| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55
Comments:
<0> Valombre, what was your question about?
<1> ReiZer: remove it from /etc/modules.autoload.d/kernel-2.6
<2> what should i do to have the ati-drivers installed
<1> Chani: then mask those packages
<3> mark_alec: I'm not sure which packages got updated to 7.1 and which didn't, right now
<4> mark_alec: thank you
<5> power1 : That is 5% you lost. Wich is reserved for root. You can tune it with the -m parameter when creating it. Also the 300GB are in 1000 units so it's actually 279GiB
<2> when i try, it does that : http://tgl0be.org/paste/?id=1497
<1> ReiZer: look through 'qlop -l' and see which have been emerged
<6> i'm trying to set up a dhcp server on my box, but when i try to start up the init.d script for it, it asks me to run depscan.sh
<7> power1: you can also use tune2fs -m 1 now to set the reserved space for root to 1% of the capacity, i think
<0> Volstrup, you tried the one distributed by gentoo, or?
<4> mark_alec: i've already removed it from there should i remove them from the /lib?
<5> power1 : but use tune2fs with that partition unmounted.
<2> :(
<8> Valombre: it's telling you that you're missing a kernel module
<9> sirpreis, Luthien is ther danger in bringing the journal down to 1%
<1> ReiZer: it shouldn't be automatically loaded if you have removed it from there
<1> ReiZer: are you running coldplug?
<4> mark_alec: yes
<10> gahh, I don't know what I'm supposed to mask if I want to downgrade to xorg7.0
<1> ReiZer: remove it from the default runlevel and that should stop it from being loaded
<2> i d'ont see it Raw :/
<4> mark_alec: problem is that i've never set it with rc-update
<5> power1 : not really. You can it set to 0% if you wish to. But ext3 tends to have some fragmentation issues when almost full, reserving a 1% or 5% helps agains that, it also ensures that your system won't lock if an important system process needs HD and it is full.
<4> mark_alec: it's from the first time i've booted the linux
<8> Valombre: http://forums.gentoo.org/viewtopic-t-428654.html
<1> ReiZer: pastebin `rc-update show`
<7> power1: i always set it to 1%
<11> can someone tell me why e. g. konsole in kde-3.5.2 has such a slow text-output when it autoscrolls?
<8> Valombre: read that, it'll help you
<2> ok, thanks
<3> hmmm.
<12> hi, i got eight errors towards the end of my install log, and yet it said that installation was complete... where can I post these errors so that someone could tell me not to panic? =P
<8> Valombre: not every post will help you, but read through and follow the suggestions, specifically the ones regarding the kernel
<9> Luthien, thanks man...
<12> (pastebin.com does not seem to work)
<3> I guess I could remove nvidia-glx for now to resolve the block. I just hope nothing gets weirdly broken.
<9> sirpreis, and u had no problems at 1 % ever?
<8> Valombre: found you something even better: http://gentoo-wiki.com/HOWTO_ATI_Drivers
<8> Valombre: step by step setup, enjoy
<7> power1: no, i don't think so
<4> mark_alec: esound is the only thing that mentions sound in there
<1> ReiZer: that wouldn't cause the module to try to load though
<3> viper: http://en.wikipedia.org/wiki/Pastebin
<3> viper: GIYF ;)
<4> mark_alec: if i remove it from the /lib/modules... would that solve the problem
<13> Anybody else had a problem with text disapearing?
<14> viper: sh.nu/p
<13> on kde
<13> menus
<13> buttons
<1> ReiZer: test it out, i am not sure
<4> mark_alec: ok thx
<15> moin
<16> how exectly should i enable mbstring in php --> i add mbstring to package.use anf mage another emerge but still doesn't work
<12> chaosite: thx, nice site;
<12> ok, my eight install errors are at http://sh.nu/p/1977
<17> EvilDin: if you don't get help here, it might be worth trying #gentoo-php
<2> rethanks raw :p
<11> can someone tell me why e. g. konsole in kde-3.5.2 has such a slow text-output when it autoscrolls? i don't have the problem on gnome-terminal
<8> Valombre: no problem hehe ;)
<12> they're basically the same type of errors -- failure to add x because it was not found; could not add x (bad source code)
<8> t|zz: because konsole ****s, use aterm or eterm
<8> ;)
<2> ah yeah, there's a problem in fact
<18> >:o
<2> in the kernel config, i can't compile the agp support for my chipset nvidia
<2> there's just intel chipset support in the list
<11> raw: i heard too, but konsole run without those probs on kde 3.4.x
<16> hm why gentoo install mysql version 4.1 and not 5
<10> (T_T) Could someone tell me exactly how to downgrade xorg to 7.0??
<12> would someone like to just have a quick chat about those errors in another channel?
<0> is encrypting the hdd slowing the system down?
<8> Valombre: don't skip compiling the chipset and compile all the other stuff they say to
<10> I've been trying to find some info and i've read the masking sektion in the handbook
<10> I've tried doing it myself
<10> It just wont work'
<8> t|zz: not too sure, but I've always found Konsole to be slow, and bulky, just not as slow as you describe, in any case, switch to aterm and you'll be a happy man
<7> somehow my X crashes every few minutes... i did not have the problem before yesterday, i don't know, what its about. what could i do about that? downgrade the packages that were updated yesterday? rebuild everything that has to do with X?
<8> Valombre: I mean, just skip compiling the chipset (forget the don't)
<19> noteventime, Wht you need to mask depends on the drivers you have, as well as the X server itself
<19> noteventime, If you /j ##NeddySeagoon, I can show you my package.mask
<10> NeddySeagoon, I have Xorg 7.1 (following the tutorial in the documentation) and the vesa drivers, I want the nvidia drivers but they are'nt compatible with 7.1
<8> I'm still using kde 3.4 because I'm too lazy to upgrade to KDE 3.5 and then end up upgrading and reconfiguring a whole bunch of other stuff as a result of it, which I've had to do the last 3 times I've upgraded kde, and which people are always telling me shouldn't be required
<4> mark_alec: thank you it did work :)
<20> raw: nothing should be required :D
<1> ReiZer: glad i could be of ***istance
<8> Caster: quiet you
<21> Is there a way to specify the user apache runs as per virtual host?
<17> tw-nym: #gentoo-apache should be able to help you.
<8> my theme: http://www.dmon.org/graphics/screen.png but at higher res (since that was on my laptop, now it's on my desktop) and without the doom guy and the binary clock (and yes, I designed the wallpaper because I'm so great)
<21> doc|home: thanks.
<8> (I mean it's at a higher res on this comp)
<22> hello, i have installed gentoo linux 2.6.16 r9 on x86 without genkernel, and on my first boot, i got the error when bringing up eth0: No modules provide "dhcp" (dhcp_start) and "netmount" was not started
<8> www.dmon.org/graphics/nexusbg.jpg for the original full color background
<17> for off-topic chat, please use ##gentoo-pub or #otw
<8> my bad
<17> np
<22> did i forget something?
<23> is it a good idea to do cp /etc/make.conf.example /etc/make.conf ? Or it is recommended to make my own make.conf from scratch?
<8> oh, if anyone wants to know how to sync up an audiovox 8910 cellphone on a gentoo system with a data cable just ask, took me 6 hours total to figure it out
<24> good day
<22> btw, random small annoyance, the 49 mb installation cd from 2006.0 failed to load the dvorak keymaps and i was stuck with qwerty
<25> scast: _MAKE_ you own or expect some funny stuff going in with your system.
<23> kkk
<24> hell what is wrong with this graphical installer that every time it tries to emerge the system it breaks ?
<25> pressenter: #gentoo-installer
<26> hi
<24> rsk, ok, thanks
<23> I am installing. is it ok that i only have 4 variables?
<26> i just unmerged xorg-x11-6.9 and wanted to upgrade to 7.0, but when i emerge xorg-x11 it says xorg-server is blocked by nvidia-glx; but i can't unmerge glx nor xorg-server
<25> lugo: mask 7.1 and get 7.0
<21> Silvertear: are you using kernel level [network] autoconfiguration?
<27> lugo: why can't you unmerge nvidia-glx?
<25> lugo: nvidia and ati is broken in 7.1 some abichange..
<26> Griffon26: that's what i am asking you ;P
<8> lol
<22> tw-nym: sorry, i don't know what that means.
<8> as they said, mask 7.1 or it'll try to install 7.1 instead of 7.0
<27> lugo: you can probably do what rsk says, but not being able to unmerge is weird. What error msg do you get?
<22> tw-nymZ: i wrote my own /etc/conf.d/net or something like that
<8> and griffon is right, it shouldn't be blocking you from Umerging
<21> Silvertear: It's a kernel config option in networking. I can't see why the kernel would try to load anything named "dhcp" if you didn't have it enabled.
<26> boxxx lugo # emerge -C nvidia-glx
<26> --- Couldn't find nvidia-glx to unmerge.
<22> tw-nym: do i need to recompile?
<8> try emerging nvidia-glx, what happens?
<21> Oh, nm, did you install dhclient?
<22> tw-nym: should i do: emerge dhclient?
<26> boxxx lugo # emerge nvidia-glx
<26> Calculating dependencies ...done!
<26> !!! Error: the >=x11-base/xorg-server-1.0.99 package conflicts with another package.
<26> sorry for pasting
<26> will use pastebin for next >2 :)
<8> lugo...
<8> have you emerge sync'd very recently?
<26> ehm, yeah
<21> Silvertear: or dhcpcd.
<8> ok, mask the 7.1 as was said before then try
<3> y'know, this is the first time I've actually been inconvenienced by nvidia's proprietary drivers
<8> I've been inconvenienced by them for the last 3 months
<8> just finally figured out how to stop xorg from crashing all the time
<8> :P
<3> yipe.
<4> i have left with only one thing at boot lol Mkdir: Cannot create directory '/newroot/tmp/.initrd': Read-only file system
<4> how can i fix it not that it makes something just annoying
<3> I still don't understand how emerge can just forget that a package should be blocked.
<22> thank you tw-nym, i will try that now
<8> ReiZer: it's complaining that the filesystem is mounted as readonly, you have to figure out why lol
Return to
#gentoo
or
Go to some related
logs:
mysql left join empty rows
libglade-WARNING **: Could not load support for `gnome'
#web
#linuxhelp
find package x-window-system-dev
#css
ubuntu x11 ssh problem
rcsclean gentoo
#python
#perl
|
|
