| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59
Comments:
<0> tomg hang on a sec
<1> reisio, the source is suposed to work, my network topology is oki it seeems to work under windows box on the other room fails on my gentoo box
<1> so gentoo seems to be the problem
<2> WhiteNoise: Ok, i'll try that tomorow because I've spent far too much time on this today and getting really pissed off :(
<3> Frederick: awe, just barely Gentoo-related, then :p punk
<1> some wierd kernel policie maybe
<2> TuxProbe: Ok.
<4> tomg, I've been there more than once with XFree86, so I hear ya...
<1> reisio, specially the java sample output is very wierd
<2> And it dosen't help that I have no clue what I'm doing most of the time :)
<5> Well I guess I will try emerge-webrsync...... normal sync is not working with any server
<6> the new Xorg 7.1 is incomaptible with the binary drivers from nvidia and (probably) ati
<6> you have to download to xorg 7.0 or wait for ati to release updated drivers
<7> both, yes
<6> downgrade*
<0> tomg 'SB Audigy LS / Live 24bit' under 'sound/alsa/pci-devices' is the one i had alsa working with
<7> doesn't work, won't work until the 9xxx nvidia drivers, or the next major ati release
<0> OMG dont eva kill the X! :o
<2> TuxProbe: But which card did you choose? Because I'm in that section of the kernel right now.
<3> I think this ancient nvidia TNT riva card is better than my less-ancient onboard intel i810
<3> so maybe I'll put that in my main
<0> tomg 'SB Audigy LS / Live 24bit' ?
<2> TuxProbe: Yes
<6> tomg emu10k2
<2> uid_0: I don't see that one...
<0> there is a new emu10k?
<6> emu10k1 supports it
<2> uid_0: That's the one that's not working...
<6> interesting
<8> tomg, how did you install gentoo originally?
<2> It gives me a buinch of errors on startup too
<2> AndrewKT: Through Knoppix.
<0> tomg choose help on the module just below emu10k modules, if it says 'Symbol: ca0106' i say go for it :)
<8> tomg: just download/burn a minimal install cd
<3> mzbot: gentoo altinstall
<9> reisio: http://www.gentoo.org/doc/en/altinstall.xml
<3> tomg: http://www.gentoo.org/doc/en/altinstall.xml#doc_chap3
<8> tomg: when you boot off it, watch the screen for the right driver name for your soundcard
<10> nothing wrong with installing via knoppix
<2> But why?
<2> Oh, I thought you wanted me to re-install lol
<5> Can you do a emerge --sync when in chroot?
<8> no, just let it autodetect it...
<11> is there a channel for dvd::rip
<0> chroot > *
<6> ssstormy: perl?
<2> AndrewKT: Then I'll be able to see the driver name?
<8> BobOki: after you've unzipped both .bz2 files(during install), yes
<11> uid_0, you mean the channel is called that?
<6> ssstormy: you don't need dvd::rip anyway if you just want to copy dvds
<2> reisio: Why did you give me that alt install link?
<6> ssstormy: dvd::rip sounds like a perl module
<11> uid_0, I know how to make direct copys but I want to encode along the way, and acidrip hasn't been working for me
<11> uid_0, yeah it is perl
<6> encode?
<3> tomg: hints at a thing or two you should consider if you're installing with Knoppix
<12> it's a perl frontend to transcode
<8> tomg: hit F2 when it tells ya to, for "verbose" mode, and yes. and you can look at the output of lsmod
<5> During install in chroot, I am currently at the section where I am emerging my bootloader (grub), but it says its masked, so I am trying to do a sync, but I am getting errors
<6> ssstormy: I've had luck with lxdvdrip in the past
<12> but it has a full gtk gui, not just a perl module
<6> ah
<11> uid_0, I like acidrip and dvdrip but my drive is giving me hell so I want to rip from an ISO I made
<5> rsync: link_stat "/metadata/timestamp.chk" (in gentoo) failed: No such file or directory (2)
<11> uid_0, dvd::rip has an option for using an image but it then fails when I try to use it
<13> hey all, im trying 2 patch my gentoo kernel 2.6.14-r2 w/ suspend2... i downloaded the .patch files but how do i apply all of them???
<2> AndrewKT: Ok, I'll try that tomorow, thanks.
<8> BobOki: try specifying a different mirror name, sounds like you might have chosen/auto-detected a bad one
<2> TuxProbe: 'SB Audigy LS / Live 24bit' is the one with the ca0106 modules...
<12> ssstormy: i managed to get dvdrip to rip from an image after modifying something in one of its perl modules...
<5> I have tried three.... so far all do not work..... (tries more)
<8> hrm...
<0> tomg indeed, is what ive been telling ya ;)
<14> Why does equery lie? equery b /usr/bin/xview returns 0 packages, but I know it is installed by a package. I just don't remember which.
<2> TuxProbe; I really hope that after that alsaconf will start to work.
<5> just tried another one (rsync://gentoo.mirrors.tds.net/gentoo) and it too gave same error
<11> stuuf, do you remember more specifically what u did?
<8> BobOki: can you ping out to the net?
<5> 64 bytes from p12.www.re2.yahoo.com (68.142.226.43): icmp_seq=1 ttl=52 time=34.2 ms
<13> hey all, im trying 2 patch my gentoo kernel 2.6.14-r2 w/ suspend2... i downloaded the .patch files but how do i apply all of them???
<12> ssstormy: i think it was in Job.pm, something like changing $device to $projectfile
<15> how can i make sdl alsways use alsa as its audio driver?
<16> I'm running into a serious problem, with firefox and epiphany I'm getting consistent program freezes. It seems ***ociated with running javascript as firefox doesn't go down if it's disabled but if either firefox or epiphany are running js-heavy pages (like gmail) they'll lock up -- they don't top the cpu but have a consistent 5%-or-so utilization. Any suggestions for strace/gdb commands to run. Restarting X doesn't help but
<16> sometimes I can surf for hours after a reboot. Any help would be most appriciated.
<2> TuxProbe: I always have to copy the kernel config back into /boot/kernelversion, right?
<5> I have tried liblo, gatech, tds and colorado... all same error
<11> is there like a mkdev or something to make a file a device? you know as if it was dd'd to some extra device...
<12> ssstormy: mount -o loop
<17> tclineks: try another jre
<8> BobOki: try: ls -al /usr/portage/metadata/timestamp.chk
<5> -rw-r--r-- 1 portage portage 32 May 30 20:53 /usr/portage/metadata/timestamp.chk
<11> stuuf, I know how to mount an iso, I just want the sustem to treat it as an acutal device
<14> ssstormy: mknod
<0> tomg: do the following : flag both emu10k1 and SB Audigy LS as M - save your kernel .config - sudo in /usr/src/linux and type make clean modules modules_install
<16> brianw: you think it's java-related?
<12> oh yeah, losetup
<14> ssstormy: Eh, sorry. mknod is not for your problem.
<2> TuxProbe: Ok, I just copied the kernel back into /boot, so I'll do 'make clean modules modules_install'
<11> johey, that's ok, thanks for the contribution
<16> brianw: disabling java in ff with chris pederick's toolbar -- still locks up
<0> tomg: after that, edit your /etc/autoload.modules/kernel2.x and type in snd_ca0106, then reboot and test it
<15> how can i make sdl always use alsa for its driver?
<0> tomg modules_install only builds your /lib/modules, so no need for kernel image
<2> TuxProbe: What does that make clean modules do>
<18> hey folks I jsut DL'd Gentoo and tried it live cd ,, rally nice ,,, before I isntall it on my dell inspirion 2500 Celeron 800 Ghz, 128 ram, 5 gig HD laptop ,,, will it recognize my wificard? it is a microsoft mn520 and has a primous-2 chipset
<0> make clean... cleans.. make modules builds your 'M' flags.. modules_install puts them where they belong
<18> and will it work ok with this laptop given the specs?
<3> Detox: what's the inspiron model no?
<18> 2500
<2> TuxProbe: Alright cool.
<12> 800ghz? that should emerge system in no time...
<7> Detox: that'll take about a day to emerge system >.>
<8> BobOki: have you tried emerge-webrsync ?
<0> tomg b4 u do it, its a good idea to rename the modules directive
<5> it just sits there.... forever
<18> dont understand emerge??
<3> Detox: but the card didn't come with it? :p
<2> TuxProbe: Before I do what exactly?
<8> BobOki: can you rsync from another machine?
<0> tomg prior to the make
<18> havent tried yet will when i get to work 2morrow
<3> Detox: don't worry about it, you don't even have to 'emerge system'
<8> BobOki: inside your network to outside?
<5> This is my only gentoo box I have here... so no ;(
<18> what does taht mean?
<2> TuxProbe: Well, it's too late for that/...
<0> tomg its only one module, i think its ok :)
<3> Detox: just do a search for '"microsoft mn520" linux' and you'll quickly get an idea of whether or not it's supported
<8> BobOki: when did you download the portage-latest file?
<18> and no the card I bought it is wifi
<2> TuxProbe: I better hope so.
<5> About 45 minutes ago
<13> hey all, im trying 2 patch my gentoo kernel 2.6.14-r2 w/ suspend2... i downloaded the .patch files but how do i apply all of them???
<18> I know debian sees it
<8> BobOki: it should be new enough for you... what was the other problem?
<5> Changed serves to a different rsync server and tried another websync
<19> kantlivelong: with the patch program
<5> oh.... well grub is masked
<0> tomg after the reboot, follow your guide in how to config the alsa files, emu10k1 needs to be renamed to ca0106
<18> but have not used any slackware versions before and that is waht gentoo is right?
<13> Triffid_Hunter: well its like 1000 patch files..
<13> Triffid_Hunter: ive never needed to manually patch a kernel
<8> BobOki: you typed emerge grub and it told you it was masked?
<5> yes
<5> on x86
<2> TuxProbe: But I'll do the rest tomorow after work because this **** is really pissing me off.
<5> !!! All ebuilds that could satisfy "grub" have been masked.
<19> kantlivelong: cd /usr/src/linux; cat ~/patches/*patch | patch -p1 --dry-run
<19> kantlivelong: if they succeed, take out --dry-run
Return to
#gentoo
or
Go to some related
logs:
#math
yoruichi jpeg
FormAssembler
#perl
* #python :You need to be identified to join that channel
ununtu vnc
daeken php
ubuntu firestarter exit status
perl binmode 1256
#linux
|
|