| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Comments:
<0> CRITICAL BUG: running "glxinfo" as normal user freezes the system hard; must press RESET button to resume.
<1> ok i finally succeeded in installing gentoo...i reboot and beside some warnings in the boot(i forgot to activate dma in the kernel it seems) it actually boots...and then i discover that i don't have dhcpd
<2> mmm watching apache2 compile is fun :P
<1> i wonder where i went wrong :)
<3> irc, this isn't bugs.gentoo.org
<4> i have INTERACES="eth0" in the /etc/config.d/ifplugd....
<4> do i need to do anything else?
<5> elpargo, well it's not a /problem/ .. kdeprint, eh? emerge -pv kdeprint kdebase .. if you want to switch to monolithic 3.5, unmerge kdeprint, and try to update world. any packages that block kdebase or any other such, unmerge them ;)
<2> Blehah: boot up on the livecd, chroot, then emerge dhcpd
<6> ?
<1> Doomhammer: i'm on the livecd :)
<0> MAJOR BUG: GAIM crashes very quickly after a few seconds of a Yahoo IM dialogue.
<2> Blehah: aha
<1> and that's what i'm doing :p
<7> AlfadorJanus, there is no config.d :) can't remenber let me take a look at mine
<3> irc, can you stop that?
<2> Blehah: ahA! lol
<7> AlaricX, the problem is that I don't have kdeprint
<4> elpargo: whatever it is...i just tab complete it. lol
<5> elpargo, O_O ... uh, equery depends kde-base/kdeprint
<7> AlaricX, nothing
<0> =(
<8> will emerge -C xorg-x11 remove everything that was installed during X install?
<5> elpargo, If that garners nothing, emerge -pvuDt world, check the tree to see under which ebuild kdeprint is listed as a dep.
<9> shrndegruv: no
<8> so if I do that then emerge --depclean will it?
<3> irc, if you want to search/file bugreports go to bugs.gentoo.org do a search with 'ALL searchterm'
<3> wth
<10> how do i change the actual keymap? i would like to use the us-international one.
<1> loadkeys qwerty
<5> I hope nVidia updates their /legacy/ drivers to support the new Xorg ABI .. i'll be quite angry if they don't. ;)
<7> AlfadorJanus, in fact you can leave it empty and it will check all ur interfaces, (that's my config) it will check for wireless too :)
<2> would an Athlon64 3200+ system, with help from an AthlonXP 2500+ and a Sempron 3000+ via distcc compile gentoo pretty quickly ?
<3> wsjunior, once or always?
<11> does anyone in here know of the windows app teamspeak, and if their is a port of it for linux?
<10> roger55: always
<9> Doomhammer: i'd expect so
<12> arranon, there is
<2> arranon: um yeah there is on their website
<3> arranon, media-sound/teamspeak2-client-bin
<10> roger55: ive selected the wrong one at boot of the live cd
<5> Doomhammer, an athlon -64- with an athlon -XP-.. isn't XP 32-bit? bad for crosscompiling to 64? eep? ;)
<11> sweet guys!
<3> wsjunior, for the livecd use loadkeys, for your install set it in /etc/conf.d/keymaps
<13> Alright, I got my ethernet connection to work by using another card, but my intern IP just went from .8 to .9 .. Apparently router thinks it's a new computer... How do I change this?
<14> MAJOR BUG: Loading OpenOffice as normal user locks the system forcing a hard-reboot.
<2> alaricX: i'm not running the athlon64 with a 64bit kernel... it's on a 32bit kernel
<15> Hey, I had emerged xorg-server previously, but removed it and now compiled xorg-server by hand, but one problem exists: /usr/lib/xorg/extensions/libglx.so is a symlink to /usr/lib/opengl/xorg-x11/extensions/libglx.so ... which does not exist... how may I solve this problem?
<5> Doomhammer, Ah, alright then :P
<3> rake, tell the router the new hw adress?
<3> rake, btw what was wrong?
<14> I'm using ircii because everything I try to do in Xorg locks the system. =((((
<14> gentoo ****s.
<2> alaricx: i tried 64bit once, then i realized that getting some stuff to work was an absolute nightmare :O
<14> hard
<14> I mean it totally blows.
<10> roger55: which is the one for us-international layout?
<14> I've been using it for 3 years.
<14> and it keeps getting worse.
<5> Doomhammer, Amen. I've never used 64bit though. I've heard things ;)
<14> Every update breaks something.
<1> don't update
<3> atg, you think cause you use another nick reporting bugs here isn't useless?
<15> Roger55: Any ideas?
<13> roger55, dunno, I just used my other ethernet card and it worked :) . How do I "tell" the router that
<2> alarix: ha
<1> it's that simple :p
<4> elpargo: still doesn't seem to want to work...
<16> atg: you are probably using a lot of testing packages
<3> rake, in the router config there is probably some table what IP to ***ign to what mac address
<15> Anyone have any ideas about my problem?
<14> Well, many packages are sloooooow to come out of testing. =(
<7> AlfadorJanus, did u start the service?
<3> Capso, using eselect opengl set nvidia or something?
<17> HELLO!I would like to install gentoo, but i can't find an ISO for my i386. what is its name? ppc?
<4> elpargo: yah...
<18> Alex_BO, x86
<15> Roger55: set xorg-x11 ... that's what the eBuild does...
<14> and things like glest 2, which have been released for ages, still don't even compile.
<2> Alex_BO: x86
<17> Seadog, i can't find it there http://www.gentoo.org/main/en/where.xml
<14> argh...
<4> even restarted it after i took the eth0 oout of the INTERACES=
<15> Roger55: I didn't do that when I compiled... should I remove that symlink and do 'make install' again?
<18> http://bouncer.gentoo.org/?product=gentoo-2006.0-livecd&os=x86
<3> atg, if you want help be specific, if you want to whine go elsewhere.
<10> roger55: where do i find the list of the possible keymaps to use?
<14> at least my second monitor is working again...
<17> Doomhammer, Seadog i can find it only for the minimal cd
<3> Capso, er what?
<18> Alex_BO, the link I supplied ;)
<4> it even says it started ifplug: [ok]
<3> Capso, you didn't use emerge?
<4> then eth0 ... [ok]
<13> roger55, right, I found it, but I don't see a way to edit it
<4> but i can do ifconfig
<19> I have a probelm with ym user account - it wont let me sign in as root
<4> and there isn't anything there
<3> wsjunior, /usr/share/keymaps/ ....
<19> it says permsiion dnied
<18> OK, I have this block: [blocks B ] sys-apps/utempter (is blocking sys-libs/libutempter-1.1.2.1) which one should I unmerge?
<17> Seadog, this is a live cd. can i install it however?
<4> nothing in dmesg about it...
<18> Alex_BO, yeah
<15> Roger55: As I said in my question, I *USED* to use emerge, but them emerge -C'ed it and compiled it by hand.
<11> where is Loadable module support configured in the kernel
<18> it should include a stage tarball and a portage snapshot
<14> Okay, my evil professor has put up some important information about the next test in Word format, when I try to open it with crashzilla, it loads OpenOffice, when that happens the machine freezes during the OpenOffice splash screen... if I tried to rebuild Openoffice now, it'd finish about two days after the test... What do I do?
<14> Upgrade to windows?
<5> Seadog, libutempter is the best choice, i learned (i had the same prob)
<3> Capso, that's not a good idea. :(
<4> idunno what its deal is.......
<15> Roger55: Err... why not?
<18> AlaricX, ok, unmerging utemper it is :D
<9> atg: emerge openoffice-bin
<20> atg, Use openoffice-bin?
<17> Seadog, oooooh yeah ;-) thanks.byebye!
<15> Same config options.
<21> atg: boot onto knoppix and open there, or tell your professor you don't have access to Word
<22> this isn't a linux question, but can someone verify something? I'm having a lot of trouble pinging and connecting to google
<9> atg: maybe try abiword
<5> Seadog, but i unmerged utempter and then right afterwards emerged libutempter ;) so yeah
<20> atg, Or, I think koffice can open .doc...
<21> FWIW, openoffice works just fine here
<23> xgl is a pain in the ***
<19> so now I have to stay logged in as root otherwise I can do nothing much
<21> userathei: language
<4> elpargo: have any clue?
<24> AlaricX, what do utempter and libutempter do?
<23> lol
<23> forgot
<5> nimda562, Allow applications to write utmp files to somewhereorother. (If i recall the ebuild desc correctly)
<24> AlaricX, aha
<10> what should i type to have us-international layout right now? loadkeys what?
<3> Capso, because portage is the package manager and gentoo's setup breaks if you don't use packages/portage to manage them
<5> nimda562, "Library that allows non-privileged apps to write utmp (login) info, which need root access" :)
<3> wsjunior, loadkeys us
<10> roger55: thanks
<3> wsjunior, does that not work?
<25> why when i emerge php xorg is going to be installed
<19> what can I do to let my user acoount let me log in as root
<19> I deleted the account and created a new one
<19> but it still doesnt let me do it
<26> crudball did you add it to the wheel group ?
<9> crudball: add the user to the wheel group
<5> crudball: is the account in the wheel group?
<19> yes
<20> Hahaha
Return to
#gentoo
or
Go to some related
logs:
#perl
Coldplugging pci devices ...
discover-package dependencies ubuntu
spell kile ubuntu
UNMOUNTABLE_BOOT_PARTITION
#linux
#physics
adesklets flux
#lisp
make menuconfig + megaraid2 + sarge
|
|