| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62
Comments:
<0> jburd, is your ethernet module loaded?
<1> unset/scrambled
<2> roger55, ah, thanks
<3> JRGC: Sorry, what did you want instead? Try CFLAGS="-march=humanbrain"
<4> that's what I have *realtek rtl8139/810x family fast ethernet nic*
<5> hello
<1> msoul, try booting with acpi=off on the commandline, then check with ifconfig -a
<5> checking for OpenEXR/half.h... no
<5> configure: error: *** openexr dev header half.h not found *** some know what do to please help :(
<4> roger55: I'll try that, anymore options should I be aware off cause it's kind of frustrating everytime I fail I switch to windows :-)
<6> i rebuilt my kernel, and after a reboot, my modules won't load...invalid module format...but the kernel was built from the same sources...any ideas?
<7> Solv, did you do make modules_install ?
<8> emerge world has installed me kde libs 3.4.3 and kde libs 3.5.2
<8> why that
<9> Solv, emerge module-init-tools to rebuild the module loading tools
<6> whyz, yes...and they did come up with warnings.....can't find symbols
<9> Solv, Unresolved symbol errors means the modules did not compile properly because they need other options in the kernel to provide the symbols
<10> * Failed Patch: NVIDIA_glx-1.0.6629-defines.patch !
<10> it fails everytime
<11> hello
<10> but dunno why. all md5 sums are ok
<10> hi
<6> NeddySeagoon, so what do I need to do to make it work?
<10> it is an official nvidia-glx-1.0.8756 ebuild
<11> what do you think about setting up a pvr with gentoo?
<6> NeddySeagoon, dmesg indeed says it is expecting a SMP kernel, but I removed the SMP...because it was cauing build errors (I think)
<5> checking for OpenEXR/half.h... no
<5> configure: error: *** openexr dev header half.h not found *** < some1 knows howto fiix that?!
<1> msoul, try it then tell me what ifconfig -a said.
<4> roger55: I will and write everything down, thanks
<12> thinkinginbinary: I think you missunderstood me, I just changed it to what you told me, so that's what I have now!! Thanks a lot!!! i mean it!!
<3> JRGC: Oh, okay. ;-)
<9> Solv, You must rebuild the kerenl and all its modules when you make changes like that. Do the kernel build again starting with make clean in the kernel tree to remove all the old binary files
<1> msoul, it might just work. :)
<13> anybody here used the RR4 XGL Live DVD of gentoo?
<3> JRGC: I thought you meant that's what you already had.
<4> roger55: I really hope, much thanks
<14> anyone got an idea, why I get '/dev/sdd1/' is in use - while I try to mount it - even if it's not mounted?
<1> navyn, thats not _of_ gentoo.
<12> thinkinginbinary: When I read again what I wrote, I noticed it could sound like sarcastic, but I was not being sarcastic, I really meant it.
<15> can someone help me with samba pls? when i try to access shares on an NT box, i get NT_STATUS_LOGON_FAILURE. i've trawled samba's site and google for solutions, which i have tried, but the NT server still fails to authenticate the p***word...any ideas pls?
<5> NeddySeagoon would you lend me a hand ?
<16> does anyone know a link which explains how to write an ebuild for a program that's not in the portage tree and how to make it work?
<6> NeddySeagoon, yeah okay...doing it now...i thought i had done it...but i probably forgot to make clean
<3> JRGC: Oh, I didn't think you were being sarcastic. I just thought you meant that's what you already had set. No worries.
<12> thinkinginbinary: Cheers!!! :)
<5> hawking i wouldnt recommend it
<9> exo|irc, What with ?
<4> bbiab
<5> checking for OpenEXR/half.h... no
<5> configure: error: *** openexr dev header half.h not found ***
<16> exo|irc: why?!
<13> roger55, how so?
<9> exo|irc, Is this a new package or an update ?
<5> new
<1> navyn, some guy called lxnay made it, not gentoo.
<5> its done manually because it isnt in the portage
<9> exo|irc, What emerge command are your running ?
<5> i just did ./configure
<17> how do you convert bootsplash themes into splash themes ?
<9> exo|irc, It looks like the package is broken, or depends on somethinge else not installed. Where is the tarball ?
<18> what's the best way of finding out the VideoRam of my graphics card for xorg.conf?
<18> it asks for quite a precise number and i want to get it right - i know it's 128MB
<19> well, it's 128mb then :P
<5> NeddySeagoon never mind got it fixed
<1> fastly, multipy by 1024 then
<1> fastly, then you have the kb value
<18> thanks
<20> Astinus: Naamah hates cheaters :(
<21> spb: noticed. :/
<21> spb: Remind me to take away its cake privileges
<20> sure ... when do you want reminding?
<21> spb: next time DevRel throws a party for ciaranm?
<17> fastly: is xorg autodetecting your ram amount incorrectly ?
<20> oki
<20> i'll try to remember
<22> NeddySeagoon, http://www.rafb.net/paste/results/7WSggu63.html Still didn't work.
<23> the is no need to install coldplug with the new udev??
<23> *there is
<9> jburd, That looks OK. Do ifconfig eth0 and paste the HWAddr here
<22> Ok. I'll brb.
<23> i've installed gentoo without coldplug and i ve to put all modules to start manually...is this normal?
<4> roger55: sorry to tell that it didn't
<1> ruben_gonc, yes.
<1> msoul, so what did ifconfig -a report?
<4> and I did what you asked me for the ifconfig -a
<4> yeah
<1> msoul, what interfaces did it show?
<23> roger55, and what i have to do to my usb mouse work?
<4> eth0 eth1 lo and sit0
<1> msoul, do you have 2 network cards?
<1> ruben_gonc, make sure you have HID support in kernel/loaded
<4> roger55: I have intel(r)pro/wireles 2200bg network connection and realtek rtl8139/810x family fast ethernet nic
<4> toshiba laptop
<23> roger55, modprobe hid?
<24> Hi... How to check dependencies between packages? emerge -pvuD world wants to emerge a package and I want to see which package I've installed is dependent to it...
<25> whc torrent client supports proxy tunneling in linux?
<1> ruben_gonc, I dont use modules, maybe.
<0> how can i check how /etc/init.d/modules is loading the modules? i have so many modules loaded, i know i don't need it all... (scsi_*, sata_*)
<4> roger55: what else can I do?
<1> msoul, ok and what are you trying to get working?
<4> to get anything to work
<4> I don't use wireless myself
<4> need to get the network up
<1> msoul, what happens if you boot with gentoo acpi=off and do: dhcpcd eth0 or dhcpcd eth1 ?
<1> msoul, does it time out?
<4> roger I did dhcpcd eth0 and nothing
<14> is it a bad idea to have '/' on a lvm?
<4> roger55: I even tried to change the keymap to 15 *fi* it gives me file not found or directory
<1> msoul, nothing as it hangs, or what?
<26> isn't it possible to tell kmail to use different sending-accounts for different identities?
<1> guen, it is.
<26> roger55 how? :)
<4> roger55: nothing I typed enter just another commandline
<1> guen, that's called transport in kmail
<4> blank
<1> msoul, ?
<6> NeddySeagoon, I figured out my problem with the modules not loading...it was only the sound modules, and it was because alsa-driver needed to be re-emerged for the new kernel!
<4> roger55: I really don't know how to explain it myself
<27> what would cause a TFTP server not to work correctly it shows in netstat but it doesn't show file connections being made
<1> msoul, that means it set up the interface
<26> oh right
<26> thx roger55
<9> Solv, ok - you will remember that for next time
<28> guys anyone uses wengophone?
<1> msoul, and the network should work. check with plain ifconfig
<4> roger55: okie, and if not? :-)
<6> NeddySeagoon, yeah...i prefer to have them built in to the kernel...alsa that is...but apparently there have been bugs with that in gentoo
<1> msoul, by blank, do you mean you get another prompt?
<29> what does it mean if you get a message in portage, telling you so and so file is not a valid atom?
<12> Does it make a difference to switch from profile 2005.1 to 2006.0?
<4> roger55: yeah
<1> nastynodes, that you probably have a wrong entrz in /etc/portage/ files
<4> and I just type again dhcpcd eth0
<1> msoul, no need.
<30> i have a USB sound device and an onboard sound card, and which is soundcard 0 and which is soundcard 1 seems to be a bit unpredictable. can i use udev rules to fix it?
<27> would hardened-sources prevent a tftp server from working ?
<4> typed even
<12> To switch the profiles, I just need to change the link?
<1> msoul, if dhcpcd eth0 worked it won't tell you anything.
<29> roger55, it says 'app-misc/screennet-misc/dhcpcd'
<4> roger55: okie I'll try to gentoo acpi=off then dhcpcd eth0 if not dhcpcd eth1
<9> Solv, I use kernel ALSA mades as modules. alsa-driver is only worth trying if you have a bleeding edge sound chip
<1> msoul, just give you another prompt
<6> NeddySeagoon, yeah which i don't
<1> msoul, yes, and then try to ping something
<4> roger55: I did ping www.gentoo.org and nothing
<4> forgot what was the line
<1> nastynodes, heard that before
Return to
#gentoo
or
Go to some related
logs:
invert colors+xorg
checking whether IMAP works
#bash
ssh -X Error: Can't open display debian server ubuntu client
#web
defrag in ubuntu
gentoo apache2 /usr/htdocs
deb-src l2tp
ubuntu airlink mimo xr driver
#mysql
|
|