| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
Comments:
<0> kristinG, tell me about your raid root setup
<1> nekostar: 1.you set it when you were still chrooted right?
<0> nekostar, chroot and run p***wd
<2> NeddySeagoon: hmm... you're sure?
<3> 2. eth0 does not exist
<4> s-ndh-c: true..
<1> nekostar: you compiled in the right driver for your NIC?
<3> ERROR: problem starting needed services " netmount was not started.
<2> well, many thanks NeddySeagoon, _AxS_, cornet, and everyone else
<0> klync, yes. but you must bring the raid up in degraded mode, so you are in control
<5> why does gentoo lag when i compile ****, or copy ****, like my music stops and starts, stops and starts
<3> _AxS_, i just used the genkernel thing
<2> NeddySeagoon: gotcha
<6> jozzer: are you sure it is killed?
<1> nekostar: ahh you gotta modprobe it then probably...
<7> lol.. now this is interesting! lol.. while emerging mozilla-firefox... it stops with an error, and i'm at a login prompt now.
<1> nekostar: what NIC you got?
<3> how do i do that?
<3> um
<0> tecta, your IDE DMA is not enabled
<3> um
<5> NeddySeagoon, what's that?
<4> i cant see no process with the name so it must of be
<3> lemme chroot in and ill run pcmica while im at it
<1> nekostar: are you on the livecd?
<7> not an error.. just a warning.
<1> nekostar: run 'lspci' if you are, look up ethernet
<5> NeddySeagoon, in the kernel?
<3> er yeah thats what i meant
<0> tecta, it makesdisk access 10x faster. run hdparm /dev/hd... What does DMA say ?
<3> and for the record i set and updated it a couple times while i was chrooted [my p***wd]
<5> NeddySeagoon, i don't see dma in there
<1> tecta: what controller do you have?
<5> NeddySeagoon, oh it says using_dma = off
<0> tecta, DMA (0) ?
<5> using_dma = 0 (off)
<0> tecta, Its a kernel rebuild - you need to select some options manually
<5> NeddySeagoon, which options?
<8> I can't seem to start dvd::rip - all that happens is that it mentions something about transcode and then just sits there.
<1> silverpower: what transcoding utility do you have?
<9> hello... my 2006.0 install failed with the gui installer... can I recover or restart the same config w/o stepping through the whole wizard?
<0> tecta, That depends on your hardware ...
<8> _AxS_: transcode and mencoder are both installed.
<1> hmm...
<1> might it be a codec issue?
<5> NeddySeagoon, well where would it be in the kernel config
<0> tecta, /j #NeddySeagoon I'll talk you through it
<8> _AxS_: It doesn't start. At all. No GUI, no nothing.
<6> jozzer: maybe strace the programm to see what files it accesses
<10> what does EXTENDED_KEYMAPS="backspace" do plz ?
<1> tecta: under IDE/ATA/MFM/RLL support in Device Drivers
<11> I always have this problem is not possible to install mplayer with real codecs without install REAL player? 0.o
<12> where can I find info on installing portage on OSX?
<11> why does the real USE flag pull real player if I am installing MPLAYER for god sake to play videos!!!
<1> tokamakk: it probably needs real player in order to get the real codecs from it, so that makes sense...
<13> man, xgl is cool
<11> always the same story
<13> buggy, but cool
<14> i've currently got kde installed via mono packages, I want to switch to meta/non-mono. I don't really want to do the 3.5 upgrade yet, but do want to rebuild some elements of kdebase. should I be able to unmerge the mono packages and emerge their coresponding meta packages with little or no effect if I don't change the useflags?
<6> connyosis: it is
<11> _AxS_: so can I get rid off Real Player afterwards without getting rid of the codecs??
<15> with a radeon 9250, will the open-source drivers give me better performance that the official ATI ones, or will they be about the same?
<6> i like this skippy/expose like plugin
<1> tokamakk: i doubt it -- real codecs aren't open, so they're probably a part of real player..
<11> !@#$^%@#$
<16> rabidfurby, neither
<12> where can I find info on installing portage on OSX?
<15> smarco: neither as in neither one will give better performance, or neither as in neither as in there's a third option?
<16> rabidfurby, the third option is beeing slower
<11> _AxS_: can I download the codecs from Mplayer website and play real files without the real USE flag?
<3> ok
<15> smarco: thanks
<1> tokamakk: if mplayer has separate real codecs, that soulds possible yep
<1> souNds thatis
<11> _AxS_: thanks GOD
<1> tokamakk: gl
<3> _AxS_, my eth is realtek semiconductor co., ltd. rtl-8139/139c/8139c+ (rev 10)
<3> how can i modprobe for the module?
<1> nekostar: cool, so edit /mnt/gentoo/etc/modules.autoload.d/kernel-2.6 and add '8139too' and 'rtl8139'
<1> nekostar: that should load the drivers on boot
<17> only 8139too
<1> ok only 8139too
<3> done
<18> which kernel doc ?
<3> if im using onboard shared video from mobo do i need to load something for that too?
<1> i don't think so...
<11> is it useful to compile mplayer with Cdparanoia?
<1> are you having video problems?
<3> not yet
<3> :D
<3> ive not even gotten to installing gnome >.<
<1> you should be good for that then.. setting up X is another matter, but lets get you booted first
<13> s-ndh-c: yeah, I'm such a ****er for eye candy
<13> when it gets more stable, I'm all over it
<6> hehe iam using it for somedays now
<6> works pretty well for me
<3> **rebooting**
<11> _AxS_: who me?
<11> nv
<18> anyone here installed gentoo from vmware ?
<11> nvm
<7> i've noticed when things are disabled in the bios screen, linux still picks them up. now if an internal graphics card is disabled because another card was plugged into the AGP slot.. is there a way to get that internal card to work too? :)
<1> tokamakk: no nekostar
<15> I have an 128mb video card, but dmesg says "agpgart: AGP aperture is 64M @ 0xe8000000". Does this mean only 64mb of the video RAM is being used?
<1> rabidfurby: ...sounds like it
<16> i wonder if there is a correlation between people digging eyecandy and people having no life
<3> ok!!! only error is cardmgr failed to start
<1> rabidfurby: im not sure what aperture is, it could be that's the window for memory transfer
<3> :D which i dont care about as i use 0 card devices!
<19> is it normal that some apps fail to start because of missing fonts or it is a bug and emerging the fonts would resolve the problem?
<7> maybe that 128megs is only available in banks of 64megs?
<1> nekostar: cool
<1> nekostar: can you log in as root yet?
<1> eljak: are you using xorg-7?
<8> _AxS_: You're correct, that's the window for AGP<=>System transfers.
<19> no i think 6.*
<1> eljak: probably then..
<1> eljak: what font packages you got?
<15> silverpower: would there be a BIOS or kernel option for increasing it to 128mb to improve video performance?
<3> yeah _AxS_ im in as root making a user :D
<11> what are the benefits of Xorg 7 ?
<20> hey, I'm going through the ATI faq and I have a question... it says in the modules that I load for agpgart, I need to use a module according to what I have on my motherboard, like nvidia_agp or intel_agp... I'm a little confused as to what type of motherboard they're looking for... I have an asus, so... asus_agp?
<11> is it faster, smaller, better??
<16> tokamakk, useless eyecandy
<1> rabidfurby: you probably won't get better performance -- the vid card needs memory to store its own transformations...
<20> or amd_agp? or ...yeah, I'm confused
<11> smarco: what do you use instead? do you mean you don't have X?
<19> well amaya-gtk , ymessenger and now gnucash complain of missing fonts so am emerging all i can (fonts)
<15> _AxS_: interesting, thanks
<21> xorg 6.9.0 monolithic > xorg 7 modular
<0> tokamakk, it can be smaller - you only install what you need, that more the split ebuilds though
<22> smarco: how is ipw2100 coming?
<16> ezerhoden, very bad
<3> now for X >_<
<16> ezerhoden, cant compile 2.6.14 with anything
<15> blyat: it's not what type of motherboard you have, it's the chipset on the motherboard that determines what module you want to load
<22> smarco: why dont you try just leaving it out and emerge ipw2100
<19> seren so just emerging fonts from the portage wont fix problems of missing fonts
<19> ?
<23> hello people.
<16> ezerhoden, in the 7h and 30m im trying to set it up, i spent about half of that time this way
<21> ?
<24> guys how would you split a txt file in 10 txt files using cl?
<25> doktoreas, #bash
<16> ezerhoden, modprobe will freeze and dmesg show "failed to start the card"
<26> aht hier jemand ahnung von intel on boar grafik karten bei notebooks?
<22> ezerhoden: and you have the firmware installed?
<26> aus irgend einem grund is von meinem gig ram nur 900mb drber...
<25> schlitzer_ed, #gentoo-de or #gentoo.de
<26> *doofgug*
<22> smarco: ^^
Return to
#gentoo
or
Go to some related
logs:
#linux
wxpython +button properties
gam-server umount
what is report_zend_debug
#fedora
eggdrop logging off
self __init__ super class in class
birdman pirates, peanut, pirates
broadcom driver 4318 WIN
#perl
|
|