| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62
Comments:
<0> Cyberdevil0: And what is CHOST set to in make.conf?
<1> woops, i mean $ lame --decode mp3file
<2> sirpreis: lshw, lspci, lsusb, cat /proc/bus/usb/devices
<3> dystopianray, i haven't found any mp3 player that's better yet...cept i haven't tried amarok
<4> Solv, dystopianray: as an xmms alternative, cplay is cool and textual
<5> amarok is cool
<0> allievo: ls -l /dev/dsp /dev/sound/dsp
<6> nanobanshee, nope not there
<7> allievo: you *do* use alsa? then test basic sound with : aplay /usr/share/sounds/*.wav
<8> thanx, for the lame advise :)
<9> RiverRat nope, gcc-config doesn't help, CHOST is i686 and stage 1
<10> hehe
<5> riverrat: how to check version of portage?
<2> Luckys: ah, link rot. the full handbook is on the cd. you should be okay.
<11> guys how do i protect a dir from portage like /etc is?
<1> koad: # emerge --info ?
<8> what other program will decode and save to a different format?
<0> Cyberdevil0: From another channel: <14> RiverRat: prolly fix_libtool_files.sh's --oldarch is your friend
<12> cahoot: Yeah, that works
<11> whats the thing i add to make.conf
<13> nanobanshee: 02:0d.0 System peripheral: Toshiba America Info Systems SD TypA Controller (rev 05)
<6> ok, thanks nanobanshee , FoW
<13> thats what lspci tells me
<13> thats probably it
<7> allievo: how do you invoke mplayer?
<1> CoCo_Kid594: pipe the lame output into wahtever encoder you want
<10> Luckys, np for whatever I did :)
<12> RiverRat: That returns "sound/dsp" and "/dev/sound/dsp"
<14> Cyberdevil0: wait a moment before running that
<14> Cyberdevil0: have you used any binary packages?
<12> cahoot: Invoke?
<7> allievo: use
<8> what's a good encoder?
<10> cahoot, $ mplayer <file>
<12> cahoot: How do I use what?
<9> marienz nope
<10> cahoot, err...
<14> Cyberdevil0: can you pastebin a more complete build failure?
<1> CoCo_Kid594: what format do you want to convert to?
<7> FoW: thank you
<0> Cyberdevil0: <???> RiverRat: shouldn't happen on a sane system though, often caused by (incorrect) binpkg usage (i386 binpkgs installed on an i686 system)
<14> Cyberdevil0: there may be more wrong here. fix_libtool_files.sh may "fix" this particular symptom but it'd be good to determine what's actually causing this.
<3> CoCo_Kid594, lame is better than bladeenc for going from wav to mp3...if that's what you wanna do
<2> richiefrich: CONFIG_PROTECT
<9> marienz http://pastebin.com/647529
<1> Solv: he said he wants to go from mp3 to wav
<11> nanobanshee, where do i find that in man portage?
<12> cahoot: Excuse me, but I cannot understand what you mean. How do I "use" what?
<3> dystopianray, well that's not decoding
<3> dystopianray, well that's not encoding
<3> rather
<14> Cyberdevil0: from what stage did you start?
<3> it's decoding
<15> any ideals why my machine is erroring when it should be booting grub, im getting this 'partition signature !=55AA'
<8> simple wav.. they are short sound bytes for my game server... the the game won't play the sounds unless they are in just wav format.. the sound bytes I have are in mpeg layer 3 wav
<9> marienz stage 1
<9> installed yesterday
<1> Solv: no, now he's talking about encoding the wav into other formats
<14> Cyberdevil0: where are you now? It looks like your python was compiled with an i386 CHOST while the rest of the system is i686.
<11> nanobanshee, i found thanks
<3> dystopianray, okay, i see....
<8> not MUSIC or MP3's
<14> Cyberdevil0: python *should* have been recompiled i686 during install.
<2> richiefrich: http://www.gentoo.org/proj/en/hardened/selinux/selinux-ppc-handbook.xml?part=3&chap=4
<1> CoCo_Kid594: # emerge lame $ lame --decode *.wav
<0> Cyberdevil0: Have you run bootstrap.sh yet?
<9> yes
<16> hi all
<9> and emerge system and all, but now im installing gnome-light
<0> and emerge -e system && emerge -e world ?
<16> richiefrich, today is my bad day lol
<11> LinuxMafia, why
<14> Cyberdevil0: strongly recommend you use -e system, not just system.
<8> thanks
<9> ow :O
<16> richiefrich, nothing works for me
<14> Cyberdevil0: remerging python should fix this particular problem.
<11> LinuxMafia, :(
<16> richiefrich, that is ok
<11> LinuxMafia, there's always tommorrow
<9> marienz strange that i have to re-emerge all the time after installing a stage 1 :(
<0> Cyberdevil0: I did a stage 1 on 2006.0 (pre-??) and it has worked just fine.
<14> Cyberdevil0: starting from a stage3 and doing an -e world is often more "thorough" than starting from stage1.
<17> how can I find out what packages are trying to pull in old kde 3.4.3 stuff as dependencies (emerge -uDpvN world) ?
<1> why are the latest nvidia drivers marked stable for amd64, despite only just being released?
<2> dystopianray: probably because they are binaries and nvidia says they are stable?
<9> RiverRat its the second time im doing stage 1 on 2006 and still doesnt work :p home the python works
<0> Cyberdevil0: Well something must not be getting set right or at the right time. :/
<14> RiverRat: was your stage1 amd64 or x86?
<1> jintxo: use the -t flag
<0> dystopianray: Becasue the others are a disaster.
<9> marienz x86
<14> Cyberdevil0: I know yours is, you can't hit this exact problem on amd64 :)
<0> Ouch, the kline bandit strikes again.
<9> got 2 errors during the installation, can fix one with forum but the other one is hard :p
<17> dystopianray, ah nice one. thanks
<0> Cyberdevil0: Oh, I'm on amd64. Forgot to mention that.
<9> hehe
<8> nopw it says unsupported wave format when I replayed it.. it was just static..
<0> marienz: x86-64
<8> ummm..
<14> RiverRat: on a bunch of nonx86 archs there's really only one CHOST, so you can't hit this exact problem :) check if python got merged during install
<8> what could you use to play the file and resave it as wav?
<1> CoCo_Kid594: $ aplay *.wav does nothing after decoding the mp3s ?
<1> CoCo_Kid594: just use lame
<11> where do u upload pics for a wiki page?
<17> i didn't even remember rss-glx was on here, heh
<8> it's not a MP3.. just tried lame.. when it decoded it.. it said unsupported format..
<8> it saved it anyway i replayed it.. and was just static..
<1> CoCo_Kid594: what format is it?
<8> Linux Properties says MPEG Layer 3 wav..
<18> CoCo_Kid594: tried 'file' command on this file?
<8> my other other working sounds just say wav in the properties.. they work..
<8> what could I use for a recording tool.. and just play them into a mic and resave them..
<7> CoCo_Kid594: I'd try ecasound
<1> CoCo_Kid594: what format is the file?
<10> CoCo_Kid594, if you can play the MP3s, Audacity can take the output from ALSA or whatever you use
<8> alsa, my gentoo box has a awe64 gold soundcard
<7> CoCo_Kid594: ecasound can handle almost any soundformat you throw at it
<19> is there a portage snapshot included in the stage3 tarball?
<1> Zider: no
<19> crap..
<9> marienz and RiverRat, gess its working now, thx for the help
<1> Zider: download a snapshot
<8> Cool i'll try that.. Thank's for the great help.. don't need help with Gentoo mine all works :) lol
<19> dystopianray: I'm putting together a customized livecd, and it's 10MB too large if I include both stage3 tarball and portage-snapshot, which I want both included..
<20> is anyone using bastille here? I want to know if it works w/o probs under gentoo .. as I had some probs running that under debian
<0> Cyberdevil0: np, marienz++
<1> Zider: maybe try to overburn the cd if you really can't strip anymore off
<19> dystopianray: can't overburn an 8cm cd by very much, if any at all
<1> Zider: ah, haha
<1> Zider: I guess you need to customize a bit more then
<9> btw whats the difference with emerge world and emerge -e world ?
<19> dystopianray: I've already stripped the contents of the squashfs-image as much as possible I think.. don't even know if it'll work anymore :P
<1> Cyberevil0: -e will force it to emerge /everything/ again
<9> ow
<0> Cyberdevil0: emerge -e world empties the tree and refills it. emerges everything in world.
<1> Zider: make a custom stage3 with less stuff in it
<9> k, then ill skip that one :p
<19> dystopianray: I'm not that much of a system hacker.. :P
<21> dudes, whats up with USB messages that fill up my dmesg | /var/log/messages file? "Apr 8 02:27:08 fry usb-storage: usb_stor_bulk_transfer_sglist: xfer 65536 bytes, 16 entries"
<1> felixo: install a system logger
<1> felixo: oh wait sorry ignore that :s
<21> its filling up gigs! haha
<22> felixo: I think that's because debugging is turned on or something.
<19> dystopianray: do you know who's working on the livecd stuff btw?
<21> ive never had to cat out my message file
<21> it totally filled it up
Return to
#gentoo
or
Go to some related
logs:
cx_oracle segmentation fault
config.layout +suse +apache2
#linux
flooding proplem
#lisp
#linux
#gentoo
#web
preg_match polygon
muzkrat bellingham
|
|