| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
Comments:
<0> bonsaikitten: the CD in mixer?
<1> yairgo`: also double check and make sure your fglrx driver loads properly before trying to start x
<2> lspci as Agathezol
<3> hhaha, right, but I don't know what's broken so I can fix it, y'know?
<2> said
<4> srm: haah
<2> blyat,
<2> aticonf
<5> how do I mount a jump drive?
<6> when i do fglrxconfig my video card isnt on there
<7> never mind, thanks for your comments. good night
<8> pixolex, yes, or maybe the cable is reversed (silly manufacturers using the bad connector these days ...)
<2> and press enter in what you dunno lol, so it will apply the default
<9> It's been a long day. I fianlly got the nx overlay updated and a new release of FreeNX comes out. -_-'
<3> PlOy, aticonfig only inserts the necessary information into the xorg file, it doesn't build a new one
<0> bonsaikitten: it's not possible read it digitally? by the ide cable?
<10> yairgo`, mine sas that too, don't worry about the (WW) fglrx: No matching Device section for instance (BusID PCI:1:5:0) found , it's the (EE) u must fix
<8> pixolex, yes, but the simple cd-players don't do that
<6> Agathezol my lspci says 01:05.0 VGA compatible controller: ATI tech ........, that is pci 1:5:0 correct
<2> blyat, so, you should erase ur xorg.conf file then type xorgcfg --textmode
<11> im trying to do emerge -avuD --newuse world commands, but a lot of packages aren't being shown, despite there being new versions. how do i fix the system file and the world file to contain the right packages?
<2> blyat, so, you should erase ur xorg.conf file then type xorgcfg -textmode
<6> richiefrich the EE says no devices detected
<1> yairgo`: i believe so, yes
<1> yairgo`: next double check fglrx with lsmod
<6> then under it states Fatal server error: no scrrens found
<12> Hello, i'm trying to get my snes gamepad (rewired for a parallel port) to work in gentoo (kernel 2.6). I've tried compiling in the drivers for the joystick and the parallel port, but nothing seems to work. "cat /dev/input/js0" returns "no such device" every time... anyone have any ideas?
<10> yairgo`, u do a modprobe -f fglrx
<3> ok
<4> simmerz: maybe you unmerged some apps in portage, thus taking them out of the world file, now the deep does not catch it as a dep anymore.
<0> bonsaikitten: XMMS do that?
<8> pixolex, don't know, I don't have any CDs
<13> Can someone please describe what turning on the kernel options listed at http://gentoo-wiki.com/NTP#Use_ntpd_to_keep_your_clock_in_sync will do?
<6> richiefrich FATAL: Error inserting fglrx (/lib/modules/2.6.15-gentoo-r4/video/gflrx.ko): Operation not permitted
<0> bonsaikitten: lol!
<11> brianw: apps like k3b?
<2> yairgo`, you must give access
<10> yairgo`, diud u try modprobe -f fglrx?
<4> simmerz: is k3b in your world file?
<6> yeah thats the responce i got
<10> yairgo`, u root?
<11> brianw: it wasn't. it will be now seeing as i am emerging it separately again
<6> yes
<11> but it was installed
<6> fglrx.ko is rw-r--r--
<14> richiefrich: oke emerge e works now ^^
<14> richiefrich: with sourceforge =)
<11> brianw: i think regenworld messed it up last time
<14> *gg* =)
<15> yairgo`: have you compiled your kernel with support for loadable kernel modules?
<10> FreshPrince, cool
<4> simmerz: well you must of got it merged as a dep of something, then unmerged said app that brought it in as a dep
<6> stable im new and have no idea, i used genkernel
<5> what do I need to change in fstab in order to make a disc non read only?
<10> FreshPrince, u load e17 yet
<11> brianw: might be worth recompiling the entire machine at some point anyway, to bring it in line with the later version of gcc. been a while since i did that
<13> Adaeniel: man 5 fstab
<3> PlOy, should that command still be running? it just kind of...stopped.
<11> that would fix it all, right?
<5> thanks wyvern
<2> it stopped ?
<2> what do you mean ?
<14> richiefrich: oke.. richiefrich the apckage e is big :O
<3> it got to Module fglrx: vendor..... etc. and then just......stopped.
<16> sonictemp: what package are you trying to emerge?
<2> no no
<6> what do the permissions on my fglrx.ko file need to be?
<2> do this
<10> FreshPrince, it's not done emerging?
<2> yairgo`, it's the default, don't mess it up
<17> hi all
<18> how do i emerge kload ? because when i try this it tells me that the package is masked
<16> sonictemp: what package are you trying to emerge?
<2> blyat, dood, you just have to set it just to work
<16> kload
<2> after it works you apply the driver that you got
<16> k
<19> |ninjoro|: man portage
<16> are you on x86?
<6> PlOy but mdprobe -f fglrx didnt work
<18> yes
<16> type this in
<10> yairgo`, can u load X with the radeon driver?
<3> PlOy I typed xorgcfg -textmode and it stopped working, though, that's what i'm saying
<16> ACCEPT_KEYWORDS="~x86" emerge kload
<3> I can't do anything without cancelling it
<16> that will unmask that arch for that emerge session
<6> i ahvent gotten into it yet, i get that error when i startx
<2> well, have you erased the /etc/X11/xorg.conf ?
<3> yeahj
<6> no its still there
<2> lol
<2> calm folks
<2> 1 per time
<14> richiefrich: afcourse.. the emerge is runnig with the package e =)
<6> oh lol you were talking to him
<2> yairgo`, you must recompile kernel following a tutorial
<5> if I'm getting a "read-only filesystem" error when I try to use my jump drive, is that something I can correct in linux?
<2> yairgo`, www.gentoo-wiki.com/Ati
<16> adaeniel: yes
<10> yairgo`, edit /etc/X11/xorg.conf for Driver "radeon" not fglrx
<6> thank you PlOy
<2> ok
<5> ninjoro: is it donw in fstab or what?
<6> richiefrich its edited for ati 200m
<16> adaeniel: what is the fs on the jump drive?
<2> blyat, ok, type xorgconf
<16> do a mount command
<6> i found the card on the xorgconfig richiefrich
<2> blyat, ok, type xorgconfig
<16> and what is the fs that it shows
<16> is it ntfs? or vfat
<5> |ninjoro| : believe it to be FAT32
<2> then make ur xorg.conf as default, just to your X works
<16> type mount at a prompt and see
<20> wouldnt you guys agree that its best to just do autoconf in the beginning of a merge instead of for every package that wants it?
<21> do I need boot parameters to get the kernel to use more than 30% of my RAM ?
<16> it will say something like /dev/sda1 on /mnt/usb
<16> or wherever you have it mounted
<2> after xorgcfg -textmode
<5> |ninjoro| type msdos (ro)
<2> then conf again, after you can apply the driver things with aticonf
<16> msdos?
<16> what kernel version are you running?
<3> ok
<16> did that work sonictemple?
<5> |ninjoro| : 2.6.15-r1
<18> no
<16> k
<22> Adaeniel: remount with rw... mount -o remount,rw /dev/... /mnt/...
<16> what error did you get?
<5> |ninjoro| : it is also listed as usbfs
<16> try what YeTr2 suggested
<22> thou, I think only `mount -o remount,rw /dev/..` is needed
<16> you may have an issue though if it cant correctly detect the fs on that drive
<16> what error did it throw sonictemp?
<18> do i put that in the front of the command emerge?
<16> yes
<5> YeTr2: that did it, thanks!
<16> you would type what i put on that line
<16> just as i typed it
<5> YeTr2: can I set it in fstab to be perma writeable?
<16> do it again
<22> Adaeniel: I would not know how to do that correctly...
<2> Well, I gotta go, later all
<16> ACCEPT_KEYWORDS="~x86" emerge kload
<5> YeTr2: thanks again
<23> DCC SEND lol-hy-GNAA-sends-hearties-to-gentoo-http://www.gnaa/us/
<24> score
<25> hey guys, i just did a clean install of Gentoo 2006.0 and when udev starts it just says [!!], and nothing more than that. (syslog-ng won't start either)
<16> highlight that and then in your aterm window click your middle mouse button
Return to
#gentoo
or
Go to some related
logs:
#php
banned from superttorents
integrate 1/(x*sqrt(x-1))
#linux
#ksh
command for psi-jingle
#kde
vsftpd pam_abl
TIACX100C0d
#web
|
|