Did you fix it?
<13> pinging 192.168.0.128 doesn't yield anything
<13> Locally, it works fine
<14> mikey, i upgraded to kernel 2.6.11.2 vanilla and emerged to ipw2200-1.0.10 (downgraded)
<14> upgrade kernel, downgrade driver. ;)
<7> GentooRami: run /etc/init.d/net.eth0 stop, then dhclient eth0 ...that might work
<5> Mikey: I thought that nf2 was the Athlon boards...462 pin. im not real up on it though, so it could be
<14> plus i did some stuff in procfs like it says on ipw2200.sf.net
<14> something about the firmware timeout
<13> Okay, I'll try it wide-eye. If I get disconnected... well you know what happened :P
<14> everything worked fine until i upgraded my kernel.. then i had to do all that.
<2> hmm
<13> Erm, dhclient != valid command, do I have to emerge a package?
<14> on an ibm thinkpad t42p
<2> gentoo-sources-2.6.15-r1
<7> huh? wait your on that box now?
<2> i think thats what im running
<14> ipw2200-1.0.10
<13> wide-eye: I'm on the gentoo box right now.
<13> Dhclient yields command not found.
<14> emerge -a =ipw2200-1.0.10
<13> Keep in mind, I never use DHCP >_>
<7> ok the router may be generous, try dhcpcd
<13> dAlso CNF
<13> er, command not found
<2> right, i'll try that with my current kernel
<2> and i'll return with .config and lspci :)
<7> GentooRami: ok just emerge dhcp
<2> bbs
<13> kk, wide-eye.
<7> GentooRami: then run the dhcpcd eth0 with your init script off
<13> Okay, thanks. I'll try it after gaim is done emerging.
<13> [Hopefully]
<5> can you mix -r* versions of gcc with distcc?
<7> llucas: usually yes, -r's are generally bug fixes, not big changes
<5> wide-eye: excellent. ive got a few stable servers that could lend a hand for my ~x86's :)
<16> Hey all, having a problem with the x86 minimal install, the text is off the bottom of my screen :\
<5> DoctorX: disable framebuffer
<17> i had a samba firewall problem, even when i opened the right ports... im connected through a router... i added the router ip to "allow connections from host" (iptables), and now it works (i think...),,, is it unsafe to do that?
<7> GentooRami: if you have time you might want to look at the setup for dhcp in the handbook, it's pretty simple to switch back if you just # comment your current setup
Return to
#gentoo
or
Go to some related
logs:
ubuntu fschk not found
gdm.conf-custom restore ubuntu
#suse
FreeFontPath vnc
counterstrike varnames
test opengl suse linux gear
#perl
/opt/e17/bin/enlightenment not found for e17
tightvncserver vnc4server
#lisp
|
|